• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.133-139
• /
• 2000

일방향흐름의 해류나 천해파에 의한 파운동이나 해저면 가까이 경계층흐름은 주로 난류특성을 갖고 있으며, 난류특성은 완난류, 천이난류, 전난류 등 세 가지 증류로 대별된다. 그 중 완난류와 전난류로 대별하여 합성류 조건은 두 가지로 분류할 수 있다. 즉, 천해파와 해류가 합성될 때 해저면 가까이 난류특성 조건은 Table 1에 제시된 바와 같다. (중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.912-919
• /
• 1990

본 연구에서는 다중선회연소기의 원리에 기초하여 속도차가 있는 두 공기류의 전단층에 기체연료를 분출하여 연소시키면 연료가 두 공기류 사이에 유입되므로 연료 가 산화제의 접촉면적이 증대되고 또한 난류혼합속도가 큰 영역으로 연료가 유입되므 로 혼합효과가 증대되어 고부하연소에 적절한 방식이 될 것으로 생각하여 동축이중공 기분류중의 난류 확산화염에 대해 그 화염구조를 밝히고 이 화염을 실용연소기에 응용 하기 위한 기초자료를 얻는데 목적이 있다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.05a
• /
• pp.28-38
• /
• 1994

분류층 가스화기 설계를 위한 일차연구로서 가스화기 이차공기 주입방법에 따른 비반응 난류장에 대한 수치해석을 검사체적에 기초한 유한차분방법을 이용하여 수행하였다. 압력과 속도의 연계문제는 SIMPLEC 알고리즘을, 레이놀즈 전단력은 k-$\varepsilon$ 난류모델을 사용하였다. 입자궤적 계산은 공기역학적 항력만을 고려하였으며 비선형적인 공기저항력에 의한 난류변동상관모델은 고려치 않았다. 이차공기 주입방법(parallel injection과 nonparallel 3$0^{\circ}C$ injection)에 따른 수치해석을 수행하여 Ar tracer의 질량분율에 대한 실험자료와 비교하여 만족할 만한 결과를 얻었으며 이차공기의 주입각 및 기타 제반변수에 따른 유동장 변화를 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.732-742
• /
• 1985

Measurements of mean velocity and turbulence characteristics are obtained with a linearized constant temperature hot-wire anemometer in a two-dimensional turbulent jet discharging parallel to a flate. Wall static pressure distribution is also measure. The Reynolds number based on the jet nozzle width (D) is about 42,000 and the step height is 2.5D. The reattachment length is found to be 7.5D by using both wool tuft and oil methods. Upstream of the reattachment point, there exist double coherent structures and mean velocity, Reynolds stresses and triple product profiles are asymmetric about jet center line due to the influence of streamline curvature and recirculating flow region. Near the reattachment point, wall static pressure and turbulence quantities change its shape rapidly because of the large eddies by the solid wall. Especially, turbulence intensity has a maximum value in the reattachment regin, then decreases slowly in the redeveloping wall jet ragion. Downstream of X/D=14, a single large scale eddy structure is formed. Far downstream affer the reattachment(X/D.geq.18) mean velocity profile, the decay of maximum velocity and the variation of jet half width are nearly similar to those of plane wall jet, but the Reynolds stresses are higher than those of the latter.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.3
• /
• pp.248-256
• /
• 1995

The numerical study on the surface buoyant jets has remained of requiring more intensive investigation for problems due to the treatments of free surface, Reynolds stress/flux terms in turbulent flow and especially buoyancy effects on the turbulent fluctuation. etc. The verification of predicted results from the numerical study continues in the qualitative study. because of the lack of experimental data, which seems to be due to the difficulties in measuring the turbulent fluctuations in concentration or temperature fields. In this study, the computer program of Algebraic Stress Model has been developed to investigate the behaviours of two-dimensional surface buoyant jets with free surface boundary condition. The computational results are compared with published experimental data. By comparing these results with experimental data. it is found that this model can predict fairly well the flow characteristics of two-dimensional surface buoyant jets in the momentum-dominant region and buovancy-dominant region. Especially, it is proved that this model can predict the flow characteristics reasonably in buoyancy-dominant region stably stratified due to buoyancy effect.

