• Journal of the Korea Society of Computer and Information
• /
• v.18 no.9
• /
• pp.11-19
• /
• 2013

Most modern computer systems employ cache systems in order to alleviate the access time gap between processor and memory system. The power dissipated by the cache systems becomes a significant part of the total power dissipated by whole microprocessor chip. Therefore, power reduction in the cache system becomes one of the important issues. Partial tag cache is the system for the least power consumption. The main power reduction for this method is due to the use of small partial tag matching, not full tag matching. In this paper, we first analyze the previous regular partial tag cache systems and propose a new address matching mechanism by using locality buffer and address compression. In simulation results, the proposed model shows 18% power reduction in average, still providing same performance level, compared to regular cache.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.541-544
• /
• 2012

Recently, RFID-based mobile robot navigation technology for the study is on the march. Obstacle avoidance using existing RFID tag technology, the target is immediately recognizable through Stored in the tag for obstacle size and shape information. However, this technique is not easy to recognize a moving obstacle. In this paper, in order to this solve problem, mobile robot obstacle avoidance system is proposed using smart RFID tags attached to the ultrasonic sensor. Proposed system used Smart RFID tag is designed to the 900Mhz tags attached ultrasonic sensors. And captured moving obstacles information deliver mobile robot. Mobile robot modify driving information through delivery information. And the system keeps track of the best driving route. Usefulness of the proposed system was confirmed by simulations and experiments.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.3
• /
• pp.115-122
• /
• 2011

In this paper, we present a method to estimate an accurate real-time sound source direction based on time delay of arrival by using generalized cross correlation with four cross-type microphones. In general, existing systems have two disadvantages such as system embedding limitation due to the necessity of data acquisition for signal processing from microphone input, and real-time processing difficulty because of the increased number of channels for sound direction estimation using DSP processors. To cope with these disadvantages, the system considered in this paper proposes hardware design for enhanced real-time processing using microphone array signal processing. An accurate direction estimation and its design time reduction is achieved by means of an efficient hardware design using spatial segmentation methods and verification techniques. Finally we develop a system which can be used for embedded systems using a sound codec and an FPGA chip. According to experimental results, the system gives much faster real-time processing time compared with either PC-based systems or the case with DSP processors.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.137-146
• /
• 2004

Laser Induced Breakdown Spectroscopy(LIBS) system is being developed as an in-situ analysis system for the radioactive waste glass in the cold crucible melter. In order to complete the LIBS system, a spectrometer, a detector, and a laser were structured. An ESA 3000 (LLA Instruments GmbH, Germany) including a calibrated Kodak KAF-1001 CCD detector was selected as the spectrometer. A Q-switched Nd-YAG Brilliant(Quantel, France) laser was selected as an energy source. As the first research stage, the excitation temperatures of Fe(I) as a function of the detector's delay intervals(500, 1000, 1500, 2000ns) were evaluated using the Einstein-Boltzmann equation. The optimized excitation temperature of Fe (I) was 7820k at the delay time of 1500㎱ using the 532nm Nd-YAG laser pulse. This LIBS system will be optimized under the real environment vitrification facility in the near future and then used to be in-situ analyzed the glass compositions in the melter qualitatively.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.164-164
• /
• 2011

최근들어 교량 건설 프로젝트는 그 규모가 방대해 졌을 뿐만아니라, 건설에 사용되는 장비 및 자재, 인력의 종류 또한 다양해 지고 있다. 이에 따라 종래 구조적 안전만을 추구하던 건설현장은 이러한 제반 요소들을 효율적으로 관리하여 경제성뿐만 아니라 시공의 효율성 까지 고려할 수밖에 없게 되었다. 따라서 건설 현장의 진도 및 자재, 인력관리는 현대 건설 산업의 주요 과제라 할 수 있다. 이에 따라 본 연구에서는 현장의 시공정보를 무선으로 송신할 수 있는 단말기 및 RFID를 이용하여 종래에 시행되던 작업을 자동화함으로써 작업의 편리성을 도모하고 이를 통하여 시간과 인력의 낭비를 줄일 수 있는 시공관리 시스템에 대한 모듈을 제안 하였다. 제안된 시스템은 3D모델을 기반으로 하여 진도 및 공비를 한눈에 알아볼 수 있는 방안을 제시한다. 사용자는 현재 진행되고 있는 공정을 3차원 모델에서 확인할 수 있으며, 현재까지 사용된 비용 및 공정률을 손쉽게 확인할 수 있다. 3D모델은 공사 시작 전 공정에 맞추어 분절된 형태로 제작되어 현장에서 송신한 위치정보가 통합관리 시스템에서 수신되면 해당 새그가 화면에 나타나게 된다. 3D모델은 공정시각화의 역할을 할 뿐만 아니라 각 새그에는 사용된 자재의 종류나 수량등이 DB화 되어 있어, 실시간으로 공사에 사용된 물량을 산출 할수 있도록 한다. 시공정보의 수신은 각 자재에 부착한 RFID태그를 직접 읽어서 송신하거나, 작업자가 시공상황을 단말기를 통하여 직점 송신함으로써 이루어지게 된다. 수집된 시공정보는 3D모델과 연계됨과 동시에 통합관리 시스템에 내장된 DB와 연결되어 사용 자재 및 물량에 대한 비용산출에 중요한 역할을 하게 된다. 현재 우리나라의 교량 시공 현장에서는 기성청구시 내역서를 기준으로 비용을 산정하게 되는데, 시공관리 통합 프로그램에서는 각 공정이 DB화된 내역서와 연계되어 3D모델에서 얻어진 물량으로 공비를 산출하는 과정이 자동으로 이루어지게 된다. 이러한 과정은 단일 현장뿐만 아니라, 공구 내의 여러 교량 현장에 대하여도 적용이 가능하므로, 방대한 현장의 공사관리에 소요되던 시간과 노력을 절감 할 수 있다. 본 연구를 통하여 현장에서 이루어지는 공사관리 작업에 대해 IT기술을 접목하여 자동화 할 수 있는 방법에 대한 알고리즘을 제시하였다. 이는 모바일 오피스 및 단말기를 이용하여 현 공정까지 사용된 물량, 인력, 장비 정보를 관리하는 한편, 현재까지 진행된 공사 내용을 3D모델을 통하여 한눈에 알아볼수 있는 교량 건설현장 통합관리 시스템의 모듈을 제공한다. 이에따라 공무 작업에 소모되는 인력 및 시간을 크게 절약 할 수 있을 것이라 판단된다.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.19-27
• /
• 2013

