• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.4
• /
• pp.464-469
• /
• 2006

This study was conducted to evaluate a knowledge on food components of muscle and adductor muscle of pearl oyster (Pinctada fucata martensii) as pearl processing byproducts. The concentrations of mercury and chromium as heavy metal were not detected in both pearl oyster muscle and adductor muscle, and those of cadmium and lead were 0.06 ppm and 0.11 ppm in only pearl oyster muscle, respectively. Thus, the heavy metal levels of pearl processing byproducts were below the reported safety limits. The volatile basic nitrogen (VBN) content and pH of pearl oyster muscle were 11.6 mg/100g and 6.31 and those of abductor muscle were 8.6 mg/100 g and 6.33, respectively. It was concluded that pearl oyster muscle and adductor muscle might not invoke health risk in using food resource. The contents of crude protein (16.5%) and total amino acid (15,691 mg/100 g) of adductor muscle were higher than those of muscle (11.2% and 10,131 mg/100 g) and oyster (12.1% and 11,213 mg/100 g) as a control. The contents of calcium and phosphorus were 95.4 mg/100 g and 116.0 mg/100 g in muscle, 75.2 mg/100g and 148.1 mg/100 g in adductor muscle, respectively. The calcium level based on phosphorus was a good ratio for absorbing calcium. The free amino acid contents and taste values were 635.5 mg/100 g and 40.2 in muscle, and 734.9 mg/100 g and 24.1 in adductor muscle, respectively, but that (882.8 mg/100 g and 40.2) of oyster was higher than those of pearl processing byproducts. Based on the results of physicochemical and nutritional properties, pearl oyster muscle and adductor muscle can be utilized as a food resource.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.239-246
• /
• 2008

Yeongweol sericite deposit of Gangwon Province is regarded as one of the sericite deposits derived from granitic rocks due to post-magmatic alkali metasomatism, and the other sericite deposit of the same origin is the Daehyun mine of Gyungbug Province. Sericite ores were originated from leucocratic granitic stocks of Cambrian-Triassic age which intruded the pegmatitic migmatite of the unknown age and granite of the Pre-cambrian age, respectivcly. Jangsan quartzite of the lowermost formations of the Paleozoic era, which played as the capping rock protected from the leakage of the hydrothermal solution. It is well known that those sericite deposits arc formed during formation of the geosyncline, and they are also situated in the margins of the Hambaeg Syncline. Leucocratic granites commonly contain pegmatites with tourmaline crystals, and are rich in potassium feldspars, and sodium plagioclase as well. Sericitized ores are mainly found as we go up to the higher elevations or to the margins of the stocks. And some of the Highest grade sericite ores show the monominerallic character composed of nearly pure sericite probably doc to the ultra greisenization. Chemical analysis shows higher $Na_{2}O$ and $K_{2}O$ contents $(2.00\sim7.03wt%)$ as the sericitizations arc preceded and they represent obvious greisenization. But low CaO contents $(0.05\sim4.51wt%)$ indicate that albitizations are so weak. Pyrophyllite of the Youngweol area is often accompanied by the sericite, indicating rather stronger thermal effect than the Daehyun mine. It is known that there are several Sn deposits originated from greisenization in the Taebaegsan region. And greisens are inclined to contain W, Mo and several REE's such as Be, Nb and Li, and so Taebaegsan region interbedded with lots of carbonate formations are still worthwhile to survey for those metallic deposits.

• Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.240-245
• /
• 1999

The starches were isolated from normal (Mudeung) and waxy (Chalssal) hull-less barleys which contained similar contents of ${\beta}-glucan$ and amylose. Their water binding capacity, swelling power and solubility were analyzed. Scanning electron microscopy showed most starch granules had predominant lense shape granules. The particle size of starch granules was in the range of $0.1{\sim}30\;{\mu}m$. The higher pasting temperature was found for $Mudeung(84^{\circ}C)$ than for $Chalssal(61.5^{\circ}C)$. However, Mudeung barley had a lower peak viscosity(535 BU) than that of Chalssal(1,510 BU). Differential scanning calorymetry analysis showed that To and Tp for two starches were 57.0, $60.6^{\circ}C$ for Mudeung, and were 57.0 and $62.2^{\circ}C$ for Chalssal, respectively. Enthalpy changes were 7.9 and 13.2 J/g for Mudeung and Chalssal, respectively.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.7-12
• /
• 1999

