• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.1
• /
• pp.51-66
• /
• 2022

SST (Sea Surface Temperature) is based on the atmosphere-ocean interaction, one of the most important mechanisms for the Earth system. Because it is a crucial oceanic and meteorological factor for understanding climate change, gap-free grid data at a specific spatial and temporal resolution is beneficial in SST studies. This paper examined the production of daily SST grid maps from 137 stations in 2020 through the ordinary kriging with variogram optimization and their accuracy assessment. The variogram optimization was achieved by WLS (Weighted Least Squares) method, and the blind tests for the interpolation accuracy assessment were conducted by an objective and spatially unbiased sampling scheme. The four-round blind tests showed a pretty high accuracy: a root mean square error between 0.995 and 1.035℃ and a correlation coefficient between 0.981 and 0.982. In terms of season, the accuracy in summer was a bit lower, presumably because of the abrupt change in SST affected by the typhoon. The accuracy was better in the far seas than in the near seas. West Sea showed better accuracy than East or South Sea. It is because the semi-enclosed sea in the near seas can have different physical characteristics. The seasonal and regional factors should be considered for accuracy improvement in future work, and the improved SST can be a member of the SST ensemble around South Korea.

• Geophysics and Geophysical Exploration
• /
• v.17 no.2
• /
• pp.88-94
• /
• 2014

Due to mechanical failure or geographical accessibility, the seismic data can be partially missed. In addition, it can be coarsely sampled such as crossline of the marine streamer data. This seismic data that irregular sampled and spatial aliased may cause problems during seismic data processing. Accurate and efficient interpolation method can solve this problem. Futhermore, interpolation can save the acquisition cost and time by reducing the number of shots and receivers. Among various interpolation methods, the Matching Pursuit method can be applied to any sampling type which is regular or irregular. However, in case of using sinusoidal basis function, this method has a limitation in spatial aliasing. Therefore, in this study, we have developed wavelet based Matching Pursuit method that uses wavelet instead of sinusoidal function for the improvement of dealiasing performance. In addition, we have improved interpolation speed by using inner product instead of L-2 norm.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06a
• /
• pp.139-142
• /
• 1996

움직임 보상형 프레임간 내삽기법은 다른 동영상 압축기법과 함께 사용함으로써, 그 압축효과를 더욱 향상시킬 수 있는 장점을 가지고 있다. 그러나 블록에 기반한 기존의 움직임 보상형 프레임간 내삽기법을 움직이는 물체의 경계에서 심한 블록효과를 보인다. 본 논문에서는 Quad-tree 기법을 이용해 화소단위의 움직임을 추정하고, 이를 이용해 드러난 영역과 가리워지는 영역을 정확 히 예측해 보상함으로써 움직이는 물체의 경계에서 나타나는 블럭효과를 제거했다. 그리고 제안된 방법에서는 순방향이나 역방향 움직임추정 시 송신측으로 부터 보내지는 움직임 벡터를 이용함으로써 움직임 추정을 위해 소요되는 계산량을 최소화하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.27-36
• /
• 2006

Conventionally, in order to get accurate geolocation of satellite images we need a set of ground control points with respect to individual scenes. In this paper, we tested the possibilities of modeling satellite orbits from individual scenes by establishing a sensor model for one scene and by applying the model, which was derived from the same orbital segment, to other scenes that has been acquired from the same orbital segment. We investigated orbit-attitude models with several interpolation methods and with various parameter sets to be adjusted. We used 7 satellite images of SPOT-3 with a length of 420km and ground control points acquired from GPS surveying. Results of the conventional individual scene modeling hardly introduced differences among different interpolation methods and different adjustment parameter sets. As the results of orbit modeling, the best model was the one with Lagrange interpolation for position/velocity and linear interpolation for attitude and with position/angle bias as parameter sets. The best model showed that it is possible to model orbital segments of 420km with ground control points measured within one scene (60km).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.144-144
• /
• 2012