• Water for future
• /
• v.29 no.2
• /
• pp.221-233
• /
• 1996

To investigate the hydrodynamic characteristics of a two-dimensional buoyant surface jet, the most important factors of the numerical analysis are the evaluation of the free surface and the turbulence transportation under the stratification. In present study, a numeriacal simulation model used with the semi-implicit method for pressure-linked equations (SIMPLE), the non-hydrostatic approximation and the algebraic stress model (ASM) is applied to investigate the vertical structure of internal flow hydrodynamically. The ASM enables to take account of anisotropy of turbulence, the damping effects of the density interface, and the free surface on the turbulence structure accurately. The ASM tested produces better agreement than the $\kappa-\varepsilon$ model with measurements by Nakatsuji (1984) on the flow development and turbulence structure. Applicability of the ASM to a two-dimensional buoyant surface jet is examined through comparison with experimental data.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.962-978
• /
• 1989

A new model of the combustion rates of soot particle in turbulent flames has been suggested. This model applies the combustion rate of soot particles in laminar flames and uses local time-averaged quantities in order to consider the effect of the chemical reaction on the soot combustion in turbulent flames. The proposed rate equation has been tested for two propane-air turbulent round-jet diffusion flames and gives better predictions for the soot concentration field of two flames than the model previously used, especially in low temperature regions. A modified Monte carlo Method for analyzing radiative heat transfer of a flame also has been suggested and tested, which reveals good results.

• Journal of Energy Engineering
• /
• v.4 no.1
• /
• pp.23-30
• /
• 1995

분류층 가스화기 설계를 위한 일차연구로서 가스화기 종횡비, 주입方法, 선회강도 및 주입속도 등에 따른 비반응 난류장 특성을 수치해석적 방법에 의해 파악하였다. 수치해석은 검사체적에 기초한 Patankar의 유한차분방법을 이용하였으며 압력과 속도의 연계문제는 SIMPLEC 알고리즘을, 레이놀즈 전단력은 K- 난류모델을 사용하였다. 입자궤적 계산은 공기역학적 향력만을 고려하였으며 비선형적인 공기저항력에 의한 난류변동상관모델은 고려치 않았다. 이차공기 주입방법(parallell injection과 nonparallel 3$0^{\circ}C$ imjection)에 따른 수치해석을 수행하여 Ar tracer의 질량분율 및 기타 속도에 대한 實驗資料와 비교하여 만족할 만한 結果를 얻었다. 나아가서 假想的인 가스화기 모델을 대상으로 가스화기의 종횡비, 선회강도, 주입속도 및 주입각 등에 따른 와류 形成 위치 등을 포함한 유동장 특성 및 입도에 따른 궤적분석을 시도하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.3
• /
• pp.130-138
• /
• 2000

The friction factor equation of open channel flow is developed by using Prandtl's mixing length theory and considering the flow characteristics of smooth or rough turbulent flow. BYO model considers vertical velocity profile for the (:omputation of bottom friction of surface waves and current flow. The model computes the mean bottom friction of combined wave-current flow by the vectorial summation of wave velocity and current velocity at Bijker point. The near bottom flow is discriminated by three flow regimes; smooth, transitional and rough turbulent flow. The model, BYO, has been further refined considering the combination of smooth turbulent flow and rough turbulent flow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.2
• /
• pp.147-155
• /
• 2001

Experimental investigations were conducted for two hydrogen-nitrogen coaxial jet diffusion flames. A flame was a conventional coaxial jet diffusion flame and the other was a coaxial jet diffusion flame of which ambient air-jet turbulence was intensified. In this study, firstly two kinds of NOx measuring system were campared by using different convertors, secondly the NOx formation characteristics were investigated in order to examine the effect of turbulence intensity. In this study it is known that stainless convertor has some problem in the converting process from NO$_2$to NO in fuel rich region but molybdenum convertor can detect the amount of NOx correctly. The increase of turbulence intensity reduces the thermal NOx less than a half in our experiment and this effect is conspicuous near the nozzle. The conversion rate from NO to NO$_2$and the portion of NO$_2$among NOx are increased with turbulence intensity. These NOx measurements will help to understand the influences of turbulence intensity on NOx formation.