• The Korean Journal of Ecology
• /
• v.21 no.5_3
• /
• pp.703-712
• /
• 1998

Physicochemical factors, microbial population size and the properties of the bacterial isolates were estimated to find out the nature of soil ecosystem of Mt. Nam. Samples were obtained from the surface layer of soils on which specific plant community is developed. Average content of moisture and organic matter of the soils were 21.6% and 17.3%, respectively. These values were similar to those of developing forest soils, but were slightly lower than those of climax ecosystem such as Piagol in Mt. Chiri. Chiri. Content of phosphate was higher than those of other forest soils. The population size of soil bacteria ranged from 27.4 to 195.8 ${\times}\;10^5$ CFU/g. duy soil, and the size is somewhat dependent on the moisture and oranic matter content of soils. A large number of bacteria were able to decompose macromolecules such as starch, elastin and gelatin. Bacterial species composition of each soil was comparatively simple. Pseudomonas, Agrobacterium, Flavobacterium and Xanthomonas which are Gram-negative short rods were widely distributed in the forest soils. The endospore forming Bacillus species were also the main constituents of the soil microflroa. Actinomycetes were widely distributed in the forest soils, but the distribution pattern varied in each site. Most of the actinomycetes were also able to decompose organic macromolecules. The rate of resistant actinomycete strains to antibiotics and heavy metals were lower than those from cultivated soils, but higher than those from well-preserved forest soils. Antibiosis pattern of the actinomycete isolates was similiar to the resistance pattern. This means the forest soils of Mt. nam was somewhat interferred by artificial behabiour.

• The Korean Journal of Ecology
• /
• v.21 no.5_3
• /
• pp.589-602
• /
• 1998

Mt. Nam (265m), a city park of Seoul, was originally covered with a typical deciduous broad-leaved forests in Central Korea. However, the park forests have been changed the development for various purpose such as the construction of castle wall, road way, broadcasting station, theater, hotel and apartments, in addition, to thoughtless plantation or alien plant introduction. Human population growth from ca. 100 thousands persons less in that time established Seoul as the capital of choseon dynasty in 1394 to ten millions over persons at present, accelerated the vegetational changes of the park. mt. Nam boundary in those days of sunjong (1908) also was much shrinked as much the range of 300 m distance in the northern most to 700 or 800m distance in some places. The actual vegetation of Mt. Nam largely can be classified by floristic composition into two plant communities of Quercus mongolica community and Pinus densiflora community, four plantations of Pinus rigida, Robinia pseudo-acacia, Populus tomentiglandulosa and other tree species, and on mixed forest with native and alien tree species in secondary succession stage (Yim et al. 1987). The restoration movement of Mt. Nam toward to the natural condition of forest or biodiversity is moving now. However, in the movement there are some problems such as the lack of ecological consideration and the undesirable decision of priority in the practice. A warning should be given, especially, on the undesirable plantation of non-native tree species restricting the forest succession, as in the case of southern slope of Mt. Nam. First of all, the most importance in Mt. Nam management is that the restoration for natural forest and biodiversity should be carried on the basis of integrated ecological principles based on the site evaluation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.10
• /
• pp.773-778
• /
• 2012

A road energy harvester was designed and fabricated to convert mechanical energy from the vehicle load to electrical energy. The road energy harvester is composed of 16 piezoelectric cantilevers. We fabricated prototypes using a vehicle load transfer mechanism. Applying a vehicle load transfer mechanism rather than directly installing energy harvesters under roads decreases the area of road construction and allows more energy harvesters to be installed on the side of the road. The power generation amount with respect to the vehicular velocity change was assessed by installing the vehicle load transfer mechanism form and underground form. The energy harvester installed in the underground form generated power of 4.52 mJ at the vehicular velocity of 50 km/h. Also, power generation of the energy harvester installed in the vehicle load transfer mechanism form was 48.65 mJ at the vehicular velocity of 50 km/h.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.10
• /
• pp.766-772
• /
• 2012

Spring supported piezoelectric cantilever structures (SPCS) were fabricated for vibration-based energy harvester application. We selected four elastic springs (A, B, C, and D type) as cantilever's supporter, each elastic spring has a different spring constant (S). The C type of SPCS ($S_C$: 4,649 N/m) showed a extremely low resonance frequency of 81 Hz along with the highest power output of 38.5 mW while the A type of SPCS ($S_A$: 40,629 N/m) didn't show a resonance frequency while. Therefore, it is considered that the lower spring constant lead to a lower resonance frequency of the SPCS. In addition, a tip mass (18 g) at one end of the SPCS could further reduce the resonance frequency without heavy degradation of power output.

• Journal of Conservation Science
• /
• v.25 no.1
• /
• pp.87-100
• /
• 2009

We carried out the effect verification of conservation treatment focusing on basement rock of alkali granite at the Yukjonbul (two-pairs of Buddha Triads) carved on rock cliff of Samneung valley in Namsan mountain of Gyeongju. The conservation treatments were used to ethylsilicate-type rock consolidant and epoxy-type resin. It is treatment method that the epoxy-type resin have been applied one time into the exfoliation area, after rock consolidation treatment have been worked for three times. As the result of measuring ultrasonic velocity, P-wave velocity of the exfoliation area was relatively increased after applied the conservation treatments. The ultrasonic velocity of all area was increased as 27.8%. This result has been proved with consolidation effects by consolidant and filler for stone cultural heritages. The treatment method should be worked about three time to consolidate sufficiently for rocks.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.459-472
• /
• 2015

