• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.10-18
• /
• 2016

RC(Reinfored Concrete) structures exposed to carbonation in urban city have durability degradation with extended service life and cracks in concrete causes a local accelerated carbonation. In the present work, crack effect on carbonation depth is investigated and the service life of RC structure is evaluated considering cracks from early age and time-dependent cracks based on the previous field investigation. DFP(Durability Failure Probability), safety index, and the related service life are calculated considering the time to crack width reaches to maximum crack width(0.3mm). The results with time effect on crack width show lower DFP and longer service life, which seems to be reasonable compared with conservative results from crack effect from initial stage. Furthermore, crack effect is evaluated to be insignificant on DFP and service life. The technique with time-dependent crack effect on carbonation can be effectively used for RC structure containing cracking in use.

• Journal of the Korean Ceramic Society
• /
• v.37 no.9
• /
• pp.909-914
• /
• 2000

반응금속 침투법으로 제조한 $Al_2$O$_3$/Al 복합체의 파괴특성과 손상 내구성을 침투방향성에 따라 관찰하였으며, 복합체는 $Al_2$O$_3$단일상보다 향상된 파괴인성과 Al 단일상보다 높은 경도값을 나타내었다. Vickers 압입법을 사용한 복합체의 손상형태에서는 침투방향에 따른 각각의 미세구조에 의해 상이한 특성을 나타내었으며, 헤르찌안 압입법을 사용한 복합체의 손상거동은 $Al_2$O$_3$과 Al의 중간거동을 나타내었다. 헤르찌안 압입 후 강도저하시험으로 복합체가 갖는 우수한 결함저항성을 관찰할 수 있었으며, 높은 헤르찌안 하중에서는 복합체의 강도저하 특성이 복합체의 미세구조에 의존함을 관찰할 수 있었다. 이와 함께 복합체에서의 반응금속 침투방향성, 미세구조 그리고 손상 내구성 사이 상호연관성에 대해 논의하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2003.04a
• /
• pp.123-127
• /
• 2003

최근의 항균가공법을 대별하면 후가공법과 원사 개량법이 알려져 있으며 제품의 특성에 따라 선택되고 있다. 원사개량법은 항균 내구성을 확보할 수 있으나 합섬 원사 제조업체만 개발 가능한 방법으로 원사 구입의 어려움과 구입 단가가 높으며 섬유자체의 물성 및 염색성 등의 문제점이 있다. 한편 일반적인 가공법인 후가공법은 일반 제조업체에서 선호하는 가공법이나 항균효과의 내구성이 부족하며 사용수지 및 가공 환경상의 문제로 유리포르말린 및 중금속함량, 염색견뢰도 저하 등의 문제점을 가지고 있다. (중략)

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.173-180
• /
• 2013

This paper is to investigate an effect of waste cooking oil(WCO) on the engineering properties and durability of high volume admixture concrete. Fly ash with 30% and blast furnace slag with 60% were incorporated in OPC to fabricate high volume admixture concrete with 0.5 of W/B. Emulsified refining cooking oil(ERCO) was made by mixing WCO and emulsifying agent to improve fluidity. ERCO was replaced by cement from 0.25 to 1.0%. As results, the increase of ERCO resulted in decrease of slump and air contents. For compressive strength, the use of ERCO led to decrease the compressive strength at 28 days, while it had similar strength or much higher strength than plain concrete at 180 days. Resistance to carbonation and chloride penetration was improved with the increase of ERCO contents due to decreased pore distribution by saponification between ERCO and concrete, while freeze-thaw resistance was degraded due to air loss.

