• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.13-22
• /
• 2005

This research aimed to generate two points of daylighting application as follows: 1) providing daylight performance data with a variety of glazing materials for a large window and 2) designing and evaluating an experimental type of differentiated window. For this purpose, we compared the daylight and distribution performance of new defined type of window configuration to the conventional window counterpart with a variety of glazing materials. The comparison was made for a deep, south-facing perimeter zone with large window, without any interior obstruction. The conventional window is the base single homogeneous glass pane, where as the differentiated window uses of two different glazings; an upper daylight glazing with high visible transmission and lower view window with lower transmittal glass. The daylight performance data was translated into a ratio between outdoor illuminance and the interiors. The simulated analysis of the conventional window indicates that the interior light levels have been changed proportionally dependent on the transmittance of the applied glass. The comparison of daylight distribution analysis showed that the differentiated window has lots of photometric advantage by the optical function of upper daylight window. In particular, the contribution of higher daylight window into deep rear space must be stressed for daylighting application.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.46-54
• /
• 2006

Recently, the important of a personal identification is increasing according to expansion using each on-line commercial transaction and personal ID-card. Although a personal ID-card embedded RFID(Radio Frequency Identification) tag is gradually increased, the way for a person's identification is deficiency. So we need automatic methods. Because RFID tag is vary small storage capacity of memory, it needs effective feature extraction method to store personal biometrics information. We need new recognition method to compare each feature. In this paper, we studied the face verification system using Hippocampal neuron modeling algorithm which can remodel the hippocampal neuron as a principle of a man's brain in engineering, then it can learn the feature vector of the face images very fast. and construct the optimized feature each image. The system is composed of two parts mainly. One is feature extraction using NMF(Non-negative Matrix Factorization) and LDA(Linear Discriminants Analysis) mixture algorithm and the other is hippocampal neuron modeling and recognition simulation experiments confirm the each recognition rate, that are face changes, pose changes and low-level quality image. The results of experiments, we can compare a feature extraction and learning method proposed in this paper of any other methods, and we can confirm that the proposed method is superior to the existing method.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.465-469
• /
• 2004

We propose a new training system for the improvement of equilibrium sense using unstable platform. This system consists of unstable platform, computer interface and various softwares. The unstable platform was a simple structure of elliptical-type which included tilt sensor and wireless RF module. To evaluate the effort of balance training, we measured the parameters such as the moving time to the target and duration to maintain cursor in the target of screen. Balance training was carried out for two weeks and we classified the subjects into two groups by the training program. As a result, the moving time was reduced and duration time was lengthened through the repeating training of equilibrium sense using training program of sine curve trace(SCT) and Block game. Especially, there was remarkable improvement at direction which was too difficult for the subjects to balance their body. It was showed that this system had an effort on improving equilibrium sense and might be applied to clinical use as an effective balance training system.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.69-78
• /
• 2009

One of the most effective way to improve cache performance is to exploit both temporal and spatial locality given by any program executive characteristics. In this paper we present a high performance and low power cache structure with a bank selection mechanism that enhances exploitation of spatial and temporal locality. The proposed cache system consists of two parts, i.e., a main direct-mapped cache with a small block size and a fully associative buffer with a large block size as a multiple of the small block size. Especially, the main direct-mapped cache is constructed as two banks for low power consumption and stores a small block which is selected from fully associative buffer by the proposed bank selection algorithm. By using the bank selection algorithm and three state bits, We selectively extend the lifetime of those small blocks with high temporal locality by storing them in the main direct-mapped caches. This approach effectively reduces conflict misses and cache pollution at the same time. According to the simulation results, the average miss ratio, compared with the Victim and STAS caches with the same size, is improved by about 23% and 32% for Mibench applications respectively. The average memory access time is reduced by about 14% and 18% compared with the he victim and STAS caches respectively. It is also shown that energy consumption of the proposed cache is around 10% lower than other cache systems that we examine.

• Ecology and Resilient Infrastructure
• /
• v.8 no.2
• /
• pp.112-119
• /
• 2021

In 2012, the National Park Service conducted an ecological health assessment to efficiently preserve and manage the ecosystem. The need for improving pre-existing management indicators was recognized from the revised Natural Park Act because, while the indicators of the existing evaluation system focused on endangered species, ecosystem disturbance, diversity, water quality (BOD, DO), and habitat fragmentation, they did not reflect the lack of indicators for marine ecological assessment, policy changes, and the time demands. The evaluation results comprised a five-point grading system, which made the analysis of immediate changes, difficult. Therefore, the benthic pollution index (BPI) and habitat restoration indicators were added to improve the evaluation system. The National Park was assessed using 10 classifications, however, only four classifications were evaluated. The ratings were divided into five states, and ten classes were presented as pictograms. The assessment results showed a similar trend as the indicators were improved, increasing from level 3 to level 5. However, the results of the Wolaksan National Park after improvement in the indicators were lower than that before the improvement, whereas, for the Juwangsan National Park, it was higher. This study aims at contributing to the scientific and systematic management of the national park ecosystem by improving the ecological health assessment system.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.619-625
• /
• 2023