The cation-exchange adsorbent (CEA) was prepared by radiation-induced grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) fabric and its subsequently phosphonation. The adsorption characteristics of $Pb^{2+}$, $Cu^{2+}$ and $Co^{2+}$ for the CEA were discussed. In the grafting of GMA onto PP fabric, the degree of grafting (%) increased with increasing reaction time, reaction temperature, and pre-irradiation dose. The maximum grafting yield was observed around 60% GMA concentration. The content of phosphoric acid ranges from 2.5 to 3.5 mmol/g with the 85% phosphoric acid. The adsorption of $Pb^{2+}$, $Cu^{2+}$ and $Co^{2+}$ by the CEA was enhanced with increasing phosphoric acid content. The order of adsorption capacity of CEA was $Pb^{2+}$>$Co^{2+}$>$Cu^{2+}$.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1072-1080
• /
• 2005

The extraction characteristics of heavy metals(HM) from a contaminated soil at existing lead smelters were investigated with ethylene diamine tetraacetic acid(EDTA), citrate and HCl as washing solutions. EDTA was more effective for Pb than for other heavy metals. As the mol ratio of EDTA/HM increased, the removal efficiency of heavy metals became higher. When the mol ratio of EDTA/HM approached to 6.5, it removed Pb most effectively. Citrate was effective especially in extracting Zn. The removal efficiency of HCl was comparatively high in almost all heavy metals, and at 0.3N concentration it was the highest. After soil washing process by the use of EDTA, the great part of exchangeable fractions and most of heavy metals of weakly adsorbed like carbonate fraction were extracted. For washing with citrate and HCl, four heavy metals showed the similar exchange of chemical partitioning and the exchangeable fractions of Pb which has weakly adsorbed to soil were more increased than before the process. As removal efficiency of citrate washing process depends upon the distribution of non-detrital fractions, so it can be contended that only the amount of non-detrital fractions could be removed from all the heavy metal content. EDTA and HCl could remove most of non-residual fractions in all heavy metals except Zn. As a result of EDTA washing, toxicity characteristic leaching procedure(TCLP) concentration of the processed soil met the USEPA Pb limit of 5.0 mg/L.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.327-331
• /
• 2010

Porcine placenta was treated with alkali, acid and enzyme treatment to obtain extracts. Heavy metal contents such as Pb, As, and Hg were low enough to satisfy cosmetic agent standard. As a result of safety test(MTT assay), porcine placenta extracts showed over 80% of cell viability at $50{\mu}g/ml$, and cell toxicity was relatively lower. From antioxidation test using DPPH free radical scavenging assay, antioxidation effect was highest as 63% at $50{\mu}g/ml$ when porcine placenta was treated with alkali in pH 9. From whitening effect test using tyrosinase inhibition assay, tyrosinase inhibition effect was 30% at $50{\mu}g/ml$ concentration in alkali treated procine placenta, however, the efficiency was lower compared with arbutin or vitamin C. In anti-wrinkle effect test from elastase inhibition assay, elastase inhibition effects were 20~30% at $50{\mu}g/ml$ for 5 kinds of porcine placenta treatments, which was superior to standard, and especially, protease treated extracts showed best results. Skin formulation including 1% porcine placenta was made and the formulation was very stable for temperature and storage period. From this research, porcine placenta extract showed high potential for anti-wrinkle functional cosmetic agent.

• Journal of the Korean Chemical Society
• /
• v.41 no.7
• /
• pp.337-342
• /
• 1997

