• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.3
• /
• pp.227-234
• /
• 2014

Fuel consumption rates of electric vehicles strongly depend on their battery performance. Because the battery performance is sensitive to the operating temperature, temperature management of the battery ensures its performance and durability. In particular, the temperature distribution among modules in the battery pack affects the cooling characteristics. This study focuses on the thermal modeling of a battery pack to observe the temperature distribution among the modules. The battery model is a prismatic model of 10 NiMH battery modules. The thermal model of the battery consists of heat generation, convective heat transfer through the channel and conduction heat transfer among modules. The heat generation is calculated by the electric resistance heat during the charge/discharge state. The model is used to determine a strategy for proper thermal management in Electric vehicles.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.270-275
• /
• 2008

Crack growth characteristics of elastomeric materials are an important factor determining the strength and durability. In this study, the fatigue crack growth characteristic of filled EPDM compounds with different reinforcing fillers, such as silica and carbon black, was investigated using a newly designed tester. Frequency and test temperature had significant effects on the fatigue crack growth. The crack growth rate decreased with increasing frequency and the rate increased with increasing temperature. A power law relationship between the tearing energy and crack growth was observed for filled EPDM compounds. The crack growth rate reduced with increasing filler contents. Silica filled EPDM showed a better fatigue resistance than carbon black filled EPDM. The crack growth rate of silica filled EPDM decreased up to 30 phr and increased again at 50 phr. The formation of microductile type pits was observed on the fatigue-failure surface of unfilled EPDM, and relatively coarse surface with randomly distributed tear lines was observed on the failure surface of silica filled EPDM.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.30-30
• /
• 2011

산업화 과정에 방출된 할로겐 화합물 및 프레온 가스가 오존층을 파괴하면서 많은 양의 자외선이 지표에 도달하여 생태계에 적지 않은 영향을 끼치고 있다. 자외선은 살균, 소독작용 및 Vitamin D 합성을 위해 생명체에 필수적이지만 과다할 경우 색소침착, 피부노화, 피부암 발생, 백내장의 증가, 면역기능저하 등의 피해를 준다. 자외선은 파장 영역에 따라 UV-A(장파장 자외선), UV-B(중파장 자외선)및 UV-C(단파장 자외선)으로 나뉜다. 이 중 인체에 가장 유해한 것으로 알려진 단파장의 UV-C는 파장이 짧아 침투력이 미약해 오존층과 성층권에서 대부분 흡수되므로 생물학적으로 큰 의미는 없다. 그러나 자외선 중 UV-B와 UV-A 영역의 자외선은 인체에 영향을 가장 많이 미치므로 이들 영역의 자외선을 차단하는 것이 필요하다. Vitamin C는 아스코르브산(ascorbic acid)이라고도 불리며 미백효과, 주름 개선, 자외선 차단 및 항산화 작용을 하지만 섬유가공 시 Vitamin C는 쉽게 산화되며 세탁 내구성이 떨어지기 때문에 가교제를 필요로 한다. Vitamin C를 이용하여 자외선 차단성 섬유제품을 개발하기 위해, 포름알데히드를 유리하지 않는 폴리카르복시산 가교제 중 하나인 Citric Acid(CA)를 사용하여 고온에서 면직물에 처리했을 때 에스테르 형 가교를 형성하여 내세탁성을 가질 수 있었다. 자외선 차단 효과를 알아보기 위하여 KS K 0850 섬유제품의 자외선 차단율 및 차단지수 시험방법으로 평가하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.2
• /
• pp.75-86
• /
• 2012

This paper presents some research results on the shrinkage characteristics and frost resistance before and after cracking of FR-ECC(Fire Resistance-Engineered Cementitious Composite). Also, a waterstop performance and exfoliating resistance of multi-layer lining specimens using FR-ECC and flexural performance of beam member by repaired FR-ECC are estimated in this paper. Experimental results indicate that the plastic shrinkage crack and length change ratio of FR-ECC have been reduced as compared with that of the existing repair mortar, and that its crack resistance on the dry shrinkage is improved under the confining stress. As well as FR-ECC has been great in the frost resistance and its tensile properties under the cracked state have been not reduced by freezing and thawing reaction. In addition, beam member by repaired FR-ECC have been increased in the flexural properties such as initial crack moment, yeild moment, and its crack width has been controled in a stable by the frexural failure.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.83-92
• /
• 2018

The lapse of time may cause in the slope structure various deterioration phenomenon progresses in the ground of slope, and collapse due to deterioration of strength, resulting in a decrease in the service life. The approach to slope stability due to the ground deterioration is a different concept from the existing limit equilibrium analysis, which is limited to the physical characteristics and geometrical structure of ground. In this study, we conducted a comparative analysis of various literature studies related to the slope failure characteristics and behaviors to presented the optimal formulas for shear strength reduction, such as the exponential function, the logarithmic function and the inverse hyperbolic function. And then a case study was performed on cut slope of Gyeongbu High Speed Rail construction site along the Yangsan fault zone, where the slope failure of shale layer vulnerable to deterioration occurred. As a result, it was confirmed that landslide occurred due to reduction of shear strength by deterioration, as safety factor is approx. 1.0 at the time when the slope failure occurred. Based on the comprehensive case study, as a quantitative approach to the evaluation of slope stability due to deterioration of ground, finally we propose a method for evaluating slope stability with optimal strength reduction curves.

