• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.242-242
• /
• 2021

지구온난화에 의해 야기된 기후변화로 인하여 최근 국지성 집중호우의 발생 빈도와 강도가 증가하고 있는 추세이며, 또한 기온, 강수량 등의 변화로 농경지 재배작물과 시설재배와 같은 재배방법의 변화 등 농경지의 재배환경이 빠르게 변화하고 있다. 이러한 극한기상의 발생 빈도 및 강도의 증가와 농경지 재배환경의 변화는 홍수로 인한 하천수 범람, 지하수위 상승, 배수불량, 도달시간의 감소 등 저지대 재배지 및 농경지에서의 침수 위험을 증가 시키는 원인이다. 이로 인해, 매년 농경지 침수로 인하여 많은 농가들이 피해를 겪고 있으며 피해 규모와 빈도 또한 증가하고 있는 추세를 보이고 있다. 따라서 농경지 침수 피해 저감을 위하여 다양한 관계기관과 연구자들이 배수개선사업 및 침수 예측 및 피해 저감을 위한 연구를 수행하고 있다. 본 연구에서는 기후변화 및 재배환경의 변화가 농경지 침수에 미치는 영향을 분석하기 위하여 기상청 종관기상관측장비(ASOS) 및 방재기상관측장비(AWS)의 지점 강수량 자료를 수집하고 기후변화의 변동 특성을 분석하였다. 또한 과거 농경지 재배 현황 및 침수 피해 발생 자료를 수집하여 농경지 재배환경의 변화와 농경지 침수 피해를 분석하였다. 본 연구에서 수행된 기후변화 및 농경지 재배환경 변화 등 복합적인 요인에 의해 발생하는 농경지 침수 피해에 대한 분석을 통하여 추후 기후변화 및 재배환경 변화를 고려한 배수시설물의 효율적인 운영을 위한 기초자료로 활용될 수 있을 것으로 사료된다.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.367-379
• /
• 2019

Pyeongan Supergroup (PS) in the Taebaeksan basin preserves key geological evidences to understand the tectonometamorphic evolution of the Songrim orogeny that affected the formation of the Korean Peninsula during the late Paleozoic to early Mesozoic. The aims of this paper therefore are to investigate the characteristics of the Songrim orogeny based on the previous results of metamorphism and deformations of the PS, and then to review geological significance and research necessity of the PS. Age distributions and Th/U ratio of detrital zircon in the PS indicate that sedimentary environment of the Taebaeksan basin during the late Paleozoic was arc-related foreland basin and retro-arc foreland basin at the active continental margin. In addition, the main magmatic activities occurred in the early Pennsylvanian and Middle Permian, thus sedimentation and magmatic activities occurred simultaneously. The PS was affected by lower temperature-medium pressure (M1) and medium temperature and pressure (M2) regional metamorphism during the Songrim orogeny. During M1, slate and phyllite containing chloritoid, andalusite, kyanite porphyroblasts intensively deformed by E-W bulk crustal shortening combined with folding and shearing. And garnet and staurolite porphyroblasts were formed during the N-S bulk crustal shortening accompained by M2. Such regional metamorphism of the PS is interpreted to occur in an area where high strain zone is localized during ca. 220-270 Ma. In order to elucidate the evolution of the Taebaeksan basin and tectonic features of the Songrim orogeny, it is expected that the study will be carried out such as the regional distribution of metamorphic zones developed in the PS, characteristics and timing of deformations, and late Paleozoic paleo-geography of the Taebaeksan basin.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.4
• /
• pp.211-237
• /
• 2000

