• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.224-232
• /
• 2000

Four turbulent $k-{\varepsilon}$ models (i.e., standard model, modified models with streamline curvature modification and/or preferential dissipation modification) are applied in order to analyze the turbulent flow of wall-attaching offset jet. For numerical convergence, this paper develops a method of slowly increasing the convective effect induced by skew-velocity in skew-upwind scheme (hereafter called Partial Skewupwind Scheme). Even though the method was simple, it was efficient in view of convergent speed, computer memory storage, programming, etc. The numerical results of all models show good prediction in first order calculations (i.e., reattachment length, mean velocity, pressure), while they show some deviations in ·second order (i.e., kinetic energy and its dissipation rate). Like the previous results obtained by upwind scheme, the streamline curvature modification results in better prediction, while the preferential dissipation modification does not.

• 한국전산유체공학회지
• /
• 제8권2호
• /
• pp.57-63
• /
• 2003

Two nonlinear κ-ε models with the wall function method are applied to the fully developed turbulent flow in a square duct. Typical predicted quantities such as axial and secondary velocities, turbulent kinetic energy and Reynolds stresses are compared in details both qualitatively and quantitatively with each other. A nonlinear κ-ε model with the wall function method capable of predicting accurately duct flows involving turbulence-driven secondary motion is presented in the present paper. The nonlinear κ-ε model of Shih et al.[1] adopted in a commercial code is found to be unable to predict accurately duct flows with the prediction level of secondary flows one order less than that of the experiment.

• 한국전산유체공학회지
• /
• 제8권2호
• /
• pp.8-15
• /
• 2003

Three nonlinear κ-ε models with the wall function method are applied to the fully developed turbulent flow in a triangular subchannel of a bare rod bundle. Typical predicted quantities such as axial and secondary velocities, turbulent kinetic energy and wall shear stress are compared in details both qualitatively and quantitatively with both each other and experimental data. The nonlinear κ-ε models by Speziale[1] and Myong and Kasagi[2] are found to be capable of predicting accurately noncircular duct flows involving turbulence-driven secondary motion. The nonlinear κ-ε model by Shih et aL.[3] adopted in a commercial code is found to be unable to predict accurately noncircular flows with the prediction level of secondary flows one order less than that of the experiment.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.68-81
• /
• 2000

Many studies for improving a scavenging efficiency have been executed by using simulative manner. This paper addresses to a scavenging process in a uniflow two stroke cycle engine. The Processes are simulated for scavenging pressure variation, after the assessment of turbulent models. The results have shown that employing RNG k-$\varepsilon$ model gave more accurate velocity profiles near the cylinder wall compared with the standard k-$\varepsilon$ model and the charged fresh air has increased with the scavenging pressure increase.

• 한국전산유체공학회지
• /
• 제8권1호
• /
• pp.23-29
• /
• 2003

Two nonlinear κ-ε models with the wall function method are applied to the fully developed turbulent flow in a square duct. Typical predicted quantities such as axial and secondary velocities, turbulent kinetic energy and Reynolds stresses are compared in details both qualitatively and quantitatively with each other. A nonlinear κ-ε model with the wall function method capable of predicting accurately duct flows involving turbulence-driven secondary motion is presented in the present paper. The nonlinear κ-ε model of Shih et al.[1] adopted in a commercial code is found to be unable to predict accurately duct flows with the prediction level of secondary flows one order less than that of the experiment.

