• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.2
• /
• pp.27-36
• /
• 2022

The large uprush could be occurred when the waves hit the coastal structure and this uprush by wave could make the overtopping. The downfall of the wave overtopping water over the structure brought about the vertical impact loads. The vertical impact loads should be evaluated in order to design the pavement behind the crown wall however these loads were still unclear. In this study, the hydraulic model tests for the downfall impact loads by wave overtopping were performed and the various conditions were applied to the tests. The effect of the incident wave condition, the freeboard, the armour crest height and the height of the parapet were investigated. The test results showed that the parapet on the crown wall could reduce the wave overtopping however the inclusion of parapet could lead to the increased downfall wave pressures behind the crown wall. The empirical formulae were proposed for evaluating the maximum downfall pressures behind the crown wall of rubble mound structure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.203-203
• /
• 2022

일반적으로 지진해일은 지진, 화산에 의한 융기 또는 침강에 따른 급작스러운 해저지각 운동에 의해 발생하며, 이에 따른 수위변동과 유체운동을 일컫는다. 그 밖에 해안/해저 산사태, 운석 낙하, 빙하 붕괴와 같이 암석, 토사, 얼음, 운석이 바다, 호수의 수면과 충돌하여 해일이 발생하기도 한다. 이 산사태 해일의 피해사례는 많지 않지만, 대부분 인명피해를 동반한다. 이에 과거부터 수리모형실험을 통해 산사태로 생성된 해일의 전파과정을 조사하는 연구들이 수행되었다. 최근에는 컴퓨터 성능향상과 다양한 수치모델이 개발됨에 따라 수치해석이 많이 수행되고 있다. 그러나 산사태 해일의 생성을 직접 모의하기 위해서는 유체-구조 상호작용(FSI; fluid-structure interaction)을 고려할 수 있는 전산유체역학(CFD; computational fluid dynamics)해석이 요구되는 관계로 활발한 연구가 진행되지 않고 있다. 본 연구에서는 FSI에 기초하여 충돌모의에 특화된 LS-DYNA를 이용하여 산사태 해일의 생성, 전파 그리고 직립벽(댐)에서의 처오름 및 파압 등을 검토한다. 그리고 낙하물의 형상, 낙하 높이에 따라 생성된 해일이 댐에 미치는 영향을 분석한다. 또한, 이용하는 LS-DYNA 해석의 타당성 및 유효성을 확인하기 위하여 기존 수리모형실험에서 생성된 산사태 지진해일과 비교·검증한다. 수치해석 결과, 동일한 체적의 낙하물에서는 폭이 좁을수록 최대파고가 낙하물에 근접해 생성되었고, 폭이 넓을수록 파장이 길어지는 것을 확인할 수 있었다. 낙하물의 낙하높이가 높을수록 산사태 지진해일의 파고가 크게 생성되었다. 낙하물로부터 600m 지점에서 설치한 댐에서의 산사태 지진해일의 처오름은 파고 및 파장이 클수록 증가하였다. 산사태 지진해일의 파압 역시 처오름에 상응하게 나타났다. 그러므로 호소에서 산사태 해일이 발생한다면, 댐 및 제방의 안정성에 영향을 미칠 수 있을 것으로 판단된다.

• The Korean Journal of Rheology
• /
• v.4 no.1
• /
• pp.25-34
• /
• 1992

저속으로 낙하하는 원통형 미소체의 유체역학적 거동에 대하여 점탄성 유체의 비 뉴우튼 성질의 영향에 관해서 연구가 수행되었다. 원통형 미소체의 직경 및 직경에 대한 길 이의 비 (Aspect Ratio)의 영향에 관해서도 또한 고찰하였으며 본 실험에서는 뉴우튼 유체 로서 99.5%의 글리세린용액과 점탄성 유체로서 1,000 wppm 의 polyacyla-mide(Separan AP-273) 수용액이 각각 사용되었다. 낙하하는 미소체의 Aspect Ratio가 증가할수록 무차원 최종속도는 뉴우튼 유체내에서 보다 점탄성 유체내에서 그증가속도가 더욱 커짐을 보였다. 뉴우튼 유체 내에서 낙하하는 원통형 미소체의 마찰저항 계수는 실험데이타로부터 계산된 값과 이론치가 비교적 잘일치하나 점탄성 유체에 관한 마찰저항 계수는 본 실험의 결과치와 무한히 긴 원통형 미소체에 대한 기존연구의 이론값과는 상당한 차이가 있음을 알수 있었 다, 이는 점탄성 유체내에서 수직으로 낙하하는 원통형 미소체의 저항계수가 k(즉 용기의 직경에 대한 미소체 직경의 비), power-law index 레이놀즈수 뿐아니라 aspect ratio를 포함 하는 새로운 관계식이 도출되어야 함을 분명히 보여주고 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.01a
• /
• pp.59-60
• /
• 2012