• International Journal of Highway Engineering
• /
• v.7 no.3 s.25
• /
• pp.53-62
• /
• 2005

Efficient snow-removing work is one of important processes of winter road management. Calcium chloride has been used as a typical deicing agent in Korea. It presents superial performance as snow deicing agents, however it has been known to give serious environmental problem and to deteriorate durability of concrete structure in road by corrosion. The environment-friendly road deicing agents made from the waste material which is liquid phase organic matter that is Ca Mg and reactant of organic acid (nitric acid and propionic acid) have been introduced by number of researchers. They indicated the calcium magnesium salt of organic acids have advantage over the calcium choride in terms of lower production unit cost by resources recycling and can solve environmental problem and durability deterioration of structures. In this study, the deicing performance of calcium magnesium salt of organic acids(CMO) is investigated based on the series of experiments including the test for heat of dissolution, freezing point, ice melting test and ice penetration test.

• Journal of the Korea Concrete Institute
• /
• v.15 no.4
• /
• pp.522-528
• /
• 2003

Concrete has been considered as a semi-permanent structural material, because its excellent durability. However, such high durable structure is often attacked by some environmental condition such as chloride diffusion, carbonation and so on. In order to prevent the deterioration behaviors of concrete structures. We estimated durability of concrete when used surface treatment system and coatings by new type inorganic coating materials. Base on the results of chloride ion's diffusion test, the coated cement mortar had smaller transmitted quantity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.296-302
• /
• 2019

In this study, a basic durability assessment was performed by selecting the main part of a trial product of a shale shaker, which is one of components for a mud circular system. For a preliminary durability assessment, it was assumed that the lifetime of the bearing for the vibrator motor and the stiffness of the support spring are affected by the vibration when the motor operates continuously. In the case of the motor, the initial p-p level was 0.72 g, but after 100 hours of operation, the p-p level was rapidly increased to 1.26 g. Bearing defects could be estimated through ball defect frequency analysis. In the case of the spring, the stiffness of the spring was reduced by approximately 3.78% at the end of 2,000 hours of the fatigue-durability test by applying excitation conditions to shale shaker body. In the future, we will analyze the influence of the particle removal efficiency of the shale shaker.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.888-893
• /
• 2003

The purpose of this study is to make clear the durability of the polymer films formed in the autoclaved polymer-modified mortars and concretes. The polymer films prepared with polymer dispersions such as a styrene-butadiene rubber (SBR) latex, a poly (ethylene-vinyl acetate)(EVA) emulsion and a polyacrylic ester (PAE) emulsion for polymeric admixtures are exposed to autoclaving at 18$0^{\circ}C$ in temperature and 1.01 MPa in vapor pressure, and subjected to tensile test and infrared spectroscopy. The durability of the polymer films is evaluated from the application of autoclaving to the polymer films under saturated Ca(OH)$_2$ solution immersion causes no degradation for SBR films and a significant degradation due to the saponification of the polymers for EVA and PAE films. Accordingly, in the application of autoclaving to polymer-modified mortars and concretes, it is suggested that SBR-modified mortars and concretes are hardly degraded but EVA- and PAE-modified mortars and concretes are markedly degraded by the saponification of the polymers.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.69-72
• /
• 2008

Bridge bearings are devices absorbing the displacements of the superstructure. Elastomeric bearings used generally as bridge bearings absorb the displacements of the superstructure using their rubber characteristics. Elastomeric bearings should make sure their shear fatigue performance not to impede the durability of bridge system. In this paper shear fatigue tests were performed and stiffness were measured through the shear fatigue tests. Tests results show the measured stiffness of elastomeric bearings have no specific tendency. This paper found that elastomeric bearings show bad shear performance or fail early if elastomeric bearings are manufactured with a doublefold elastomeric layer.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.320-328
• /
• 2007

The durability of marine concrete structures is severely degraded by corrosion due to seawater attack and diffusion of chloride in concrete. The deduction of durability causes high repair cost for maintenance of marine concrete structure. So, the applicability of high-durable materials is investigated to improve the durability in marine concrete structures. For these, the characteristics of corrosion prevention of marine concrete structures mixed with the mineral admixtures(SF, FA and BFS), the modified steel(stainless and coating steel), and corrosion inhibitors are evaluated using electro-chemical methods. As a results of this study, it is quantified for the effect of promotion of durability by high-durability materials in marine concrete structures.