• Journal of Environmental Science International
• /
• v.7 no.1
• /
• pp.57-61
• /
• 1998

The biosorption of heavy metals has received a lot of attraction for application of metal ions treatment. In this work, we studied with Arthrobactor sp., screening from a wastewater containing heavy metals. The Pb uptake capacity of Arthrobactor sp. was nearly 146.9 mg Pb/g dry biomass(initial concentration, 500 may L), whereas the Pb uptake capacity of Sacchuomyces cerevisiae and Sacchuomyces uvuum were only around 39.40 and 35.65 mg Pb yg dry biomass, respectively. The Pb and Cr were removed from metal solution much more effeciently than were the other metals(Cd and Cu). The Pb uptake capacity of Aythrobactor sp. increased with increasing in pH(1.8, 3.0 and 4.0) and decreased with Increaslng of biomass concentration. At pH 4.0, the Pb uptake capacity reached 244 mg Pb/g dry biomass in Pb initial concentration of 1000 mg/L. The Pb uptake capacity of Ayhol)actor sp. treated by KOH and $CaCl_2$ were increased above values obtained with untreated Ayurobactor sp. However, the Pb uptake capacity fore the breakthrough points were reached.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.877-883
• /
• 2006

An alternative method to remove and recover heavy metals is biosorption based on metal-sequestering properties of natural or biological origin. In this study, the effects of factors such as temperature, pH, initial concentration of lead, and initial amount of biomass on biosorption of lead using Aureobasdium pullulans were investigated. A. pullulans has an excellent selectivity to remove lead than other heavy metals such as cadmium, chromium, nickel in pure and mixed solution. The optimum temperature of biosorption with A. pullulans was $40^{\circ}C$ and the amount of removal increased at high pH. The higher initial lead concentration or the lower cell dry weight, the higher amount of lead was adsorbed. The adsorption isotherm of lead was accorded with Freundlich model. The adsorption capacity and initial adsorption rate of living A. pullulans were about twice higher than that of dead one.

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.245-251
• /
• 2020

Lead (Pb) has been shown to be a useful tracer of contamination sources and geochemical processes such as age dating and crustal evolution. These studies require a chromatographic technique for Pb separation from geological samples. This paper presents a comparison study on the effect of eluent concentration between 6M HCl and 8M HCl on the separation of Pb from Pb resin. The results showed that the separation of Pb using 6M HCl as the eluent was not effective compared to the separation using 8M HCl. To verify this method, we measured the Pb isotopic compositions of the Pb isotopic standard (NIST NBS981) and geological reference materials (BCR-2, GSP-2, and JG-1a) using a thermal ionization mass spectrometer (TIMS). The results correspond well with the reported values within the error range, implying that this method can be useful.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.361-372
• /
• 2015

The experiment attempts to find out the effect of the mixture of the antimicrobial agent and insecticide on metallic material including Silver(99.9%), Copper(99.9%), Lead(99.9%) and Iron(99.5%) by Oddy test. The mixtures of the antimicrobial agent and insecticide were prepared in 60ml; with the standard concentration of 17.5% in B77 Essential oil mixture, one for mixture of concentration of ${\pm}1{\sim}2%$ and insect repellent material; the other for mixture of low concentration and antimicrobial agent(BS-2 and BS-3) material. After Oddy test, we investigated the variation in the surface of the samples by visual inspection, weighing, color measurement and SEM-EDS analysis. The result showed that Lead had the biggest change in the surface, and Copper had the biggest change in the color. In addition, changes in the samples before and after the experiment were found to be greatest at concentration of 19% of Essential oil mixture of the antimicrobial agent and insecticide. Also, B78 Essential oil mixture produce change in samples. It means when the concentration of oil mixture rises, the variation of the samples gets bigger. And, the low concentration of mixture including B77 Essential oil mixture and B78 Essential oil mixture also produce big change in the samples. However, the low concentration of B77 Essential oil mixture that do not contain B78 Essential oil mixture was able to confirm that the change of the surface is not large.

• Corrosion Science and Technology
• /
• v.11 no.3
• /
• pp.96-102
• /
• 2012

Outer diameter stress corrosion cracking (ODSCC) has occurred for Alloy 600 (Ni 75 wt%, Cr 15 wt%, Fe 10 wt%) as a heat exchanger tube of the steam generator (SG) in nuclear power plants (NPP) during long term operation. Among many causes for SCC, lead (Pb) is known to be one of the most deleterious species in the secondary system. In the present work, the oxide formed on Alloy 600 was characterized as a function of the PbO content in 0.1 M NaOH at $315^{\circ}C$ by using an electrochemical impedance spectroscopy (EIS), a transmission electron microscopy (TEM), equipped with an energy dispersive x-ray spectroscopy (EDS). The oxide property was analyzed in view of SCC susceptibility.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.4
• /
• pp.1-7
• /
• 2004

To choose a organic acid and in-organic acid composite which is the most effective in soil-flushing process cleaning lead-contaminated sites, lead removal rates were investigated in the experiments with some organic acids; 0.01M of EDTA showed the highest lead-extraction rate ($69.4\%$) compared to the other organic acids. Furthermore, the lead removal rates were measured with 0.01M of EDIA and 0.1M of in-organic acid ; a EDTA and boric acid composite showed the highest lead-extraction rate ($68.8\%$) at pH5 compared to the other composites. As the concentration of boric acid was increased from 0.1M to 0.4M in a 0.01M of EDTA and boric acid composite, lead removal rate was decreased from $68\%\;to\;45\%$. But as the concentration of EDTA was increased from 0.01M to 0.04M in a EDTA and 0.1M of boric acid composite, permeability was decreased from $6.98{\times}10^{-4}cm/sec$ (0.01M of EDTA) to $5.99{\times}10^{-4}cm/sec$ (0.04M of EDTA). However, permeability was increased from $4.41{\times}10^{-4}cm/sec$ (0.03M of EDTA) to $6.26{\times}10^{-4}cm/sec$ (0.03M of EDTA and 0.1M of boric acid composite). indicating EDTA could increase lead dissolution/extraction rate and decrease permeability. In this system, lead remediation rate is the function of lead dissolution rate from soils and permeability of the composite into soils, and the optimized [EDTA]/[Boric acid] ratio is [0.01M]/[0.1M].