This paper implements the standby power control system composed of a master device and slave devices. The standby power is managed by cutting power supply after controlling the relay of a slave device based on the authentication of master device's RFID card. RFID interface and wireless communication module are embedded in a master device, and one master device is linked with many slave devices in wireless. Each slave device executes the operation needed in power control independently. We implements the function of manual power on/off system in a slave device, and the function of user ID enrollment by switch manipulation in a master device. Also this system can communicate bidirectionally in wireless and runs on TinyOS. The result of experiment shows that the user authentication is executed in a master device and this authenticated information is transmitted to a slave device in wireless, and standby power is cutted by controlling the relay of a slave device. Installing this system in a building or an office, we can expect energy saving.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.12
• /
• pp.36-46
• /
• 1999

As the requirements of embedded systems increase, the design complexity of the system becomes higher. The formal design methodology is required which supports well-balanced specification for control and dataflow to design a complex system. In this paper, control modules and function modules are separately described with FSMs and dataflow graphs respectively, and integrated into a system specification via inter-model communications. In previous approaches, the system could not be verified until control modules and dataflow modules are combined at the final design stage. However our approach enables us to design each part as the proper model of computation at early stage, and to verify the compositions and to co-synthesize the system effectively in the same framework. Especially this paper focuses on the communication protocols between control and dataflow models. Preliminary experiments show practicality of the proposed technique.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.438-453
• /
• 2014

This paper proposes a system to translate an RDB into an OWL ontology which enables the users to navigate the ontology in GUI. In order to accomplish the goals mentioned previously, the system overcame two difficulties. First, our system defines a new mapping algorithm to map between DB elements and ontology ones. Comparing with existing solutions, our algorithm is able to generate ontologies from more DB structures. Second, our system provides the same data generated by a reasoner to the users. Note that this operation does not load ABox ontology on a reasoner. In addition, Tableau-based reasoners have the tractability problem on a large ABox (e.g., large ABoxes translated from DBs practically cannot be served). To solve this, our system internally runs SQL queries to retrieve the same data as the one from a reasoner every time ABox elements are queried.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.203-209
• /
• 2015

Recently, the portion of electronic control in an engine system has been increasing with the aim of meeting the requirements of emissions and fuel efficiency of the engine system in the construction machinery industry. Correspondingly, the complexity of the engine management system (EMS) has increased. This study developed an engine HiLS system for reducing the cost and time required for function development for the EMS. The engine model for HiLS is composed of air, fuel, torque, and dynamometer models. Further, the mean value method is applied to the developed HiLS engine model. This model is validated by its application to a heavy-duty diesel engine equipped with an exhaust gas recirculation system and a turbocharger. Test results demonstrate that the model has accuracy greater than 90 and also verify the feasibility of the virtual calibration process.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.69-74
• /
• 2018

IP and SIP public broadcasting systems developed in Korea and abroad are developed in a Windows or Linux server environments and are installed in a server-rack structure, have high power consumption, and are difficult to remotely respond to system failures. In this paper, IoT platform is designed to connect IoT device and gateway to IoT service server by using internet service structure. We also designed a server based on embedded OS that can provide a variety of public safety management services according to the order of the server with built-in call processing and broadcasting function that can handle emergency calls and emergency broadcasts in public places using this structure. This server is interoperable with a variety of SIP-based call and broadcast devices that support the standard SIP and can be integrated with an in-house phone and on-premises system.