Acryloylmethylbenzo-15-crown-5 was prepared from the reaction of 4'-hydroxymethylbenzo-15-crown-5 with acryloyl chloride. And, poly(acryloylmethylbenzo-15-crown-5) [poly(AMB15C5)] was synthesized by radical polymerization using AIBN as initiator in benzene. Coated wire lead(II) ion-selective electrodes ($Pb^{2+}$-CWISEs) using either poly(AMB15C5) or B15C5 as neutral carrier were prepared, respectively. $Pb^{2+}$-CWISEs gave linear responses with slopes of 28$\pm$ 1mV per decade within the concentration range of $10^{-5} M{\sim}10^{-1}$ M, respectively. Also, the detection limits were $10^{-6}$ M and response times were either 3 or 5 min. for B15C5 and poly(AMB15C5), respectively. $Pb^{2+}$-CWISE base on B15C5 was rather unstable than poly(AMB15C5)'s due to solubility of the B15C5 in water. The selectivity coefficients of a variety of interfering ions such as $Mg^{2+},\; Ca^{2+},\; Co^{2+},\; Ni^{2+},\; Cu^{2+},\; Zn^{2+}$ and $Cd^{2+}$ were small ($10^{-4}{\sim}10^{-5}$), while those of $Na^+$ and $K^+$ were large (0.1∼0.01). In addition, the electrode responses depended upon the pH of test solution and the composition of the membrane. In the range pH 3∼6 of test solution, potentials of Pb2+-CWISEs were hardly changed. The optimal contents of B15C5 and poly(AMB15C5) were 7.7 wt% and 13.1 wt%, respectively.

• Clean Technology
• /
• v.23 no.4
• /
• pp.364-377
• /
• 2017

In this study, to improve the low surface area of domestic anthracite as raw materials of activated carbon, characteristics on chemical activation and VOCs adsorption of activated carbon according to mixing ratio of anthracite and lignite. For these, properties of raw materials, parameter characteristics of preparation processes for activated carbon, and VOCs adsorption characteristic of the prepared activated carbon are analyzed. The experimental results showed that, the domestic anthracite had disadvantages of high contents for ash and lead, arsenic, which were exceeded for the heavy metal limits, in the properties of raw materials. To improve these diadvantages, using the mixing ratio of anthracite and lignite, and the optimum conditions for pretreatment, activation, washing, and pellitization process, the activated carbon had a range of BET (Brunauer-Emmett-Teller) surface area of $1,154{\sim}1,420m^2g^{-1}$ with mesopore development and hydrophobic surface property. The carbons were satisfied with the quality standard for granular activated carbon, and had similar physicochemical properties with the commercial activated carbon. The minimum mixing condition for commercial VOCs activated carbon performance must have the caloric value of above $5,640kcal\;kg^{-1}$, and the carbon had higher adsorption capacity with order of xylene > toluene > benzene according to more higher molcular weight and hydrophobic property.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.107-111
• /
• 2005

We investigated the quality of vaporized liquid of water-boiled pine needle in the aspects of drinking conformity and aroma characteristics. As a result, there was no hazardous component in the assessment for 45 types of ingredients. Especially, inorganic components such as arsenic (As), lead (Pb), mercury (Hg), and cadmium (Cd) which are harmful to human body were not detected. Additionally, we observed that other ingredients were present within the standard level suitable for drinking. The total 34 volatile components of the vaporized liquid of water-boiled pine needle were identified by dynamic head-space method. Fenchol, bomeol $\beta-fenchyl$ alcohol and bomyl acetate were the major volatiles and composed of 6.7, 13.1, 26.6 and $16.2\%$ of total volatiles, respectively. In addition, the alcohols and aldehydes were the prominent ingredients of which the contents showed comparatively high.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.2
• /
• pp.41-51
• /
• 2004

Recycled plastic containers, so-called 'Tarai' in Korea which are often used as food containers, were collected from 23 domestic manufacturers. Then, their components were analyzed to find out whether they are safe for the use of food-contact material, to meet the standards and specifications of Korean hygienic regulations, the 'Food Code.' The components of the material were analyzed by using Fourier Transform-Infrared (FT-IR), Differential Scanning Calorimeter (DSC), and Elementary Analyzer (EA). The analysis of the FT-IR and the DSC showed that the main component of the samples was polyethylene. Furthermore, the analysis of the EA for 'Tarai' sample revealed the same ratio of C and H elements as in the case of polyethylene which was 1 to 2. Phenol and formaldehyde were not detected in all the samples. As for the antioxidant tests, Irganox 1010, Irganox 1076 and Irganox 1330 were detected in various samples. With regard to the material test for heavy metals, 7 out of 23 samples exceeded the limit value of 100 mg/kg in lead contents. No standard and specification is yet prescribed in the 'Food Code' for the material of 'Tarai' as plastic containers for food. This study suggests that the use of 'Tarai' as a food container should be strictly controlled.