하천 제방의 안정성을 평가하기 위해서는 홍수시 제방 주변의 흐름특성을 분석하는 것이 필요하다. 일반적으로 홍수시 유속은 측정된 홍수량을 이용한 단면평균유속을 이용하여 평가를 하고 있기 때문에 제방 주변의 흐름특성을 정확하게 분석하는데 한계가 있다. 이를 개선하기 위해서는 홍수시 제방 주변의 유속을 측정하여야 하는데 접근이 어렵고 위험하기 때문에 봉부자 또는 유속계를 이용한 유속측정이 어려운 실정이다. 이와 같은 경우 제방 주변의 영상 분석을 이용한 표면영상유속계의 활용이 좋은 대안이 될 수 있다. 표면영상유속계의 경우 원거리에서도 줌을 이용하여 영상을 획득할 수 있고, 측정 시간이 짧기 때문에 제방 주변의 유속을 간편하게 측정 가능하다. 하지만 표면영상유속계(SIV)는 영상좌표와 물리좌표 사이의 좌표 변환을 필요로 한다. 종전까지는 일반적으로 8-변수 좌표 변환법이 널리 이용되었으나, 이 방법은 최소한 4점 이상의 참조점이 필요하기 때문에 수면위에 참조점을 설치해야 하는 어려움이 있다. 또한, 내삽을 하는 방법이기 때문에 참조점 내부의 점에 대해서는 비교적 정확한 변환이 가능하지만, 참조점 외부의 좌표들에 대해서는 부정확한 변환이 되는 단점이 있었다. 따라서 본 연구에서는 카메라 모형을 이용하여, 새로운 좌표 변환식을 유도하였다. 이 영상좌표 변환식은 참조점을 이용하지 않으며, 수면과 카메라간의 연직 거리와 카메라의 기울어진 각도만을 이용하여 좌표 변환이 가능한 방법이다. 참조점을 필요로 하지 않기 때문에 측량의 번거로움이 없으며, 변환식내에서 내삽을 하지 않기 때문에 영상 전체에 대해 고른 좌표 변환이 가능한 장점을 지니고 있다.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.185-198
• /
• 2023

In marine seismic surveys, the inevitable occurrence of trace gaps in the near offset resulting from geometrical differences between sources and receivers adversely affects subsequent seismic data processing and imaging. The absence of data in the near-offset region hinders accurate seismic imaging. Therefore, reconstructing the missing near-offset information is crucial for mitigating the influence of seismic multiples, particularly in the case of offshore surveys where the impact of multiple reflections is relatively more pronounced. Conventionally, various interpolation methods based on the Radon transform have been proposed to address the issue of the nearoffset data gap. However, these methods have several limitations, leading to the recent emergence of deep-learning (DL)-based approaches as alternatives. In this study, we conducted an in-depth analysis of two representative DL-based studies to scrutinize the challenges that future studies on near-offset interpolation must address. Furthermore, through field data experiments, we precisely analyze the limitations encountered when applying previous DL-based trace interpolation techniques to near-offset situations. Consequently, we suggest that near-offset data gaps must be approached by extrapolation rather than interpolation.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2001.06a
• /
• pp.153-156
• /
• 2001

한 지점의 매시 기온 관측값에는 이 지점의 수평 및 수직 위치, 주변 식생, 하천이나 바다 등, 모든 기온결정인자의 영향이 녹아있다고 볼 수 있다. 만약 지표 특성이 이들 관측지점과 동질적이며, 관측점들의 표고에 의해 그 지형이 정확히 표현될 수 있는 넓은 지역이 있다면, 기존의 거리 역산가중법(Inverse Distance Weighting: IDW)에 의해 내삽되는 기온의 공간변이는 실제 기온의 공간변이와 일치할 것이다.(중략)

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.1
• /
• pp.43-48
• /
• 1986

To improve the accuracy of the interpolation point of the digital terrain models, this paper compared the methods of terrain data acquisition and the equations of the curved surface

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.3
• /
• pp.74-99
• /
• 2022

Surface ozone is produced by photochemical reactions of nitrogen oxides(NOx) and volatile organic compounds(VOCs) emitted from vehicles and industrial sites, adversely affecting vegetation and the human body. In South Korea, ozone is monitored in real-time at stations(i.e., point measurements), but it is difficult to monitor and analyze its continuous spatial distribution. In this study, surface ozone concentrations were interpolated to have a spatial resolution of 1.5km every hour using the stacking ensemble technique, followed by a 5-fold cross-validation. Base models for the stacking ensemble were cokriging, multi-linear regression(MLR), random forest(RF), and support vector regression(SVR), while MLR was used as the meta model, having all base model results as additional input variables. The results showed that the stacking ensemble model yielded the better performance than the individual base models, resulting in an averaged R of 0.76 and RMSE of 0.0065ppm during the study period of 2020. The surface ozone concentration distribution generated by the stacking ensemble model had a wider range with a spatial pattern similar with terrain and urbanization variables, compared to those by the base models. Not only should the proposed model be capable of producing the hourly spatial distribution of ozone, but it should also be highly applicable for calculating the daily maximum 8-hour ozone concentrations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.496-499
• /
• 2004

컴퓨터와 다양한 software의 보급과 함께 흐름의 수치해석 분야는 급속한 발전을 보게 되었고 고도의 수치해법이나 복잡한 경계 처리 등을 통해 실제현상과 같은 흐름해석을 가능케 하고 있으며, 이러한 수치해석을 위해 정확한 Bathymetry는 필수적이다. 본 연구에서는 등 격자간격의 수심도 생성을 위하여 전자해도를 작업에 적합하게 수정하고 부족한 조간대의 수심자료는 보완하고, 파일형식에 따른 적절한 프로그램밍 언어를 통하여 해도상 지점들의 수심자료를 획득하고 내삽하여 기존에 사용되는 방법에 비하여 비교적 간단하고 해도의 정보를 정확하게 반영하는 Bathymetry를 생성하는 기법을 제안하였다.