• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.80-80
• /
• 1994

세라믹막을 이용한 oil 폐수 처리의 기초 연구로서 정밀여과용 세라믹막의 제조와 oil(kerosene)-in-water 타입 에멀젼에 대한 막분리 효율이 연구되었다. 정밀여과 막으로서는 압출(extrusion)법으로 성형하여 제조한 $\alpha$-알루미나 튜브(평균 기공크기 0.9 $\mum$)와 이들 튜브(담체)내부에 $ZrO_2$ 또는 $Al_2O_3$ 다공성 박막을 코팅한 2층 구조의 복합막들을 사용하였다. 담체의 높은 투과율 ($1700 l/m^2\cdot h$ at $\Deltap = 1$ atm)을 어느정도 유지하면서 막분리 효율을 증대시킬 수 있는 새로운 슬러리 코팅법이 개발되엇으며, 코팅후 950-1300$\circ$C 에서 열처리한 코팅층의 두께와 평균 기공크기는 각각 5 - 20 $\mum$정도 이었다. 정밀여과막의 특성평가를 위하여 막 제조조건에 따른 코팅층의 두께 및 결함유무를 SEM으로 일단 관찰한 후에 Bubble Point Test와 Mercury Porosimeter를 이용하여 측정한 최대 및 평균 기공반경과 물의 투과량으로부터 막 전체에 대한 결함 유무와 결함의 허용한도등을 비교 분석하였다.

• Convergence Security Journal
• /
• v.11 no.2
• /
• pp.13-24
• /
• 2011

Policemen judge the situations rationally and use their equipment such as handcuffs and rope within the purview, finding them needed to arrest criminals in the act who commit crimes which conforms to death penalty, life imprisonment or long imprisonment for over 3 years in accordance with Clause 10-2, Article 1 of the Police Mandate Law and prevent fleeing from them, defend their and others' lives and bodies, or if there are probable causes to be recognized that using equipment is necessary to restrain the interference with government officials in the execution of their duties. However, as the cases which the criminals run away in handcuffs or with both hands tied occur, it results in the waste of police force, distrust and enormous trouble in the pursuit of their duties. Therefore, if the way to perceive fleeing of criminals who have already worn the police equipment by some simple assistive devices without developing other new equipment, it will be very effective for police duties. This study is about the combination apparatus for fugitive prevention attached to the existing handcuffs and rope whose alert sounds let the staffs working inside the office perceive the fleeing of wanted criminals and examined suspects who wear the handcuffs or are tied up with rope, providing that they go through the exit where a transmitter and a receiver were set. The combination apparatus for fugitive prevention which the study introduces contains the connecting parts which connect a flexible tube(cognition tags inside of the tube) of connector equipped with the police equipment with the ends of the tube and the part where these two meet and which connect them inside of the tube. The connecting parts are easy to be attached to the police equipment such as handcuffs and rope, but hard to be dismantled by the people tied up with the equipment. It enables watchers to perceive the fleeing of wanted criminals and examined suspects who wear the handcuffs or are tied up with rope, providing that they go through the exit where a transmitter and a receiver were set. Plus, if it is combined together with the portable receiver, it can be installed on the patrol cars and easily adopted to supervise illegally accessing of evidences. It is also avaliable to be adjunctively utilized for the handcuffs provided and the cost is so reasonable. Owing to its snap-on way to the cuffs, it can clear up any invasion of privacy and it can not be used as a self-injury tool because of the soft tube. Using AM Tag minimizes the lack of malfunction.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.57-57
• /
• 2017