Major element zoning has been analyzed in garnet porphroblasts obtained from the Grt-St and Ky-Grt-St grade assemblages in Zones I on the northern flank of the Pelham Dome, north central Massachusetts. These porphyroblasts grew during multiple phases of deformation and meta-morphism revealed by the inclusion trail geometry plus the chemical zoning patterns within garnet porphyroblasts. Unusual zoning patterns, including zoning reversals and gradient changes in XMn, zlgzag patterns in Fe/(Fe +Mg) and staircase-shaped patterns in XCa, are coincident with textural truncations and other changes in microstructure within the garnet porphrublasts. Chemical variations in plagioclase, biotite, muscovite and staurolite combined with inclusion trail geometry and petrography reveal that the garnet zoning patterns are modified by combinations of the following. (1) Uni-and divariant reactions involving garnet consumption(Grt+ Chl+Ms=St+Bt+Qtz + $H_2$O) and production(St+Ms + Qtz= Bt+ Grt +A1$_2$$SiO_{5}$ + $H_2$O). (2) Deformation induced episudic ionit dissolution, preferential diffusion and re-distribution during foliation development. (3) P-T changes during growth of the porphyroblasts. The P-T paths combined with petrographic and inclusion trail morphology observations consist of two pattens; (1) heating/compression during NW-SE shortening; and (2) decompression with cooling during NNW-SSE shortening. Based on temperature-time(T-t) geochronological data and late-Paleozoic tectonic model, Alleghanian metamorphism, which is the result of heterogeneous shearing concentrated along the boundary between the Abalone Terrane(Pelham dome) and cover rocks(Bronson Hill Terrane), has produced Ky-St-Ms mineral assemblage during Pennsylvanian(290-300 Ma) in Shutesbury area. However, temperature of alleghanian metamorphism was not high enough to form garnet and staurolite in the Northfiled syncline area. Alleghanian metamorphism has affected only the matrix due to heterogeneous shearing in the study area.

• The Journal of Society for e-Business Studies
• /
• v.8 no.3
• /
• pp.87-105
• /
• 2003

Business Process Management (BPM) is an emerging trend of managing business process life cycles and integrating heterogeneous systems . Recently, BPM is considered as an essential element for automation of complex business processes involving many companies, particularly for those in an e-Business environment. In such an environment, it is very important for each business partner to trace history of resources. However, it has been a difficult problem for Workflow Management Systems(WFMSs) to support management of resource changes because of limited storage, complex process structure, and absence of formal change model. In this paper. a new framework is proposed, which can support change management for documents, one of core resources of business process. Under a traditional WFMSs framework, all workflow components belong to either build-time or run-time function, and executions of workflow processes are performed by the two functions . To manage changes of documents while process executing. a new framework with additional component modules are required. A version control method is introduced for the purpose of managing document changes. The proposed method includes five models for document structure, process structure, association between process and document, version management, and efficient version storage. A prototype system is developed to demonstrate the effectiveness of the proposed models.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.4 s.4
• /
• pp.74-81
• /
• 2000

The duration of construction in the construction works contains non-working days as well as working days. The duration is so relevant to climate that it should be calculated after fully considered about the regional climate in which construction processes. In most construction fields, however, there has been a frequent adjustment of duration because the field supervisor's experiences have decided non-working days indiscriminately without any accurate information about weather. Not only has that done great economic damages, but also caused many problems in interests among construction subject. So, in this study, we will analyse the elements of climate which has influences on the duration and implement the hypothetical weather simulation. By connecting the results of simulation with the duration of construction, we will propose the decision-making support model for the efficient calculation of duration when the field supervisor makes the projects schedule.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.153-164
• /
• 1997

Flame oscillation phenomena in a co-flow diffusion flame was experimentally studied with periodic fuel supply using a solenoid valve. The degree of excitation was controlled by changing the volume flux of fuel passing through the valve. Flame oscillation frequencies were measured utilizing a photodiode, a spectrum analyzer, video and high speed movies. Laser planar visualization was employed to study the correlation between the flame oscillation and the toroidal vortices. Observed are three regimes of flame oscillation, where the oscillation frequencies are for the multiples of excitation, the excitation itself and the flame natural oscillation. Both periods of natural oscillation and of excitation induced oscillation exist over one cycle of the excitation in the frequency multiplied regime. It is considered as an effect of balancing the influence of buoyancy driven vortex with that of excitation induced vortex near the excitation rate of 0.2. Flame shapes are become monotonous as increasing the excitation frequency to the range of over two fold of the natural oscillation. The flame oscillation can be modulated to the frequency of either multiples of excitation or excitation itself under certain conditions. This implies that the flame oscillation could be modulated to avoid the resonance frequency of the combustor, and shows the possibility of active control of the flame oscillation.