• 한국수자원학회논문집
• /
• 제56권spc1호
• /
• pp.1059-1069
• /
• 2023

댐붕괴흐름은 댐이 갑자기 붕괴하여 제어가 어려운 상태의 고속흐름이 방출되는 현상이다. 이 연구에서는 3차원의 댐붕괴흐름을 모의하기 위해 OpenFOAM을 사용하여 층류 및 난류 모델을 적용하고 그 결과를 비교하였다. 난류 모의를 위해 레이놀즈 평균 나비에-스토크스 (Reynolds-Averaged Navier-Stokes) 모델, 구체적으로 k-ε 모델을 사용하였다. 수리모형실험과 함께 수정된 다층 블록 장애물 시나리오를 대상으로 두 가지 모델을 평가하였다. 두 모델 모두 댐붕괴흐름을 효과적으로 재현하였으며, 난류 모델은 흐름의 변동성을 감소시키는 역할을 보여줬다. 그러나 난류 모델에서의 과도한 에너지소산은 수위를 과소 평가하게 하는 것으로 나타났다. 수치기법 및 격자 해상도를 개선하여 적용한 결과 흐름재현성이 향상되었는데 이는 특히 구조물 근처의 난류흐름에서 두드러졌다. 모델 안정성의 경우 난류모델의 사용여부보다는 수치기법 및 격자 해상도의 개선에 더 크게 영향을 받았다. k-ε 모델에 내재된 시간평균처리의 특성은 불연속성과 불안정성이 두드러진 댐붕괴흐름을 재현하는 데 한계가 있음을 나타냈다. RANS 모델을 포함한 난류모의는 방대한 계산자원이 필요하지만, 층류 모델과 비교하여 성능 향상이 제한적이었다. 댐붕괴흐름을 정확히 재현하기 위해 LES (Large Eddy Simulation) 및 DNS (Direct Numerical Simulation)과 같은 고급 난류 모델의 사용이 권장되며, 이를 위해서는 미세한 공간 및 시간 스케일의 구성이 필수적이다. 이 연구를 통해 댐붕괴흐름을 모의할 때 기본적으로 사용할 수 있는 주요 접근법과 적용가능성을 측정하였으며, 구조물 근처에서 난류흐름에 대한 정확한 표현의 중요성을 강조할 수 있었다.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.999-1011
• /
• 1989

본 연구의 목적은 첫째, 재발달 경계층에서의 난류에서지 및 난류전단응력에 대한 전달방정식들의 각 항의 측정자료들을 보다 정확히 제시하고 항들간의 균형을 비교 평가함으로써 비평형 유동으로부터 평형유동으로 회복되는 과정을 검토하고, 둘째, 대표적인 난류 모델들로써 표존 k-.epsilon.모델 및 레이놀즈 응력 모델을 사용한 수치계산을 수행함으로써 이와같은 모델들이 비평형 유동을 서술함에 있어 발생될 수 있는 문제점들을 고찰하는데 있다.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.12-24
• /
• 2016

The standard ${\kappa}-{\varepsilon}$ and realizable ${\kappa}-{\varepsilon}$ models are adopted to improve the prediction performance on the recirculating flow. In this paper, the backward facing step flows are used to assess the prediction performance of the recirculation zone. The model constants of turbulence model are obtained by the experimental results and they have a different value according to the flow. In the case of an isotropic flow situation, decaying of turbulent kinetic energy should follow a power law behavior. In accordance with the power law, the coefficients for the dissipation rate of turbulent kinetic energy are not universal. Also, the other coefficients as well as the dissipation coefficient are not constant. As a result, a suitable coefficients can be varied according to each of the flow. The changes of flow over the backward facing step in accordance with model constants of the ${\kappa}-{\varepsilon}$ models show that the reattachment length is dependent on the growth rate(${\lambda}$) and the ${\kappa}-{\varepsilon}$ models can be improved the prediction performance by changing the model constants about the recirculating flow. In addition, it was investigated for the curvature correction effect of the ${\kappa}-{\varepsilon}$ models in the recirculating flow. Overall, the curvature corrected ${\kappa}-{\varepsilon}$ models showed an excellent prediction performance.

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1114-1121
• /
• 2003

A mathematical model considering the air side and the frost layer is presented to predict the frost layer growth. The standard k-$\varepsilon$ model for the air flow and the diffusion and energy equations for the frost layer are employed. The numerical results are compared with experimental data to validate the present model, and agree well with experimental data within a maximum error of 10%. The present model predicts well the frost properties and heat and mass transfer with respect to the frosting time. The variation of total heat transfer strongly depends on the operating condition, and has a similar trend to that of the sensible heat transfer. The frost properties along the flow direction are also investigated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.509-514
• /
• 2000

A numerical study has been performed to design duct parameters in the freezer of a domestic refrigerator. The visualization results of FDM analysis using the standard k-$\varepsilon$ model with inlet boundary conditions modelled in this paper show good agreements with the experimental ones in prediction overall flow characteristics. Dominant vortex flows are found in the left upper and right lower corners, while there exists large turbulent kinetic energy around the fan and right upper side of the fan. It, in turn, has effects on the performance and noise. It is recommended to locate the outlet far away from the fan in order to reduce the noise level.