Water line은 UV 처리된 호스의 내부에 압력보상 기능이 첨부된 경질의 미로 튜브를 끼워 사용하도록 제작되어 있다. 점적 호스의 외경은 15.8mm이며 대부분 0.5~2.5bar 사이의 압력에 1.5~3.0 L/hr의 유량을 공급한다. 따라서 전적 호스의 내부에 위치한 경질 미로 튜브의 설계는 유량의 압력보상에 밀접한 관계가 있다. 본 연구에서는 경질 미로 튜브를 통과하는 작은 돌기의 수가 압력과 유량에 어떤 영향을 미치는지에 대한 기초적인 실험을 수행하였으며 경질 미로의 압력과 유량 특성에 따른 이론적 해석과의 비교분석을 통하여 새로운 미로의 형상 설계에 활용할 기초적 연구를 수행하고자 하였다. 점적 호스의 성능은 길이(보통 300~400m)에 대한 유량의 균등성을 유지하는 것이며 균등성은 압력보상에 의해 이루어진다. 원통형 미로는 점적 호스의 내부에 삽입되어 원통 부분에 형성된 미로의 길이에 따른 유량의 균등성을 유지하도록 설계되어 있다. 점적 호스의 원통 주변에는 8개의 미로로 구성되어 있으며 미로의 길이를 금속 평면으로 금형 제작하여 투명판에서 미로의 형상을 보이게 하였다. 또한 입구부분에 물을 공급하고 미로의 각 위치별 배출구를 설치하여 압력에 따른 유출량을 전자저울에 측정하여 압력별 유량의 균등성에 대한 데이터를 측정하였다. 유입구의 압력을 0.5, 1.5, 2.5, 3.0bar로 각각 공급하였으며 유출량은 미로의 8개 구간에 따라 측정하였다. 경질 미로의 유출량은 미로의 길이가 짧을수록, 압력이 커질수록 유출량이 높게 나타났다. 또한 미로의 길이가 짧을 경우에는 유출량의 차이가 비교적 크게 나타났으나 미로의 길이가 길수록 압력에 대한 유출량에 대한 차이가 크지 않음을 알 수 있었다. 따라서 경질 미로에서 미로의 길이를 길게 할 경우에는 유출량을 비교적 균일하게 할 수 있음을 보여주고 있다. 반면에 미로의 길이가 길어질수록 압력변화에 따른 유출량이 지수적으로 감소함을 나타내고 있다. 미로의 길이가 7번과 8번에서는 상당히 균일한 성능을 보여주므로 경질 미로의 배출구를 전체적으로 모두 활용함으로써 압력보상을 비교적 균일하게 할 수 있음을 보여주고 있다. 압력보상은 탄성을 가진 실리콘과 미로로 구성될 경우에 가장 큰 효과를 나타내지만 점적 호스와 같이 경질 미로만으로 압력보상을 해야 할 경우에는 경질 미로의 길이가 매우 중요하다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1429-1436
• /
• 2011

In this paper, a new tube-radius-measuring algorithm has been proposed for effectively measuring the radii of small tubes under severe noise conditions that can also perform well when metal scraps that make it difficult to measure the radius correctly are inside the tube hole. In the algorithm, we adopt a fuzzy searching method that searches for the center of the inner circle by using fuzzy parameters for distance and orientation from the initial search point. The proposed algorithm has been implemented and tested on both synthetic and real-world tube images, and the performance is compared to existing circle-detection algorithms, such as the Hough transform and RANSAC methods, to prove the accuracy and effectiveness of the algorithm. From this comparison, it is concluded that the proposed algorithm has excellent performance in terms of measurement accuracy and computation time.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.253-260
• /
• 2016

In this paper, derivation of the STL (Sound Transmission Loss) of the double plates installed in an impedance tube is discussed using an analytic method, where an air cavity exists between the plates. Vibration of the plates and sound pressure field inside the tube are expressed in terms of infinite series of modal functions. Under the plane wave assumption, it is shown that consideration of the first few modes yields sufficiently accurate results, and locations of peaks and dips are investigated. It is determined that the peak frequencies of the double plates coincide with those of each single plate. When the two plates are identical, the STL of the double plates as well as that of the single plate become zero at the natural frequencies of the single plate. The location and amplitude of the dips are investigated using an approximation solution when the cavity depth is very small.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.99.1-99.1
• /
• 2017

