• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.631-634
• /
• 2011

항공기용 착륙장치의 완충기 충격흡수 성능은 해석 과정을 거쳐 예측한 값과 낙하시험을 수행하여 그 성능을 입증하여야 한다. 이는 미 연방 항공 규정에서 요구하고 있는 사항이다. 본 논문에서는 착륙장치 낙하시험을 위한 설비, 시험절차 및 시험방법과 낙하시험 수행 결과를 제시한다.

• Composites Research
• /
• v.26 no.2
• /
• pp.116-122
• /
• 2013

In this study, impact behavior of aluminium and glass-fiber structure is studied under low impact velocity. Compression test is carried out to investigate the compressive strength of the specimens. The degree of damage is observed using microscopy and compared with the experimental analysis data. The maximum load capacity, impact strength and elastic energy of glass-fiber honeycomb sandwich panel are more than the aluminium honeycomb sandwich panel.

• The monthly packaging world
• /
• s.361
• /
• pp.74-78
• /
• 2023

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.4
• /
• pp.365-370
• /
• 2012

International Organization for Standardization has recently published ISO 12215-5 which is the small craft-hull construction and scantling. According to ISO 12215-5 AnnexB, the scantling determination can be accomplished by drop test for craft with a length $L_H$ of 2.5m up to 6m and single-skin construction. The current method, however, of visual test has the issue where it is difficult to make an objective evaluation of ship body strength. In this study, in order to develop an evaluation system that can make a quantitative evaluation of the drop test of leisure boats, the domestic/foreign regulations on drop test of leisure boats are analyzed and the drop test evaluation system is designed, and the system applicability is reviewed through 5-meter level aluminum ship, and the issues incurred by the state of the ship and the posture while dropping were checked.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1229-1235
• /
• 2008

ELT(emergency locator transmitter) has assisted in the rescue of thousands of lives in distress. Aviators, mariners and land users being equipped with distress beacons are capable of transmitting distress signals to the satellites in emergency situations anywhere in the world. In this paper, Drop/Impact simulation was performed for ELT Body-case. FE model for Body-case was constructed with MSC/Dytran and refined using the Karas example simulation for Body-case prototype. Shock/impact survivability analysis was performed for ELT operations. FE model constructed with MSC/Nastran. Transient response analysis for refined ELT model was perfomed for ELT under impact shock loading condition.

• Journal of the Korean Society of Safety
• /
• v.6 no.2
• /
• pp.37-40
• /
• 1991

산업용 안전모는 그 기능상 耐貫通性과 衝擊吸收性이 중요하다. 이중내관통성은 별로 어려움이 없으나 충격흡수성은 무게 및 크기가 제한되고 극히 간단한 안전모의 구조에 충격을 충분히 흡수하는 Bumper작용까지 하여야 하므로 기준에 합격할수 있는 안전모를 제작하기 위하여는 여간 어려운게 아니다. 이에 論者는 일정한 무게의 추가 일정한 높이에서 자유낙하하여 안전모에 충격을 加하고서 반발할때까지의 안전모의 수직운동(변형)이 어느정도 이루어저야 하는지에 대하여 관심을 갖었다. 즉 모체든 착장체든 또는 모체와 착장체의 연결장소에서든 일정한 충격량을 받았을때 모체의정점(낙하물과 최초로 접한부분)이 수직으로 S'의 거리 만큼 움직여 주고 운동이 정지된다고 보았을때 S'과 m(추의중량), S(추가 떨어지는 높이) Fi(충격이 흡수되고 남은 충격력)와의 관계식을 뉴톤의 운동법칙으로 부터 수학적 방법으로 유도 함으로서 시험조건 및 검정 기준에 주어진 수치인 m, S, Fi,을 대입하므로서 S'을 알 수 있는바 이것을 기초로 안전모의설계및 제조된 안전모의 충격흡수 정도를 용이하게 판단 할 수있다.

• Journal of the Korean Society for Railway
• /
• v.15 no.3
• /
• pp.217-223
• /
• 2012

This study describes an experimental investigation about the impact damage characteristics of various types of high speed train window glass. Kinds of impact test standards for glass were studied and impact test considering scattering ballast were developed. Windows with external impact side made with annealed, heat strengthened and tempered glasses are likely to be broken by sharp tipped falling object. Broken shape of annealed glass is like line in part and that of heat strengthened glass is line on the whole. Tempered glass is destroyed to pieces. The change of tip type from sharp to blunt makes the higher destroyed level. Tempered glass has higher strength than annealed glass with blunt tip. When the protective films are attached to glasses, strength against destruction increases. In case of real ballast test, glasses without protective films were destroyed, but those with protective films are hard to be broken.

• Composites Research
• /
• v.26 no.3
• /
• pp.195-200
• /
• 2013

This study aims to detecting and analyzing the defects of damaged carbon fiber reinforced composites after impacts, particularly focusing on barely visible impact damages. The impact test was progressed by a drop-weight machine and applied to introduce simulated damages on laminated composites used in aircrafts. Various nondestructive testing (NDT) techniques were applied to identify the defects on the specimens with different levels of impact energies. Based on the measurements data, the levels of the barely visible impacts, and the applicability and effectiveness of the detection methods were discussed. Generally, the results demonstrated that their inner damages contained bigger footprints than those on the surfaces. However, when the damage energy was low, it was found that the inner damage size could be smaller than those appeared on the surfaces.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.11
• /
• pp.1130-1135
• /
• 2010

The main function of a landing gear is to absorb the impact energy during touchdown. Most landing gear use an oleo-pneumatic shock absorber which essentially consists of an oil damper and a gas spring. The performance of a shock absorber can be estimated by analysis but it should be verified by drop test, which is required by MIL Spec. and FAR. In the drop test, various data such as ground loads, shock absorber pressure, stroke and mass travel are analyzed to validate the shock absorbing efficiency and the mathematical model for analysis. This paper presents the introduction of drop test facility, the test procedure and data evaluation method with real drop test example.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.312-317
• /
• 1998

사용 후 핵연료 수송용기는 자유낙하 충돌사고에 대비해 양 끝단에 충격완충체를 부착하는데 이 충격완충체의 층격흡수특성은 수송용기의 구조적 안전성애 크게 영향을 미친다. 충격완충체의 층격흡수재를 감싸주는 철제 케이스와, 내부 격막판의 용접 접합부는 제작공정상 일부 부분이 부분접합 형태를 갖기 때문에 완전 접합된 부분이나 모재인 판재 부분에 비해 강도가 약하다. 따라서, 본 연구에서는 충격완충체의 부분접합부와 같은 조건의 접합상태를 고려한 용접시편의 시험을 통해서 충격완충체 케이스의 용접 접합부에 대한 접합강도와 기계적 특성을 분석하고, 접합부의 강도특성이 수송용기의 자유낙하 충돌거동에 미치는 영향을 예측하였다.