In this paper, the remote care of medical beds with multiple body pressure sensors is described. Falling is one of the factors that seriously threaten the safety of patients and harm their health. In this study, a new bed was developed to overcome this. The bed system consists of a keyboard that can operate, a keyboard controller that manages the movement of the keyboard, a sensor that measures body pressure, a sensor controller that transmits and receives sensor values, a main controller that checks it and operates automatically or manually according to the algorithm, and a server that oversees all these information. The bed system checks the patient's location through a sensor and wirelessly alerts the server through the main controller when the patient determines that there is a risk of falling, so that the nurse or nurse can recognize the patient's dangerous condition. The server may receive state data transmitted from the wired/wireless terminal to monitor whether the bed system is operating normally. The controller of the keyboard operates a keyboard-type mechanism and automatically controls the prevention of bedsores connected by body pressure sensors to physically separate the area to which the patient's pressure is applied to prevent bedsores. The main controller checks the presence of the patient's bed and transmits it to the server. In conclusion, the proposed system can smart monitor the user's state and perform remote care.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.715-727
• /
• 2023

To provide detailed and appropriate meteorological information in mountainous areas, the Korea Forest Service has established an Automatic Mountain Meteorology Observation Station (AMOS) network in major mountainous regions since 2012, and 464 stations are currently operated. In this study, we proposed an optimal kriging technique with lapse rate correction to produce gridded temperature data suitable for Korean forests using AMOS point observations. First, the outliers of the AMOS temperature data were removed through statistical processing. Then, an optimized theoretical variogram, which best approximates the empirical variogram, was derived to perform the optimal kriging with lapse rate correction. A 500-meter resolution Kriging map for temperature was created to reflect the elevation variations in Korean mountainous terrain. A blind evaluation of the method using a spatially unbiased validation sample showed a correlation coefficient of 0.899 to 0.953 and an error of 0.933 to 1.230℃, indicating a slight accuracy improvement compared to regular kriging without lapse rate correction. However, the critical advantage of the proposed method is that it can appropriately represent the complex terrain of Korean forests, such as local variations in mountainous areas and coastal forests in Gangwon province and topographical differences in Jirisan and Naejangsan and their surrounding forests.

• Korean Journal of Environment and Ecology
• /
• v.14 no.2
• /
• pp.111-118
• /
• 2000

