• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.7-15
• /
• 2006

The effects of strake incidence-angle on the vortex characteristics and the wing-surface pressure distribution for a double-delta wing with strake were investigated experimentally. The strake incidence-angle of negative sign(strake is pitched down from the main-wing upper-surface) increased the suction pressure of the wing-upper surface, which was the same effect of increase of angle of attack. This change of the suction pressure was caused by the closer movement of the vortex cores to the wing upper surface rather than the increase of the vortex strength.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.2
• /
• pp.98-106
• /
• 2019

Human-powered aircraft has wings with a shape of high aspect ratio which results in large bending displacement. This paper aims to improve the structural limitation by changing an incidence angle of the wings. The tendency change of bending displacement at the wing tip is observed assuming that airfoil and cross-sectional shape of the wing is fixed, and amount of the total lift generated is satisfied. Quasi-steady lift, drag and the aerodynamic moment are distributed with regard to sections of the wing. Those are analyzed using a numerical nonlinear lifting-line method and 'geometrically exact beam' (GEB) program in EDISON. 'Variational Asymptotic Beam Sectional Analysis' (VABS) program is used to check if the present wing is structurally solid. Furthermore, the predicted tip deflections are verified by comparing with DYMORE.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.273-279
• /
• 2011

Turbulent flow analysis around a wind turbine blade was performed to evaluate the power performance of offshore wind turbine. Fluent package was utilized to solve the Reynolds-averaged Navier-Stokes equations in non-inertial rotating coordinates. The realizable k-$\varepsilon$ model was used for turbulence closure and the grid system combining structured and unstructured grids was generated. In the first, lift and drag forces of 2-D foil section were calculated and compared with existing experimental data for the validation. Then torque and thrust of the wind turbine blade having NACA 4-series sections were calculated with fixed pitch angle and rpm. Tip speed ratio was varied by changing wind speed. In the next, three kinds of end plate were attached at the tip of blade in order to increase the power of the wind turbine. Among them the end plate attached at the suction side of the blade was found to be most effective. Furthermore, performance analysis with tilt angle and rake was also performed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.14-21
• /
• 2006

The unsteady vortex lattice method is used to model twisting and flapping motions of a rectangular flat plate wing. The results for plunging and pitching motions were compared with the limited experimental results available and other numerical methods. They show that the method is capable of simulating many of the features of complex flapping flight. The lift, thrust and propulsive efficiency of a rectangular flat plate wing have been calculated for various twisting angles and reduced frequency with an amplitude of flapping angle($20^{\circ}$). And the effects of the twisting on the aerodynamic characteristics of the flapping wing are discussed by examination of their trends.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.2
• /
• pp.57-80
• /
• 1994

항공기에 사용되는 2차 조종면은 플랩, 탭, 스포일러 등 여러 종류가 있으며 이중 spoiler는 공력제어 기능을 가지고 항공기의 조종성에 영향을 미치는 조종면으로 속도 감속이나 옆놀이 조종용으로 사용된다. 본 연구에서는 비행제어용 spoiler 기능과 고양항력을 얻을 수 있는 새로운 장치인 고양항력 panel에 대한 공력특성 및 비행제어 특성에 대하여 연구하였다. 이러한 고양항력 panel은 재래식인 spoiler가 양력을 감소시키고 항력만 증가시키는 장치인데 반하여 양력과 항력을 동시에 증가 시킬 수 있는 새로운 장치로서 날개의 앞전 윗면에 스팬방향으로 설치하여 슬롯효과를 발생시킴으로써 최대 양력 받음각에서 앞전에서의 박리를 막아 비행기의 착륙시 양력의 급작스러운 감소로 인한 불안정성을 감소시키게 된다. 본 논문에서는 직사각형 날개 및 FA-200모형의 날개위에 고양항력 panel을 설치하여 풍동실험 및 수치계산을 한 결과를 기술하였다. 실험결과 직사각형 날개의 경우 고양항력 panel의 위치는 날개의 앞전에 설치할 경우 고받음각에서 실속지연의 효과와 함께 후방실속의 특성을 향상 시킬 수 있으며, 항력의 증가로 인한 스포일러 효과를 얻을 수 있다. 양항비특성은 고양항력 panel을 날개의 앞전에설치하고, 그폭이 시위의 1/5이고, 붙임각 ${\theta}$가 $10^{\circ}$, 높이가 시위의 3/20일때 받음각 $18^{\circ}$ 이후에서 우수한 특성을 나타내었다. FA-200 모형의 경우 옆놀이 모멘트계수는 받음각이 작을 때 고양항력 panel의 슬롯간격과 붙임각이 작을수록 커지나 받음각이 커지면 붙임각이 커짐에 따라 증가함을 알 수 있다. 또한 키놀이 모멘트계수는 크게 변화하지 않으나 항력 특성은 고양항력 panel의 붙임각이 증가함에 따라 증가하였다. 고양항력 panel의 붙임각이 큰 범위에서 (${\theta}$ =$10^{\circ}$) 공기력의 증가는 고양항력 panel의 시위가 날개시위의 30%이고 슬롯의 폭이 날개시위의 10%일때 증가하는 결과를 얻을 수 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.3
• /
• pp.263-268
• /
• 2011

