• Korean journal of applied entomology
• /
• v.34 no.3
• /
• pp.249-255
• /
• 1995

These experiments were conducted to investigate the life history and the seasonal fluctuation of population density of tea red spider mite, Tetranychus kanzawai Kishida and to observe its natural enemies in the southern area. Under field-cage conditions, tea red spider mite occurred 11~12 generations. The average periods from egg to adult emergence were 8.7~13.1 days in summer and 12.6~24.9 days in spring and autumn. The average longevities of adults were 15.5~21.9 days in summer and 25.1~31.6 days in spring and autumn. The average number of eggs laid per female were 45.1 in summer and 52.6 in spring and autumn. Tea red spider mite population showed two peaks during April-June, and appeared third or forth peak during October-November. The density of all the stages was the lowest in July through August. Tea red spider mites stayed at lower parts of tea plants in March but they moved to upper parts in April though June, and they again moved to lower parts after autumn. Tea red spider mite overwintered as all stages. Adults were the dominant overwintering stage during this stage. The surveyed natural enemies of the tea red spider mite were 7 species including Amblyseius longispinosus (Evans), A. eharai Amitei et Swirski, Anystis baccarun (L), Agistemus fleschneri Summers, Orius sauteri Poppius, Oligota yasumatsui Kistner and Scolothrips sp.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.533-540
• /
• 2012

The use of wind energy is gaining importance because of its many advantages. Nations worldwide are promoting the installation of wind farms to produce electricity in an attempt to tackle climate change and increasing oil costs. But, wind turbines can generate undesired signals which disturb the performance of military radar systems. Because the current generation of on and off-shore three bladed wind turbines have radar signatures consistent with their very large physical size. So this study considers the options available for the reduction of wind turbine radar signature and presents solutions for each of the main external turbine components. The radar signature reduction approaches are based on existing technologies developed for aerospaces stealth applications. However, the realization of these for the purposes of reduction wind turbine radar signatures is a novel development, particularly in the solutions proposed. This paper is presented techniques which reduce radar signatures of wind turbine. We know that radar signatures of wind turbine reduce by using these techniques.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.5
• /
• pp.379-389
• /
• 2020

In this study, the flow and noise performances of high-speed fan motor unit for cordless vacuum cleaner is improved by optimizing the impeller which drives the suction air through flow passage of the cordless vacuum cleaner. Firstly, the unsteady incompressible Reynolds averaged Navier-Stokes (RANS) equations are solved to investigate the flow through the fan motor unit using the computational fluid dynamics techniques. Based on flow field results, the Ffowcs-Williams and Hawkings (FW-H) integral equation is used to predict flow noise radiated from the impeller. Predicted results are compared to the measured ones, which confirms the validity of the numerical method used. It is found that the strong vortex is formed around the mid-chord region of the main blades where the blade curvature change rapidly. Given that vortex acts as a loss for flow and a noise source for noise, impeller blade is redesigned to suppress the identified vortex. The response surface method using two factors is employed to determine the optimum inlet and outlet sweep angles for maximum flow rate and minimum noise. Further analysis of finally selected design confirms the improved flow and noise performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.35-42
• /
• 2020

Electromechanical Actuator(EMA) for flight vehicles generally serves to control the fin deflection angle or the thrust vector angle. This paper deals with design and development of EMA for both aerodynamic control and thrust vector control. In this paper, a novel compact EMA is proposed that can simultaneously control both the tail fin and the jet vane with one actuator and detach the jet vane after vertical launch and rapid turn of the flight vehicle so as to increase efficiency during flying to target. To do this, we designed the EMA using a push-push link mechanism and derived a mathematical model. The mathematical model is validated by comparing simulation result and experimental data. The performance and reliability of the proposed EMA have been verified through performance test, environmental test and ground test. The proposed EMA is expected to be useful as an EMA for flight vehicles because of its simple and compact structure, as well as its performance and reliability.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.23-34
• /
• 2022

Cities around the world are increasing their demand for Urban Air Mobility (UAM) aircraft due to traffic congestion with population concentration. Aircraft with various shapes depending on fixed-wing and propulsion systems, are being prepared for commercialization. Airworthiness certification is required as it is a manned transportation vehicle that flies in the city center and transports people on board. UAM aircraft are vulnerable to lightning and HIRF environments due to the increasing use of composite materials, the use of electric motors, and use of electronic equipment. Currently, the development of certification technology, guidelines, and requirements in lightning and HIRF environments for UAM aircraft is incomplete. In this study, the certification procedures for lightning and HIRF indirect impacts of rotorcraft shown in AC 20-136B and AC 20-158A issued by the Federal Aviation Administration (FAA), were verified and applied to the computerized simulation of UAM aircraft. The impact of lightning and HIRF on ducted fan UAM aircraft was analyzed through computerized simulation, and the basis for establishing practical guidelines for certification of UAM aircraft to be operated in the future is presented.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.250-261
• /
• 2023

