• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.19-22
• /
• 2016

본 연구는 박각시 나방 유연날개의 준정상 공력 모델링을 위한 공력측정실험을 진행하였다. 두 개의 서보모터로 이루어진 동역학적 로봇 모델은 3톤 수조 내부에서 날갯짓 운동을 구현하였고, 6축 센서가 날개 모델의 뿌리에 장착되어 공력 측정을 시행하였다. 날개 모델은 다른 두께의 폴리카보네이트 평판으로 제작되었고, 3mm 두께의 강체날개와 0.8mm 두께의 유연날개로 구성되었다. 공력측정은 각 날개 모델별 받음각을 -5도에서 95도까지 5도씩 변경하여 진행하였고, 이를 바탕으로 준정상 공력 모델링을 시도하였다. 날개 두께별 준정상 공력 모델링을 통해 특정 두께를 가진 유연날개는 강체날개보다 높은 공력효율을 가짐을 알 수 있었고, 날개 유연도 역시 준정상 가정을 기반으로 모델링 할 수 있을 것으로 기대된다.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.293-298
• /
• 2004

We investigate the effect of the wing width and thickness of a Double-Sided Deep-Ridge(DSDR) vertical directional coupler on the coupling length dependent on the polarization, We have found that the DSDR vertical directional coupler without a wing does not have polarization independent coupling lengths. The variation of the coupling length of TE and TM modes and the difference between the coupling lengths of the two modes are negligible as the wing width increases beyond the specific wing width for the same wing thickness. Thus, we can see that a DSDR vertical directional coupler has a wing width larger than the minimum wing width to obtain the polarization independent coupling length. The minimum wing width increases as the wing thickness increases for the same core thickness and as the core thickness decreases for the same wing width. Also, we have found that the minimum wing thickness is determined by the core thickness and the minimum wing thickness decreases as the core thickness increases.

• Korean journal of applied entomology
• /
• v.53 no.2
• /
• pp.171-175
• /
• 2014

A taxonomic study of the genus Eudectus Redtenbacher in Korea is presented. Two species, E. japonicus Zerche and E. rufulus Weise, are newly added to the Korean fauna. Redescriptions, illustrations of the diagnostic features, and a key to the species are provided.

• Korean journal of applied entomology
• /
• v.52 no.3
• /
• pp.181-184
• /
• 2013

A taxonomic study of Korean Leptusa Kraatz is presented. Two species-L. (Drepanoleptusa) deplanata (Sawada) and L. (Eospisalia) kitazawai kitazawai (Sawada)-are recognized. The genus and species are recorded for the first time in Korea. A key, diagnoses, habitus photographs and illustrations of diagnostic characters are provided.

• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.317-322
• /
• 2018

In Vollenhovia emeryi (Hymenoptera: Myrmicinae), the queen and the male are known to be clonally reproduced. Its colonies can be classified into the two morphs with the wing length of the queen caste. The morph with normal wings is called the long-winged and the other the short-winged that is brachypterous. Even though the two morphs are considered a species, investigation on the species status of the two morphs was suggested with natural separation in nature and the distinctive wing morphology. It has yet to be determined whether the clonally reproduced queen caste is haploid or diploid. Our data clearly show that the two morphs are the same species and the queen caste is diploid on the basis of the genome size data comparison.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.11-23
• /
• 1997

This paper contains a new approach to blade section design method for marine propellers. The hydrodynamic characteristics of 2-D section are highly influenced by its geometrical parameters i.e., thickness and camber distributions and leading edge radius etc. To consider fully turbulent flow field near 2-D section. the finite volume method with k-${\varepsilon}$ turbulent model which solve Reynolds time averaged Navier-Stokes(RANS) equation is applied. In this study, O-type grid system that can provide many calculation points on blade surface is used. The results were compared with those of the experiment of NACA0012 to confirm the accuracy of the developed codes. The goal of this study is the development of a blade section with high efficiency and low drag. To achieve this, we carried out the tests of lift, drag and cavitation characteristics in cavitation tunnel. The results of experiment were compared with numerical results in order to validate the proposed blades design method. By comparing the numerical results with the experiments, we found that the new blade section, KH28 allows superior performance in efficiency and cavitation avoidance characteristics. We further investigated the blade section design method and an application study of this section, KH28 to apply to the marine propeller. In order to improve the accuracy of numerical results on prediction of lift and drag, we conclude here that the 2-layer boundary model must be used.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.1 s.2
• /
• pp.15-21
• /
• 1999

Some sized centrifugal compressors were designed and their performance measured to investigate the effects of exit blade thickness, width and back swept angle. The impeller of larger blade thickness shows low pressure ratio compared with that of smaller ones. Backswept angle also have a large effect on the efficiency. Measured values of slip factor are quite different from the estimated values of the Wiesner-Busemann model and an increase in the flow late.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.77-77
• /
• 2003

공생별의 고분산 분광 자료에서 대부분 발머 방출선은 매우 넓게 펼쳐진 날개 부분이 나타나며, 일부 어린 행성상 성운과 post-AGB별에서도 비슷한 현상이 보고되었다. 날개 부분의 형성 과정으로 현재 제안된 이론은 발머선 광자의 전자 산란과 수소 라이먼 방출선의 라만 산란이 있다. 우리는 이 연구에서 전자 산란과 라만 산란 과정에서 나타나는 날개 부분의 선윤곽의 미세한 차이점을 제시하고자 한다. 또한, 두 산란 과정이 공생별의 궤도 위상에 따라 나타나는 세기 변화의 양상을 계산하고, 장기간 관측을 통하여 공생별의 궤도 요소에 대한 정보를 얻을 수 있는 가능성에 대하여 토의한다.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.311-314
• /
• 2013

Blepharhymenus koreanus Pa$\acute{s}$nik and Tachyusa wei Pace are recorded for the first time in South Korea. Habitus photographs, redescriptions and illustrations of diagnostic characters are provided.

• 유체기계공업학회:학술대회논문집
• /
• 1998.12a
• /
• pp.135-141
• /
• 1998

Some sized centrifugal compressor were designed and their performance measured to investigate the effects of exit blade thickness, width and back swept angle. The impeller of larger blade thickness shows low pressure ratio compared with that of smaller one. Backswept angle have also large effect on the efficiency. Measured values of slip factor are quite different from the estimated values of Wiesner-Busemann model and increase with the flow rate.