• Composites Research
• /
• v.34 no.3
• /
• pp.174-179
• /
• 2021

Currently, fluid transfer steel pipes take a lot of time and expense to maintain all facilities due to new construction and painting or corrosion and aging. Therefore, this study was conducted for designing a CFRP pipe structure with high corrosion resistance and chemical resistance as a substitute for steel pipes. The helical/hoop pattern was cross-laminated to improve durability, and HNT was added to suppress the moisture absorption phenomenon of the epoxy. The HNT/CFRP pipe was manufactured by a filament winding process, and performed a mechanical property test, and a moisture absorption test in distilled water at 70℃. As a result, the highest bending strength was obtained when the hoop pattern was laminated with a thickness equivalent to 0.6% of the pipe. The 0.5 wt% HNT specimen had the highest moisture absorption resistance. Also, the delamination phenomenon at the interlayer interface was delayed, resulting in the lowest strength reduction rate.

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.377-386
• /
• 2009

A reference diffusion coefficient model from ACI life-365 is drawn from test results by NT build 443. This test method gives a time-averaged diffusion coefficient during immersion period, thus the ACI model uses the time-averaged diffusion coefficient as a reference value. ACI model needs to be revised, considering the difference between the time-average value and reference value at specified time. In this study, firstly the analytic solutions of diffusion equation are derived considering the initiation time and period of exposure to chloride, and secondly the time-averaged diffusion coefficient from NT build 443 is converted into the diffusion coefficient at reference time. From this study, the reference diffusion coefficient of ACI model should be modified to be about 10% larger values than those of present ACI model. For convenient design of service life, previous relationship between the chloride diffusion coefficient from NT build 443 and that from NT build 492 is also modified. To compare the chloride diffusion coefficients of ACI and JCI models, the reference chloride diffusion coefficient with respect to the JCI model is drawn in the similar form of ACI model's, and service life prediction by ACI life-365 method is confirmed to give a conservative result.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.5
• /
• pp.25-35
• /
• 2014

The sedimentary rocks exposed around Mt. Palgong were subjected to metamorphism due to a granitic magma intrusion at late Cretaceous, and they eventually metamorphosed to hornfels by the action of both hydrothermal solution and high temperature supplied from the magma. The hornfels zone around the granite body ranges from 2.0 to 3.5 km in width but the boundary between hornfels and sedimentary rocks is not obviously defined because the metamorphic grade gradually decreases with distance from the granite boundary. A series of laboratory tests on 350 core specimens made by 35 fresh rock blocks obtained from 5 selected locations around Mt. Palgong are performed to verify the variation of physical and mechanical properties related to metamorphic grade of the rock. Water content and absorption ratio of the hornfels linearly increase with distance to the granite boundary whereas dry unit weight, p-wave velocity, point load strength, and slake durability index linearly decrease with the distance. These results imply that the metamorphic grade of the hornfels also linearly decrease with the distance to granite boundary. Empirical equations for the variation of properties with the distance to granite boundary and relationship between a property and another one are deduced by regression analyses. And a criteria for classification of hornfels exposed in the study area based on the P-wave velocity and point load strength is proposed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.1
• /
• pp.39-45
• /
• 2016

Thermal management of a fuel cell is important to satisfy the requirements of durability and efficiency under varying load conditions. In this study, a linear state feedback controller was designed to maintain the temperature within operating conditions. Due to the nonlinearity of automotive fuel cell system, the state feedback controller results in marginal stable under load condition from $0.5A/cm^2$ to $0.7A/cm^2$. A PWM (Pulse Width Modulation) and the modified state feedback controller are applied to control the temperature under the load condition from $0.5A/cm^2$ to $0.7A/cm^2$. The cooling system model is composed of a reservoir, radiator, bypass valve, fan, and a water pump. The performance of the control algorithm was evaluated in terms of the integral time weighted absolute error (ITAE). Additionally, MATLAB/SIMULINK$^{(R)}$ was used for the development of the system models and controllers. The modified state feedback controller was found to be more effective for controlling temperature than other algorithms when tested under low load conditions.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.51-63
• /
• 2007

The biodeterioration behaviors of wooden parts in the Janggeongpanjeon built in 15 century were investigated according to the types of wood species, positions and parts of wooden column, and environmental conditions. It was found that a high differences of deterioration in the progressing levels of wood decay, according to the types of wood species, positions and parts of wooden column, and environmental conditions. The decay levels were high in the contacted areas with stone foundation which are about up to 8~40 cm above it, although it was shown the many of wooden parts of the round columns are still good condition. In the case of decay type, it was shown the brown-rot in many of the columns at outside of building which made of hardwoods. The decay in position of the columns was most serious in the directions of east-north, west-north and north. It was also indicated that the durability of Zelkova serrata was higher than other wood species of the round columns, while it was in inferior anti-insects.