In this study, the noise contributions by the duct, stator and rotor, which are the propulsor components, are evaluated to identify the flow noise source in cavitation and non-cavitation conditions on pumpjet propulsion and the noise levels in both conditions are compared. The unsteady incompressible Reynolds averaged Navier-Stokes (RANS) equation based on the homogeneous mixture assumption is applied on the suboff submarine hull and pumpjet propeller in the cavitation tunnel, and the Volume of Fluid (VOF) method and Schnerr-Sauer cavitation model are used to describe the two-phase flow. Based on the flow simulation results, the acoustic analogy formulated by Ffowcs Williams and Hawkings (FW-H) equation is applied to predict the underwater radiated noise. The noise contributions are evaluated by using the three types of impermeable integral surface on the duct, stator and rotor, and the two types of permeable integral surface surrounding the propulsor. As a result of noise prediction, the contribution by the stator is insignificant, but it affects the generation of flow noise source due to flow separation in the duct and rotor, and the noise is predominantly radiated into the upward and right where the flow separations are. Also, the noise is radiated into the thrust direction due to pressure fluctuation between suction and pressure sides on the rotor blades, and the it can be seen that the cavitation effect into the noise can be considered through the permeable integral surface.

• Journal of Korean Society of Forest Science
• /
• v.2 no.1
• /
• pp.59-65
• /
• 1962

The objects of this experiment are to find out the local variation of the Dendrolimus Spectabilis Butler, of which sample was first collecteted 15 bodies of male and 35 bodies of female adult at Suwon area. the wing veins and the scale shape have been observed through the microscope (100) and the scale size (from the bottom of the scale to the top of the lobe) has also been measured by the micrometer. The results of this experiment are as follows: 1. There is nodifference between the venation of the male body and that of the female body. Also we can not find any differences between the right and the left wing, and between each body. The fore wings consit of 13 longitudinal veins and the only one "V" shape cross vein which is between the 5th and 6th vein. The hind wings consist of 9 longitudinal veins and the only one "V" shape cross vein which is mentioned above. 2. The scale types are divided into 4 Groups in its shape. (A) The scales of I Group are short and the lower parts of them almost look like a circle, having a small projection at their bottom. The upper parts of them have 2 or 10 lobes. We can find the lobes with fine hairs or the lobes without them at the top of the scales. (B) The scales of II Group are longer than that of I Group. The shape of the lower parts of the scales is similar to that of I Group. The upper parts of the scales have 2 or 10 lobes. (C) The scales of III Group are long and almost alike in a long wedgeshape. The upper parts of the scales have 2 Or IO lobes and we can find long fine hairs at the top of each lobe. (D) The scales of IV Group are long and the shape of the lower parts of the scales is similar to that of III Group. The lobes are short and not sharp. We can find 2 or 9 lobes. 3. The scales of I Group and II Group are distributed on the whole surface except on the outer margin. The most scales of III Group are distributed on the wing base. The scales of IV Group are distributed on the outer margin only. The scales with 4 or 5 lobes are most widely distributed not considering their Group or distributing parts. 4. In I Group the variation of the scale length become gradually greater as the number of the lobes are increasing. In II, III, IV Group, however, the variation of the scale length is in direct opposition to the above mentioned. The variation of the scale width becomes pretty small in any Groups and the scale width become wider as the number of the lobes are increasing. 5. The source of the wing colouration is pigmnetal colour, and the wing colouration is expressed by the amount of brown and white scales.

• Journal of Korean Society of Forest Science
• /
• v.76 no.2
• /
• pp.109-118
• /
• 1987