본연구는 울릉도의 성인봉과 태하령 지역의 산림 식생을 대상으로 199년 7-8월에 식생조사와 토양조사에 의한 너도밤나무 군락의 임분구조 및 DCCA ordination을 이용하여 분석한 결과는 다음과 같다. 1. 울릉도 산림의 중요치를 각 군락별로 살펴보면 너도밤나무-섬조릿대 군락에서 중요치가 높은 종은 너도밤나무, 우산고로쇠, 마가목, 섬단풍, 섬벚나무 등의 순으로 너도 밤나무-일색고사리 군락은 우산고로쇠 너도밤나무, 마가목 층층나무, 등수국 등의 순으로 나타났다 그리고 너도밤나무-큰두루미꽃 군락에서 중요치가 높은 종은 너도밤나무 우산고로쇠 등수국 마가목 음나무등의 순으로 솔송나무-섬잣나무 군락은 섬잣나무, 너도밤나무, 솔송나무, 회솔나무, 섬피나무 등의 순으로 나타났다. 2. DCCA ordination에 의하면 산림군락과 환경요인과의 상관관계는 다음과 같다 너도밤나무-섬조릿대 군락은 해발고가 높고 네 군락 중 토양수분이나 전절소 유기물 등이 많은 지역에 분포하고 있었다. 너도밤나무-일색고사리 군락은 해발고가 다른 군집보다 높고 토양수분이나 전질소, 유기물 등이 많아 너도밤나무-섬조릿대 군락과 매우 유사한 입지환경을 가진 지역이나 토성 중 clay 가 많이 함유된 지역에 분포하고 있었다. 너도밤나무-큰두루미꽃 군락은 해발고가 네 군락 중 중간지역에 분포하고 있으며 토양수분이나 유기물, 전질소 등도 중간인 지역에 분포하고 있었다. 솔송나무-섬잣나무 군락은 해발고가 낮고 토양수분이나 전질소, 유기물이 적고 sand가 많이 함유된 토양에 분포하고 있었다. 3. 울릉도 산림군락으 Shannon의 종다양도 지수는 0.5455~0.8801으로 비교적 낮은 수치를 나타내고 있다. 또한 너도밤나무 군락에서 분포하고 있는 주요 종의 조서열 중요치 곡선을 보면 전체의 기울기가 완만하여 너도밤나무 군락은 안정적이라 할 수 있다.단 생산성 향상을 위한 세포의 고농도 배양에는 조사한 여러 배양 시스템 중에 가장 효율적인 시스템임올 알 수 있었다 하지만 이 시스템 에서 포도당을 낮은 level로 유지할 수 있었으나, 초산의 과도한 축적으로 항체 생산성의 향상은 예상에 비해 크지 않았다. 81%), C18 0(12.38%), C18: 1(25.93%), C22:6(9.95%)이며 결합지방질(結合脂肪質)은 C14 : 0(11.60%), C16 : 0(18.94%), C16: 1(10.42%). C18 : 1(10.89%), C22 : 6(23.44%)이었다. 총필수지방산(總必須脂肪酸) 함량(含量)은 극성지방질(極成脂肪質)$(20.14{\sim}31.12%)$이 비극성지방질(非極成脂肪質)$(6.97{\sim}11.13%)$보다 훨씬 높았고, 결합지방질(結合脂肪質)이 유리지방질(遊離脂肪質)보다 높았으며 부위별(部位別)로는 피부(皮部)$(15.18{\sim}15.41%)$가 육질부(肉質部)$(6.97{\sim}11.13%)$보다 높았다. 또${\omega}3$고도부포화지방산(高度不飽和脂肪酸) 함량(含量)은 육질부(肉質部)$(15.15{\sim}28.32%)$가 피부(皮部)$(6.77{\sim}18.18%)$나 내장부(內臟部)$(8.35{\sim}9.74%)$보다 높았으며, 육질부(肉質部)에서는 극성지방질(極成脂肪質)$(26.28{\sim}34.18%)$이 비극성지방질(非極成脂肪質)$(15.15{\sim}28.32%)$보다 높았다.veral world-wide prediction models. Based on the analysis, we can easilty know

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.59-64
• /
• 2002

In the RFID system using ISM-band, The tag mounted at the object has used the DC power by rectifying the RF signals of the small antenna for operating the micro-controller and memory. The performance of the tag would be reduced because of the second harmonics generated by the nonlinearity of the semiconductor and the spurious signal excited the high order mode of the antenna. This paper has realized the novel type low-pass filter with "the Stub-I type DGS slot structure" to improve the efficiency of the tag by suppressing the harmonics. The optimized frequency character at the pass-band/stop-band has obtained by tuning the stub width and slit width of I type slot. The measured result of the LPF has the cutoff frequency 3.25 GHz, the insertion loss about -0.29~-0.3 dB at pass-band 2.4 GHz~2.5 GHz, the return loss about -27.688~-33.665 dB at pass-band with a good performance, and the suppression character is about -19.367 dB at second harmonics frequency 4.9 GHz. This DGS LPF may be applied the various application as the RFID, WLAN to improve the efficiency of the system by suppressing the harmonics and spurious signals. 

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.1
• /
• pp.6-25
• /
• 2002

In this paper, we have implemented UPnP Devices which emulate a Control Point, a Light Controller, and a Digital TV. The Control Point has been developed on Linux host system by using C language. The UPnP Devices emulating the Digital TV and Light Controller are running on embedded linux developer board. For the development of UPnP Devices, UPnP SDK API Vl.04 made by Intel Co. Ltd. has been ported on Assabet Linux Reference board to implement the UPnP protocol. After we analyze and design some services of Digital TV device, we have applied UPnP Device program to those devices. UPnP SDK vl .04 consists of APIs which support HTTP, SSDP, SOAP, GENA and XML DOM Level-1 that are cores of UPnP protocol. The C program written for the UPnP Control Point has been compiled and executed on Linux-based PC. The embedded system running on Embedded Linux OS has been connected all together through Ethernet which allows IP-based communications. Under this environment, the UPnP programs are being executed on each device. Control Point, when in operational mode, discovers UPnP Devices on the network and displays the device list on the consol. By selecting one of the functionalities of the device services that are displayed on the Control Point, the controllability has been accomplished. The experiment that we performed in this thesis have revealed that the Control Point and UPnP Devices have supported the protocols including SSDP, SOAP, GENA, and DHCP.