A recently developed tunnel section enlargement method can maintain traffic flow during construction by using a protector. By keeping traffic flowing, it can minimize the lost time and costs associated with diversions and also the accompanying environmental pollution. On the other hand, installing the protector can lengthen the construction period and increase the direct cost. This paper presents a method for analyzing the economic feasibility of tunnel section enlargement methods considering the direct construction cost and the indirect social cost. The indirect costs are divided into categories of: vehicle driving cost, travel time delay cost, and environmental pollution cost. The economic efficiency of existing technology is compared with the new method in an case study of Namsan Tunnel 3.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.274-274
• /
• 2007

LTCC 소재로 응용을 위해 Mg-Si-O계 세라믹스에 glass frit을 첨가하여 소결 및 마이크로파 유전특성에 관한 연구를 진행하였다. $Mg_2SiO_4$를 기본조성으로 하고 $B_2O_3-ZnO-Na_2O-SiO_2-Al_2O_3$계 glass를 20~40wt%로 첨가하여 $900^{\circ}C$에서 1시간 소결하였을 때 glass 함량이 증가함에 따라 밀도$(g/cm^3)$ 및 유전율$(\varepsilon_r)$은 증가하였고 품질계수$(Q{\times}f_0)$ 값은 감소하는 경향을 보였다. $900^{\circ}C$에서 1시간 소결한 소결체의 유전특성은 유전율 $(\varepsilon_r)$ = 6.5, 품질계수 $(Q{\times}f_0)$ = 4,000(GHz), 온도계수 $({\tau}_f)={\pm}10ppm/^{\circ}C$로 우수한 특성을 확인하였다. 그리고 Glass Milling 효과에 따른 glass-ceramics 소결체의 미세구조, 마이크로파 유전특성을 비교 고찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.310-310
• /
• 2007

Mg-Si-O계 세라믹스에 glass frit 조성을 첨가하여 저온에서의 소결 특성 및 마이크로파 유전 특성을 연구하였다. 기존의 Mg-Si-O계 세라믹스는 우수한 유전특성을 가지고 있으나 높은 소결온도로 인하여 LTCC용 기판 소재로 적용이 어려웠다. 본 연구에서는 MgO, $SiO_2$를 이용하여 $Mg_2SiO_4$을 합성한 후, $B_2O_3-ZnO-Na_2O-SiO_2-Al_2O_3$계 glass 조성을 20~40wt%로 첨가하여 소결온도를 감소시켜 LTCC 기판 소재로서의 적용성을 고찰하였다. glass frit 함량이 증가함에 따라 밀도($g/cm^3$) 및 유전율(${\varepsilon}_r$)은 증가하였고 품질계수($Qxf_0$)값은 감소하였다. glass frit 함량이 40wt%일때 $900^{\circ}C$에서 1시간 소결한 소결체의 유전톡성은 유전율 (${\varepsilon}_4$) = 6.5. 품질계수 ($Qxf_0$) = 4,000(GHz), 온도계수 $(\tau_t)\;=\;{\pm}\;10ppm/^{\circ}C$로 우수한 특성을 확인하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.852-856
• /
• 2014

$BaTiO_3$ nano powder can be synthesized by hydrate salt method at $120^{\circ}C$ in air. Decreasing the thickness of thick film, the nano dielectric particle is needed in electronic ceramics. However, the synthesis of $BaTiO_3$ nano particle at low temperature in air and their mechanism were not reported enough. And ultrasonic treatment can be tried because of low temperature process in air. Therefore, in this study, the $BaTiO_3$ nano powder was synthesised with the synthesis time and ultrasonic treatment at $120^{\circ}C$ in air. In the synthesis process, the effects of process were evaluated. From the experimental observation, the synthesis mechanism was proposed. The homogeneous $BaTiO_3$ particle was synthesised by KOH salt solution at $120^{\circ}C$ for 1hour. It was conformed that the ultrasonic treatment effected on the increase of synthesis rate. After cutting the salt powder using FIB, $BaTiO_3$ nano particles observed homogeneously in the cross-section of the salt particle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.635-638
• /
• 2004

페로브스카이트 구조를 가지는 $CaZrO_3$ 유전체 세라믹스에 $CaTiO_3$를 부피 비율로 첨가하여 첨가량 변동에 따른 마이크로파 유전 특성을 조사하였다. 또한 저온 동시소성 기능성 LTCC 기판용 유전체 소재로서 활용하기 위하여 저융점의 borosilicate계 유리 프리트를 첨가하여 $CaZrO_3-CaTiO_3$ 복합 유전체 세라믹스의 저온 소결 거동과 마이크로파 유전 특성을 평가하였다. 알칼리가 첨가된 저융점의 borosilicate계 유리 프리트를 $10\sim30$ wt% 범위로 첨가함으로서 $CaZrO_3-CaTiO_3$ 복합 유전체 세라믹스의 소결온도를 $1450^{\circ}C$에서 $900^{\circ}C$이하로 낮출 수 있었으며, 유리 프리트의 첨가량으로 공진 주파수 온도계수 특성을 조절할 수 있었다. 유리 프리트의 첨가량이 15 wt% 첨가시 $875^{\circ}C$에서 충분한 소결이 이루어졌으며, 이 경우 $CaZrO_3-CaTiO_3$ 복합 유전체 세라믹스는 유전율(k) 23, 품질계수(Qxf) 2500, 공진 주파수 온도계수 ($\tau_{cf}$) -3 ppm/$^{\circ}C$의 매우 양호한 마이크로파 유전 특성을 나타내었다. 유리 프리트의 첨가에 의하여 소결 과정에서 주상인 $CaZrO_3$가 $CaZr_4O_9$ 상으로의 변화가 뚜렷이 나타났는데, 이러한 상전이 현상과 함께 미세구조의 변화에 대해서도 고찰하였다.