$TiO_2$는 기계적, 화학적 안정성이 높아 가혹한 화학적 환경 또는 고온 운전 조건에서 훌륭한 내구성을 보여주어 산업적으로 일찍이 널리 이용되어 왔다. 예를 들어, 염소발생 (chlorine evolution reaction) 또는 산소발생반응은 (oxygen evolution reaction) 염소 또는 산소 라디칼에 전극이 지속적으로 노출되기에 강한 내부식성을 지닌 전극재가 요구되었고, 그 결과 $TiO_2$를 골조로 한 불용성전극 (dimensionally stable anode)이 개발되어 이용되고 있다. 그러나, $TiO_2$는 절연성이 높은 금속 산화물 재료이기 때문에 넓은 표면적 획득 및 촉매제 사용을 통해 소재의 단점을 극복해야만 한다. 넓은 반응 표면적 획득의 한 방법으로써 전기화학적 양극산화 (electrochemical anodization)를 통한 $TiO_2$ 나노튜브 제조법은 경제적이면서도 구조 제어도 간편한 방법이다. $TiO_2$ 나노튜브는 100nm 전후의 기공 크기를 가짐과 동시에 매우 높은 종횡비를 지니고 있어 넓은 반응 표면적 획득에 특히 유리하다. 그러나, 이 높은 종횡비는 촉매 도입을 어렵게 하는 저해요소가 되기도 한다. 이러한 문제를 해결하기 위하여 다양한 방법들이 연구되었으나 대부분이 번거롭거나 비싼 후단공정을 필요로 한다. 본 연구에서는 $TiO_2$ 나노튜브에 촉매를 도핑하기 위한 간단한 전기화학적 방법으로, 단일공정 양극산화법 (single-step anodization)과 전압충격법 (potential shock), 그리고 저전압충격법 (under potential shock)을 연구하였으며 이에 적용 가능한 촉매제의 종류를 소개한다. 또한, 촉매의 성질에 따른 응용분야와 그 성능평가 결과를 제시한다.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.465-472
• /
• 2009

The technologies for improving the capacity of hydrogen storage were investigated and the recent data of hydrogen storage by using various porous carbon materials were summarized. As the media of hydrogen storage, activated carbon, carbon nanotube, expanded graphite and activated carbon fiber were mainly investigated. The hydrogen storage in the carbon materials increased with controlled pore size about 0.6~0.7 nm. In case of catalyst, transition metal and their metal oxide were mainly applied on the surface of carbon materials by doping. Activated carbon is relatively cheap because of its production on a large scale. Carbon nanotube has a space inside and outside of tube for hydrogen storage. In case of graphite, the distance between layers can be extended by intercalation of alkali metals providing the space for hydrogen adsorption. Activated carbon fiber has the high specific surface area and micro pore volume which are useful for hydrogen storage. Above consideration of research, porous carbon materials still can be one of the promising materials for reaching the DOE target of hydrogen storage.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.285-290
• /
• 2004

Nondestructive damage sensitivity of carbon nanotube(CNT) and nanofiber (CNF)/epoxy composites with their adding contents was investigated using electro-micromechanical technique. Carbon black (CB) was used only for the comparison with CNT and CNF. The fracture of carbon fiber was detected by acoustic emission (AE), which was correlated to the change in electrical resistance, ΔR under double-matrix composites (DMC) test. Stress sensing on carbon nanocomposites was performed by electro-pullout test under uniform cyclic loading. At the same volume fraction, the damage sensitivity for fiber fracture, matrix deformation and stress sensing were highest for CNT/epoxy composite, whereas for CB/epoxy composite they were the lowest among three carbon nanomaterials (CNMs). Damage sensitivity was correlated with morphological observation of carbon nanocomposites. Homogeneous dispersion among CNMs could be keying parameters for better damage monitoring. In this study, damage sensing of carbon nanocomposites could be evaluated well nondestructively by the electrical resistance measurement with AE.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.53-65
• /
• 2007

Column tests were performed for a new type of column, the internally confined hollow concrete filled tube column (ICH CFT column), to evaluate its seismic performance. The seismic performances for two types of ICH CFT columns and a general solid RC column were evaluated and compared by quasi-static tests. The displacements and the lateral loads of column specimens were measured during tests. Ductilities, absorbed energy, equivalent damping ratios, damage indices were calculated from recorded data. From the test results, the ICH CFT column shows superior seismic performances with double moment capacity and larger energy absorbing capacity over that of a solid RC column.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.56-62
• /
• 2009

In this paper we investigate an analytical approach for noise properties and geometric structure in Computed Radiography(CR) images of industrial steel-tubes. Over thirty diverse radiographic images are sampled from industrial radiography measurements according to radiation intensity. Each image consists of three regions; background, thickness and inner-tube. Among these the region of inner-tube is selected for the object of analysis. Geometric structure which includes the noise generation is analyzed by the statistical and functional methodology. The analysis is carried on spacially and line by line. It verifies the geometrical transfigure from the circle configuration of steel-tube and noise variation. The estimation of fitting function and its error are the geometric factors. The statistics such as standard deviation, mean and signal-to-noise ratio are noise parameters for discrimination. These factors are considered under the intensity variation which is the penetrative strength of radiation. The analysing results show that the original geometry of circle is preserved in the form of elliptic or short/long diameter circle, and the noise deviation has increased inverse proportional to the radiation intensity.