자유 낙하하는 물체가 받는 힘은 중력 뿐이다. 우리는 중력만을 받아서 운동하는 것을 자유 낙하 운동이라고 하고 자유 낙하하는 물체를 자유낙체라 한다. 다시 말해서, 물체의 초기 운동 상태와 무관하게 중력의 영향으로만 자유롭게 낙하하는 물체를 말하는 것이다. 본 논문에서는 공기의 저항을 무시하고, 수직방향으로 짧은 거리의 범위 내에서 고도에 의한 자유낙하 가속도의 변화가 없다는 가정을 하고, 자동차가 수직 상 방향으로 출발하여 도약하고 최고점에 도달하는 시간, 최대높이, 자동차가 출발 위치로 돌아오는 시간과 자동차의 속도, 자동차가 땅에 떨어질 때의 시간 및 속도에 대해 알 수 있다.

• Journal of The Korean Association For Science Education
• /
• v.19 no.3
• /
• pp.389-399
• /
• 1999

The purpose of this study was to identify children's mental models of the free-fall objects. This study examined children's prediction and observation about the free-fall of objects. The experimental procedure involved conducting interviews with first-, third-, fifth-, and seventh grade students. The interview had three phases: Prediction, explanation, and observation. During the prediction phase, the object pairs which varied on the dimensions of size, weight, shape, color were presented to students. The students were asked to predict what would happen if the objects were dropped simultaneously. During the explanation phase, the students were asked to explain how they arrived at their answers. During the observation phase, the students observed the free-fall of the object pairs and were asked to describe what they saw. The results showed as follows. (1) Fifth-and seventh grade students made more correct predictions than first- and third grade students. (2) The conflict problems, object pairs involving the dimensions of size and weight, were the most difficult for students to accurately predict. (3) With regard to observations, there was a non-significant effect of grade, indicating equivalence in the number of correct observations made by first-, third-, fifth-, and seventh graders. (4) The conflict problems were the most difficult for students to correctly observe. (5) First- and third grade students showed a significant difference between prediction and observation about the free-fall of objects. However. no difference was found in the fifth- and seventh grade students.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.3
• /
• pp.233-239
• /
• 2017

The CA (Control Assembly) of an SFR has a CRA(Control Rod Assembly) with an inner duct and control rod. During an emergency situation, the CRA falls into the duct of the CA for a rapid shut-down. The drop time and impact velocity of the CRA are important parameters with respect to the reactivity insertion time and the structural integrity of the CRA. The objective of this study was to investigate the dynamic behavior and integrity of the CRA owing to a drop impact. The impact analysis of the CRA under normal/abnormal drop conditions was carried out using the commercial FEM code LS-DYNA. Results of the drop impact analysis demonstrated that the CRA maintained structural integrity, and could be safely inserted into the flow hole of the damper under abnormal conditions.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.1
• /
• pp.37-44
• /
• 2015

In this paper dynamic deformation of lower hinge of refrigerator is simulated using dynamic finite element analysis while refrigerator is being dropped. The flow stress curves considering velocity dependency of hinge and lower packing material are determined through bending test and compression test at several dropping speeds. The determined material properties and flow stress from reverse engineering were used as input data for refrigerator's drop test using a dynamic finite element analysis software LS-DYNA. Additionally the result between CAE and 3D deformation measurement from real refrigerator drop test are compared and the result shows that the proposed analysis model is very useful to design lower hinge and lower packing endurable to the impulsive drop impact.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.681-688
• /
• 2021

This paper considers the trajectory and impact point dispersion analysis of the test launch vehicle (TLV). The analysis, which performed before and after its flight test on November 28, 2018, is described and verified by comparing with the flight test results. The six degree-offreedom (DOF) simulation is used to compute the dispersion of the trajectory, attitude, and impact point, where the launch vehicle performance variations and wind effects during the atmospheric phase are included. The impact area to guarantee the flight safety is determined using the results of the dispersion analysis. The flight test results confirm that the safe flight of TLV is performed within the predicted dispersion boundary.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.4
• /
• pp.341-350
• /
• 2019

Construction industry is one of the most dangerous industry. As the construction accidents occur due to the repeated factors found in each accidents, there is a limitation in analyzing all types of occupational accidents by the existing descriptive analysis and statistical test. In this study, we classified safety accidents caused by falling objects among the accident types occurring at construction sites into fatal and nonfatal accidents and deduced the factors. In addition, we deduced the association rules among the safety accidents factors caused by falling objects through the association rule analysis method among the machine learning techniques. Therefore, considering the association rules for fatal and nonfatal accidents proposed in this study, it would be possible to prevent accidents by searching for countermeasures against safety accidents caused by falling objects.

• Environmental engineer
• /
• no.6 s.262
• /
• pp.38-41
• /
• 2008