• Computational Structural Engineering
• /
• v.34 no.3
• /
• pp.27-36
• /
• 2021

본 기사에서는 낙석방지울타리의 설계 및 해석에 대하여 설명하였다. 국내에는 50kJ급의 표준 낙석방지울타리가 널리 적용되고 있지만 이보다 더 큰 낙석이 빈번하게 발생하고 있으며 상황에 따라서는 50kJ급보다 작은 낙석에너지에 저항할 수 있는 경제적인 낙석방지울타리도 필요하다. 이를 위하여 낙석방지울타리를 사면의 특성에 맞도록 설계를 하여야 하며 성능을 검증하여야 한다. 이 때 실험적 성능검증은 많은 비용과 시간이 필요함으로 해석적 접근방법을 통하여 경제적인 성능검증을 할 수 있다. 이에 낙석방지울타리에 대한 기존 해석적 연구를 소개하였으며 이와 유사한 방법을 통하여 새로운 낙석방지울타리의 설계 혹은 성능보강 시에 활용할 수 있을 것으로 기대된다.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.183-183
• /
• 2011

전 국토의 65%가 산악지형으로 이루어져 있는 우리나라는 도로개설 및 산업기지 건설, 대규모 주택단지 개발 등으로 자연사면을 변형시키는 규모나 빈도가 증가하고 있고, 최근에는 기상이변에 의한 집중호우가 빈번히 발생하여 절토사면에서 낙석이 발생할 위험이 점점 높아지고 있는 실정이다. 낙석방지를 위한 대책공법으로는 낙석방지 망, 낙석방지 울타리 등이 있으며 이중에서 낙석방지 울타리는 국내의 국도 낙석방지 대책공법 중 70% 이상을 차지하고 있다. 그러나 국내 설계지침에는 낙석방지 울타리에 대한 다양한 성능등급과 성능평가를 위한 표준화된 시험방법이 제시되어 있지 않아 현장여건을 고려하여 적절한 낙석방지 울타리를 선정하고 낙석방지 울타리들의 성능을 비교검토하기에 어려움이 있다. 유럽의 경우 유럽연합 출범이후 낙석방지 시설에 대한 통합기준의 필요성이 대두되어 유럽 여러 나라의 성능평가 방법과 스위스의 설계지침을 고려하여 2008년에 유럽 통합 지침인 ETAG 27을 제정하였다. ETAG 27에는 낙석방지 울타리의 성능등급이 100kJ~4,500kJ이상 9등급으로 분류되어 있고 성능등급 별로 Service Energy Level과 Maximum Energy Level에 대하여 실물시험을 통한 성능평가 시험과 구성요소에 대한 검증시험을 수행하도록 되어있다. 실물시험은 낙석에너지의 산정과 낙석질량의 타격위치를 정확하게 결정할 수 있는 방법을 이용하여 수행토록 규정되어 있다. 미국의 경우에는 주별로 상이한 설계기준으로 인하여 발생하는 문제를 해소하기 위하여 2003년에 스위스의 설계지침을 준용하여 통합기준인 NCHRP Report 20-07을 결정하였다. NCHRP Report 20-07에는 낙석방지 울타리의 성능등급이 100kJ~5,000kJ까지 9등급으로 분류되어 있고 성능등급 별 낙석질량이 규정되어 있으며 등급별 낙석에너지의 50%와 100%에 대하여 실물시험을 통한 성능평가 시험을 수행하도록 되어 있다. 실물시험은 낙석에너지의 산정과 낙석질량의 타격위치를 정확하게 결정할 수 있는 방법을 이용하여 수행토록 규정되어 있다. 낙석방지 울타리에 대한 국내 설계지침과 유럽과 미국의 설계지침을 비교분석하고 국내에서 수행된 실물실험을 통한 성능평가 연구결과를 검토하였다. 또한 구성요소의 역학적 특성변화가 전체 시스템의 성능에 미치는 영향을 조사하기 위해서 국내 설계 지침에 제시된 낙석방지 울타리에 대하여 컴퓨터 시뮬레이션을 이용한 성능평가를 수행하였다. 이러한 연구결과에 근거하여 국내 설계지침은 현장여건에 따라 적절한 낙석방지 울타리를 선정할 수 있도록 다양한 성능등급을 규정하고, 낙석방지 울타리의 성능을 합리적으로 비교검토 할 수 있게 하는 표준화 성능평가 시험방법과 평가기준을 정립하며, 구성요소의 품질에 대한 신뢰성을 확인하는 구성요소의 검증시험을 포함하는 방향으로 개선될 필요가 있는 것으로 조사되었다.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.4
• /
• pp.59-66
• /
• 2002

Designs for rockfall protection systems must consider rock and soil types, the angle of the slope, conditions on top and the toe of the affected area. Rockfall protection fence is installed to block for falling rock from cut slopes and this is one of the most common rockfall protection measures. The capability of the fence is provided that sum of capability of poly vinyl chloride coated wire mesh, steel support and wire rope respectively. But in some case, the rockfall protection fence was not supported rockfall energy less than total capability of the fence through the full scale rockfall tests. Therefore, the objectives of this paper are to indicate the problems of fence capability and to improve the design specifications for the fence.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.3
• /
• pp.35-45
• /
• 2005