• Journal of Korean Society for Atmospheric Environment
• /
• v.4 no.1
• /
• pp.71-75
• /
• 1988

대기오염이 인체에 미치는 영향을 연구하기 위하여 오염의 농도가 지극히 심할 것으로 예측되는 고속도로 서울톨게이트에 근무하는 근로자 37명과 사무직 15명을 대상으로 혈액 및 요중 납함량과 요중 코프로포르피린을 정량하고 임파구 중 자매염색분체 교환빈도를 계산하여 인적특성에 따라 비교 검토하였다. 한편 대기오염의 정도를 파악하고자 1986년 4월부터 약 3개월에 걸쳐 아황산가스, 이산화질소, 일산화탄소, 부유분진, 납, 벤조파이렌 등 인체에 유해한 오염물질들을 톨게이트 근무자가 근무하는 위치의 공기 중에서 정량하였다. 이들 성적을 비교 검토한 바 다음과 같은 결론을 얻었다. 1. 톨게이트 내의 공기 중 이산화질소, 일산화탄소, 부유분진, 벤조파이렌, 납량 등이 서울시내 일반 대기보다 월등히 높았다. 2. 톨게이트 근로자의 혈중 납량, 요중 납 및 포프로포르린량, 그리고 임파구 내의 자매염색분체 교환빈도의 평균치가 사무직근로자보다 유의하고 높았다.

• Clean Technology
• /
• v.18 no.4
• /
• pp.390-397
• /
• 2012

Removal characteristics of lead-contaminated soil at the military shooting range located in the Changwon city were studied experimentally using soil washing process. As a washing solution, hydrogen chloride (HCl) concentrations of 0.001, 0.01, 0.1 and 0.2 N were used, and soil : solution ratios were 1 : 2, 1 : 3, 1 : 4, and 1 : 5. Particle diameter of contaminated soil of 4-0.075 mm, and washing period of 5, 10, 15, 20, 30, 60, and 120 min were used as operating parameters. The optimum concentration of HCl solution was 0.1 N (56.3% of Pb removal efficiency) with 15 minutes operation period in views of economics, and the optimum soil : solution ratio was determined as 1 g : 3 mL for 69.7% of Pb removal efficiency with 0.1 N HCl and 15 minutes washing period. As washing period increased, removal efficiency was increased until 20 min of the removal efficiency of 75.3%, and then almost stable. Pb removal efficiency in soil particle diameters of 0.075 mm or more was ranged from 77.0% to 82.0%, but it was decreased to 52.8% in diameter of less than 0.075 mm. Therefore, the optimum cut-off size of the soil particle diameter was found less than 0.075 mm. Combined HCl solution and ultrasonic washing method showed better removal efficiency compared to only water or HCl washing method for particle sizes above 0.075 mm.

• Korean Journal of Microbiology
• /
• v.38 no.1
• /
• pp.26-30
• /
• 2002

A ubiquitous bacterium,Effects of Lead, Copper and Cadmium on Pseudomonas cepacia KH410 Isolated from Freshwater Plant Root was isolated from freshwater plant root and interactions of lead, copper and cadmium with this strain was studied. Mass production of dry cell weight 2.72 g-DCW/ι-medium was obtained by cultivation in a nutrient medium containing 1% yeast extract, 1% soytone and 0.5% NaCl, pH 7.0, at temperature of 28℃ for 24 hrs under aeration. The mass of dry cell produced after exposure with 100 mg/ι of heavy metal was 1.98 g/ι for lead, 1.58 g/ι for copper and 0.20 g/ι for cadmium, respectively. The minimal inhibitory concentrations (MIC) for each heavy metal was 1.3 mM for lead,0.8 mM for copper and 0.4 mM fur cadmium, respectively. Cell aggregation occurred by each heavy metal exposure was observed from 1 day to 4 days by an optical microscope. Entrapment, precipitation effects on cell by heavy metals between 10 min and two hours were examined by an electron microscopy. Cadmium appeared to be the most toxic on cells and the order of toxicity was cadmium>copper>lead.

• Journal of Food Hygiene and Safety
• /
• v.35 no.4
• /
• pp.354-364
• /
• 2020

For this paper we analyzed heavy metals including lead, cadmium, arsenic and mercury, and conducted risk assessment on 171 types of herbal medicines used as foods and drugs distributed in Seoul's Yangnyeongsi and Kyungdong (Gyeongdong) herbal medicine markets. The concentrations of the heavy metals were measured by the ICP-MS and a mercury analyzer. The detection ranges of the lead, cadmium, arsenic and mercury were found to be ND-4.719 mg/kg, ND-1.019 mg/kg, 0.002-8.696 mg/kg and ND-0.058 mg/kg, respectively. Artemisiae Capillaris Herba exceeded the standards of the MFDS (Ministry of Food and Drug Safety) for cadmium items, and Actinidiae Ramulus et Fulium et Fructus Vermicultus exceeded the standards for arsenic items. The non-carcinogenic risk assessment showed that there were no items exceeding 1 and that they were safe. The risk of carcinogenicity to lead was below 10^-6 in all items and was evaluated as safe. The risk of carcinogenicity of arsenic was almost all in the range of 10^-4 to 10^-6. All %PTWI are considered to be safe below 100.