References
- Hosoda, T. and Uzuhashi, H., 1967, 'Effects of Frost on the Heat Transfer Coefficient,' Hitachi Review, Vol. 16, No. 6, pp. 254-259
- Yonko, J. D. and Sepsy, C. F., 1967, 'An Investigation of the Thermal Conductivity of Frost while Forming on a Flat Horizontal Plate,' ASHRAE Trans. Vol. 73, No. 2, pp. 1.1-1.11
- Lee, K. S., Lee, T. H., and Kim, W. S., 1994, 'Heat and Mass Transfer of Parallel Plate Heat Exchanger under Frosting Condition,' Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 6, No. 2, pp. 155-165
- Hayashi, Y., Aoki, A., Adachi, S., and Hori, K., 1977, 'Study of Frost Properties Correlating with Frost Formation Types,' J. Heat Transfer, Vol. 99, pp. 239-245 https://doi.org/10.1115/1.3450675
- Schneider, H. W., 1978, 'Equation of the Growth Rate of Frost Forming on Cooled Surfaces,' Int. J. Heat Mass Transfer, Vol. 21, pp. 1019-1024 https://doi.org/10.1016/0017-9310(78)90098-4
- Mao, Y., Besant, R. W., and Chen, H., 1999, 'Frost Characteristics and Heat Transfer on a Flat Plate under Freezer Operating Conditions: Part I, Experimentation and Correlations,' ASHRAE Trans., Vol. 105, Part. 1, No. 4295, pp. 231-251
- Jones, B. W. and Parker, J. D., 1975, 'Frost Formation with Varying Environmental Parameters,' J. Heat Transfer, Vol. 97, pp. 255-259 https://doi.org/10.1115/1.3450350
- Sami, S. M., and Duong, T., 1989, 'Mass and Heat Transfer During Frost Growth,' ASHRAE Trans., Vol. 95, Part. 1, No. 3218, pp. 158-165
- Lee, K. S., Kim. W. S., and Lee, T. H., 1997, 'A One-Dimensional Model for Frost Formation on a Cold Flat Surface,' Int. J. Heat Mass Transfer https://doi.org/10.1016/S0017-9310(97)00074-4
- Parish, H. C., and Sepsy, C. F., 1972, 'A Numerical Analysis of Frost Formation under Forced Convection,' ASHRAE Trans., No. 2331, pp. 236-251
- Sherif, S. A., Raju, S. P., Padki, M. M., and Chan, A. B., 1990, 'A Semi-Empirical Transient Method for Modeling Frost Formation on a Flat Plate,' ASME, Heat Transfer Division, Vol. 139, pp. 15-23
- Yun, R., Kim, Y., and Min, M. K., 2002, 'Modeling of Frost Growth and Frost Properties with Airflow over a Flat Plate,' Int. J. Refrigeration, Vol. 25, No. 3, pp. 362-371 https://doi.org/10.1016/S0140-7007(01)00026-3
- Le Gall, R., Grillot, J. M., and Jallut, C., 1997, 'Modeling of Frost Growth and Densification,' Int. J. Heat Mass Transfer, Vol. 40, No. 13, pp. 3177-3187 https://doi.org/10.1016/S0017-9310(96)00359-6
- Ismail, K. A. R. and Salinas, C. S., 1999, 'Modeling of Frost Formation over Parallel Cold Plates,' Int. J. Refrigeration, Vol. 22, No. 5, pp. 425-441 https://doi.org/10.1016/S0140-7007(98)00069-3
- Chen, H., Besant, R. W., and Tao, Y. X., 1999, 'Frost Characteristics and Heat Transfer on a Flat Plate under Freezer Operating Conditions: Part II,' Numerical Modeling and comparison with Data, ASHRAE Trans., Vol. 105, Part. 1, No. 4296, pp. 252-259
- Luer, A. and Beer, H., 2000, 'Frost Deposition in a Parallel Plate Channel under Laminar Flow Conditions,' Int. J. Therm. Sci., Vol. 39, pp. 85-95 https://doi.org/10.1016/S1290-0729(00)00193-8
- Patankar, S. V., 1980, Numerical Heat Transfer and Fluid Flow, Washington, DC, Hemisphere/McGraw-Hill
- Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties in Single-Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8