The rockfall protection fence is one of the most common rockfall protection methods in Korea. The typical rockfall protection fence consists mainly of three parts ; H-beam supports, wire meshes, and wire ropes. The design of the rockfall protection fence is made such that the total energy absorbing capacity of the fence. Therefore, resulting from the combined energy absorbing capacity of the three parts is larger than the falling energy of rocks. In present study, a new rockfall protection fence, constructed using expanded metals instead of the existing wire rope and wire mesh for the typical type of rockfall protection fence, was evaluated on its performance by conducting both laboratory and field tests. Also, for a comparison, the same tests were performed on the typical rockfall protection fence. The test results revealed that the expanded material is an economic alternative to the existing protection materials and the expanded metal rockfall protection fence exhibits the higher energy absorbing capacity compared to that of the typical rockfall protection fence.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.5
• /
• pp.297-302
• /
• 2020

Korea has many mountainous regions, and slope collapse that can lead to damage in road facilities and loss of lives often occurs. Rockfall-protection facilities are necessary to reduce such damages. Among these facilities, the standard Korean rockfall-protection fence is designed to resist 50 kJ of rockfall impact energy. However, the range of rockfall energy significantly varies depending on the condition of the slope, and it sometimes reaches up to 100 kJ. Thus, providing several types of standardized rockfall-protection fence is necessary to address the different rockfall impact energy for efficient response to rockfalls. This paper presents a study on standardized rockfall-protection fence for various rockfall impact energy using finite-element analysis. According to the results, standardized rockfall-protection fences against rockfall impact energy of 30 and 100 kJ were proposed and have been verified.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.3
• /
• pp.5-13
• /
• 2022

In this study a test was conducted to identify weak section using 100kJ class rock energy to find out the protection performance of rockfall prevention fences in Korea. Performance rating of the rockfall protection fences is very low (48~61kJ) compared to that of foreign countries and it is necessary to determine whether it can function properly if high rock energy is generated. Furthermore, a reinforcing technology that can improve to 100kJ energy on the existing rockfall protection fences should be developed. Therefore, this study confirmed the protection performance using 100kJ rock energy in the existing rockfall protection fence system (for national road, for highway) and identified weak section of post, wire ropes and nets. Furthermore, it will be used as basic data for developing 100kJ class reinforcement technology without dismantling the existing rockfall protection fence (48-61kJ).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.49-61
• /
• 2015

This is the second of two companion papers that describe the performance assessment for flexible rockfall protection systems. Described in a companion paper is the criteria to assess the performance of flexible rockfall protection systems. In this study the performance assessment of domestic rockfall protection fences was implemented using the criteria suggested in the companion paper. It was investigated that the rockfall protection fences for express highways performed well to resist the rockfall energy of 50kJ and the deformed rockfall protection fences right after impacting would not obstruct the vehicle traffic. However, to dissipate the rockfall energy of 50kJ with the level of European standards constantly, the spacing of wireropes was adjusted to be 200mm up to the 8th wirerope from the bottom and spacing-maintainers should be extended to the 8th wirerope. It was figured out that the rockfall protection fences for general highways were required to install spacing-maintainers as those for express highways because they, which did not have spacing-maintenance members, were very prone to the penetration of rockfall even for the very small rockfall impact energies.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.1
• /
• pp.25-36
• /
• 2023

In Korea, the rockfall prevention fence is designed with 50kJ of rockfall kinetic energy in order to prevent damages such as falling rocks and landslides. In the case of rockfall kinetic energy, it is highly dependent on the shape of the slope on which it occurs. As a previous study, a fence performance evaluation was conducted for 100kJ rockfall impact energy using ETAG 27. However, previous studies have focused on newly installed rockfall prevention fences. In this study, a reinforcing materials was installed on the existing rockfall prevention fence through numerical analysis, and the structural performance of the high-strength rockfall prevention fence capable of defending against 120kJ of rockfall kinetic energy was evaluated.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.499-511
• /
• 2022

In this study, a vertical drop test was carried out to identify the performance of flexible wire rope rockfall protection fence by 100 kJ rockfall energy according to ETAG 027. The flexible wire rope, which consists of wire rope and spring. is especially enhanced the elasticity and flexibility so that it can be longer elongated when the rope is impacted by rockfall compared to original wire rope, and that results longer increase of contact time between rockfall and wire rope and increase rockfall energy absorption capability and decreases rockfall impact force. The test results shows that the plastic deformation occurred in middle post and the final deflection of the middle post was 1.15 m, which is lower than 2.0 m determined by ETAG 027. This vertical test verified the flexible wire rope rockfall protection fence can successfully absorb 102.9 kJ rockfall energy.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.12
• /
• pp.17-21
• /
• 2020

Over 60% of South Korea's land consists of mountainous topography, and recently, due to earthquakes, localized heavy rains and road development, the risks of rockfalls are getting higher. As of now, rockfall prevention facilities are being constructed in 70% of Korean roads cut slope and rockfall protections account for about 20% of them. Rockfall protection's supporting capacity is defined by combining performance of wire mesh, pillars and wire ropes. For the existing constructed rockfall protection, standards of pillars that can absorb 48~61 kJ amount of energy, wire ropes and wire mesh are presented in Guidelines for the installation and management of traffic safety facilities, Rockfall prevention facilities by Ministry of Land, Transport and Maritime Affairs (2008). However, each factor's correlation of absorption energy is not presented so it is uncertain. This study will conduct vertical drop test and identify adequacy of rockfall protection net of displacement quantity calculation factor which is delta and evaluate rockfall protection net's absorbable energy through standards of overseas performance evaluation criteria.