We aimed to develop a non-clogging submersible slurry pump with two blades to replace the conventional vortex pump. To do this, we simulated the effect of parameters such as the blade angle $\beta$ and the blade-length angle $\alpha$ on pump efficiency. We used the commercial codes ANSYS CFX and BladeGen. The results showed that the best blade shape was obtained for $\beta$ = $30^{\circ}$ and that the pump efficiency was proportional to $\alpha$ in the simulated range.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.931-939
• /
• 2013

In this paper, we try to find the lifting-line method which is applicable to the conceptual design of aircraft wings, and analyze the accuracy and coverage of the method. Two methods that are extended from the lifting-line theory of Prandtl are selected. One of the methods is Weissinger's method which imposes the velocity boundary condition at the control points located at the quarter chord, and the other is Phillips's method which combines the three-dimensional vortex lifting law. Calculations are performed for an elliptic wing, a swept back wing, and a tapered unswept wing with dihedral angle and geometric twist. The aerodynamic data of the potential flow such as spanwise distributions of circulation and downwash, lift and induced drag are obtained through calculations, and these data are compared with theoretical results and wind tunnel test data. As a result, Weissinger's method showed good accuracy and reliability regardless of wing shapes, but Phillips's method revealed inaccurate results for a swept back wing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.17-24
• /
• 2003

This paper presents results from steady wind tunnel test conducted on a $65^{\circ}$ delta wing at a root chord Reynolds number of $1.76{\times}10^6$. In these experiments, the wing was instrumented with 188 pressure taps, conjunction with powerful multi-channel data logging system, allowed the wing upper surface pressure distribution to be measured. Analysis indicates that the wing upper surface distribution can provide considerable insight into the comvined aerodynamic effects of angle of attack and sideslip on the wing. In a sideslip condition, the strength of the vortex on the windward side is much stronger than that of leeward side. This asymmetric pressure disstribution betwwen each side of wings result in a negative value of rolling moment. However, at a certatin range of angle of attck and sideslip angle(${\alpha}$=$24^{\circ}{\sim}36^{\circ}C$, ${\beta}$=$-5^{\circ}{\sim}-15^{\circ}C$) abrupt change of sign of rolling monent, rolling monent reversal, was observed.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.19-22
• /
• 2016

본 연구는 박각시 나방 유연날개의 준정상 공력 모델링을 위한 공력측정실험을 진행하였다. 두 개의 서보모터로 이루어진 동역학적 로봇 모델은 3톤 수조 내부에서 날갯짓 운동을 구현하였고, 6축 센서가 날개 모델의 뿌리에 장착되어 공력 측정을 시행하였다. 날개 모델은 다른 두께의 폴리카보네이트 평판으로 제작되었고, 3mm 두께의 강체날개와 0.8mm 두께의 유연날개로 구성되었다. 공력측정은 각 날개 모델별 받음각을 -5도에서 95도까지 5도씩 변경하여 진행하였고, 이를 바탕으로 준정상 공력 모델링을 시도하였다. 날개 두께별 준정상 공력 모델링을 통해 특정 두께를 가진 유연날개는 강체날개보다 높은 공력효율을 가짐을 알 수 있었고, 날개 유연도 역시 준정상 가정을 기반으로 모델링 할 수 있을 것으로 기대된다.

• Composites Research
• /
• v.13 no.2
• /
• pp.61-71
• /
• 2000

Today, the use of composite materials become an essential part in the design and manufacturing process of the flight vehicles to reduce the structural weight. Since the structural properties can be varied largely due to the stacking sequence of ply angles, it is very important problem to determine the optimized ply angles under a design objective. Thus, in this study, the analysis of static aeroelastic optimization of a composite wing has been performed. An analytical system to calculate and optimize tile aero-structural equilibrium position has been developed and incorporated with the genetic algorithm. The effects of stacking sequence on the structural deformation and aerodynamic distribution have been studied and calculated with the condition of minimum structural deformation for a swept-back composite wing. For the set of practical stacking angles, the design results to maximize the performance of static aeroelasticity are also presented.