• Journal of Korean Physical Therapy Science
• /
• v.8 no.2
• /
• pp.961-965
• /
• 2001

The aim of this study is to present the basic reference data of age and specipic gait parameters for Korean Adult. The basic gait parameters were extracted from 20 Adult, 10 men and 10 women, 21 to 24 years of age using VICON 512 Motion Analyzer. The temporal gait parameters and kinematic parameters of Korean Adult similar to other western reference data. The results were as follows: 1) The mean Cadence of the male to the female were 113.5 steps/min to 117.6 steps/min. 2) The mean Walking Speed of the male to the female were 1.30 m/s, to 1.27 m/s. 3) The mean Stride Length of the male to the female were 1.35 m, to 1.30 m. 4) The mean maximal angles of pint on the pelvic tilt motion for different male to the female were $9.80^{\circ}$ to $7.75^{\circ}$. (p<0.05) 5) The mean maximal angles of pint on the hip flexion motion for different male to the female were $22.62^{\circ}$ to $27.65^{\circ}$. (p<0.05) 6) The mean maximal angles of pint on the knee flexion motion for different male to the female were $55.78^{\circ}$ to $55.49^{\circ}$. (p>0.05) 7) The mean maximal angles of pint on the ankle dorsiflexion motion for different male to the female were $12.47^{\circ}$ to $13.39^{\circ}$. (p>0.05).

• The Journal of Society for e-Business Studies
• /
• v.11 no.1
• /
• pp.69-89
• /
• 2006

Due to the technological developments and industrial changes , studying for the future has been attached great importance. According to the forthcoming ubiquitous computing environment or smart environment, it is necessary for a country and an enterprise to forecast the future or foresight the future technologies . Although many countries have been doing the foresight, it is difficult for the enterprise to try future foresight activity, because the foresight activity needs lots of the costs and time for good results. Also, almost methodologies used in foresight are suitable for country level foresight projects. In this research, a methodology is developed for an enterprise to use easily, and a case based on the proposed methodology is presented. The proposed foresight methodology is developed based on the traditional forecasting methods, FAR, Future Wheel, and Scenario. Especially, the methodology focused on the customers of a company.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.20-26
• /
• 2012

The objective of this study is to assess plastic deformation in aluminium alloy by acoustic nonlinearity of laser-generated surface waves. A line-arrayed laser beam made by high-power pulsed laser and mask slits is utilized to generate the narrowband surface wave and the frequency characteristics of laser-generated surface waves are controlled by varying the slit opening width and slit interval of mask slits. Various degrees of tensile deformation were induced by interrupting the tensile tests so as to obtain aluminum specimens with different degrees of plastic deformation. The experimental results show that the acoustic nonlinear parameter of a laser-generated surface wave increased with the level of tensile deformation and it has a good correlation with the results of micro-Vickers hardness test and electron backscatter diffraction (EBSD) test. Consequently, acoustic nonlinearity of laser-generated surface wave could be potential to characterize plastic deformation of aluminum alloy.

• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.359-365
• /
• 2013

The aim of this study was to produce enzymatic hydrolysis of ${\alpha}$-LA, ${\beta}$-LG and BSA with alcalase for the possible application of hypoallergenic foods toward cow's milk allergenic infant. The molecular weights of most of the peptides in hydrolysates from ${\alpha}$-LA, ${\beta}$-LG and BSA by alcalase were below 3,000 dalton. Antigenesity of ${\alpha}$-LA, ${\beta}$-LG and BSA hydrolysates to rabbit anti-${\alpha}$-LA antiserum, ${\beta}$-LG antiserum and BSA antiserum were remarkably decreased by more than $10^{-3}$ at 20% inhibitionrate. Antigenesity of polyvalent antigenic peptide in ${\alpha}$-LA, ${\beta}$-LG and BSA hydrolysates to specific rabbit anti-${\alpha}$-LA antiserum, ${\beta}$-LG antiserum and BSA antiserum was determined by PCS test using guina-pig. Hydrolysates of ${\alpha}$-LA, ${\beta}$-LG and BSA with less than 3,000 dalton did not show polyvalent antigenic reaction against rabbit antiserum. Hydrolysates of ${\alpha}$-LA, ${\beta}$-LG and BSA could be a source for the manufacturing of hypoallergenic food.