The purpose of this study was to investigate the inhabiting ecology of wild birds using artificial nests in Gyeongnam province. The sort of birds, the utilization of artificial nests by the materials, by the sites and by the forest type, and other inhabiting ecology of birds were investigated from 1984 to 1986. The results obtained were as follows; 1. Wild birds in surveyed areas were classified into 20 families and 35 species. Among them the birds inhabiting the artificial nests were 6 species and those using them most frequently were Parus ater (17.2%), P. major (16.7%) and P. palustris (12.2%). 2. The artificial nests installed on the top and at the toot of the mountain were chiefly utilized by P. ater and P. major, but the artificial nests in park area were mostly used by Passer montanus and Sturnus cineraceus. 3. Sixty-one percent of the artificial nests were utilized by the birds; 45.5% were used for breeding and 15.6% were inhabitation only. 4. When different nest materials and shapes were tested, mixed nests (sawdust and cement) were used most frequently, and C type. (Diamond shape) of wood nests was used more frequently compared with the A (Roof shape) and B (Box shape) types of wood nests. Meanwhile, the birds prefered the 3cm hole size (81.1% of utilization) to 4cm of hole (57.8%) and 5cm of hole (24.4%). 5. The artificial nests constructed in mixed forest were more frequently inhabited (73.3%) by the birds than coniferous forest (68.3%) and broad-leaved forest (63.3%). 6. The period of egg-laying in Parus species was from late April to early May, while Eophona migratoria, Lanius bucephalus, Motacilla alba and Passer montanus laid eggs generally in the middle of May. 7. Parus species, Passer montanus and Motacilla alba laid one egg every day for 5-10days, but Eopphona migratoria laied 4 eggs in 7 days and Lanius bucephalus laid 5 eggs in 4 days. The incubation period of Parus species was 16-18 days, while the others were about 11 to 14 days. 8. Thirteen days after the hatch of Parus major, chicks reached 13.9g of body weight, 72.0mm of wing-length and 20.9mm of tarsus length. P. montanus chicks reached 20.3g of weight, 66.2mm of wing-length and 20.2mm of tarsus length during the same period. 9. Food item of feeding chicks almost consisted of creatures (98.2%) with following composition; 55.2% of insect larvae, 37.2% adult insects, 2.8% of pupae and 2.8% of spiders. Vegetable items were 2% only. Among those creature food items, 95.2% were insect pests to forest.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.129-150
• /
• 1985

The present investigation was conducted to provide a systematic approach necessary to establish an integrated insect pest management program of barley in Korea. Some ecological surveys on insect pests of barley have been undertaken at the field of Experimental Station, Ky$\check{o}$ngbuk Provincial Office of Rural Development as a fixed point survey area, and at 23 localities for round survey throughout southern and central Korea from 1983 to 1984. Previously known insects injurious to barley in Korea were revised and the population dynamics of 10 dominant harmful species were analyzed according to either 24 localities or 25 cultivars respectively by using several sampling methods of net sweeping, black light traps, yellow water pan traps and visual counting. As the results, a total of 94 species belonging to 77 genera under 32 families are known to be injurious to barley, among them 20 species are newly added here. In the population density level, the dominant species were disclosed as Laodelphax striatellus (43.1 %), Macrosiphum avenae(27.0 %), Rhopalosiphum padi(6.5 %), R. maidis(5.4 %), Psammolettix strialus(2.7 %), Chlorops oryzae(2.2 %), Agromyza albipennis(2.1 %) Phyllotreta nemorum(1.4 %), Chaetoenema cylindrica(1.0 %), Dolycoris baccarum(1.0 %) in order. For the general abundance of major insect pests, it was highest in the cultivar P'aldal whereas lowest in Milyang #22. There were tendencies that Psammotettix striatus, Dolycoris baccarum, Phyllotreta nemorum and Chaetocnema cylindrica represented a maximum increase in the beginning of June, while Chlorops oryzae and Agromyza albipennis showed in the middle of May but aphids were in the end of May. In the dominance of natural enemies, Nabis stenoferus occupied 21.4 % and Propylaea japonica 9.6 %.

• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.424-430
• /
• 1990

The variation of needle, cone and seed characteristics and of allelic frequency in isoenzyme, ADH, ME and PGI, according to different resin duct index in Pinus densiflora, Pinus thunbergii and their hybrids was analyzed. The results obtained were as follows : 1. With increase of number of resin ducts, morphological characteristics such as needle length, needle sheath length, cone size, seed size, seed wing size, 1000 seeds weight, etc. tended to he increased, while number of stomata row in needle to be decreased. 2. As the results of discriminant analysis for the morphological characteristics of needle, cone and seed, most individuals are generally coincided with number of resin duct mostly in Pinus densiflora were not. 3. According to the canonical discriminant function obtained from the morphological characteristics in Pinus densiflora, Pinus thunbergii and their hybrids including introgressive hybrid, the resin duct index, 1000 seeds weight, cone size and neelde sheath length characterized fairly their species. 4. With increase of resin duct index, hybrid index tended to be higher. The results obtained from the discriminant analysis and the hybrid index were nearly same each other. 5. With increase of number of resin duct, the allelic frequencies for isoenzyme, ADH-$B_2$, ME-$A_2$ and PGI-$B_1$. $B_2$ tended to increase but those of ADH-$B_3$, ME-$A_4$, and PGI-$B_3$, to decrease. It is thought that this increase of frequency for the former four isoenzymes was resulted in introgressive gene flow from Pinus thunbergii to Pines densiflora and accordingly the frequency of latter three isoenzymes tended to decrease.