• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1313-1318
• /
• 2007

When the mold is cooled suddenly to reduce the time for forming work and improve the quality of jar50ml which is different highly at rib thickness by a series of various curvature radii, the poor quality of void, flow and deformation happens. The structure of spiral cooling circuit at cavity and core can control the temperature of inner and outer side sufficiently. And the system can control cooling and heating automatically. These things are applied to Jar mold. and so, the best quality and the effect of productivity improvement can be obtained.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1692-1694
• /
• 2003

펄스파워 시스템의 핵심은 스위치로서 현재까지 상당히 많은 종류가 개발되어 왔다. 이들 스위치는 구조 및 성능에 따라 장단점이 다르므로 목적에 적합한 시스템을 고려해 선택하여 사용되어 왔다. 일예로 펄스폭이 긴파형의 전류는 아크를 소화할수 있는 장치가 필요하다. 따라서 본 논문에서는 진공중의 두전극 (anode - cathode)을 나선형으로 제작하여 실험 하였다. 이방식은 결과적으로 아크를 회전시켜서 소호를 시키는 방식을 이용하였는데 전극의 수명을 연장시키는 효과를 얻을수 있었다.

• Applied Microscopy
• /
• v.33 no.4
• /
• pp.325-333
• /
• 2003

Fine structural characteristics of the heart tube and its cardiac muscle cells in spider, Araneus ventricosus are investigated by both of scanning and transmission electron microscopes. The heart tube of the spider is extended mid-dorsally along the anterior part of the abdomen, and is consisted of the thin outer layer of connective tissue (epicardium) and the thick muscle layer (myocardium). The myocardium in the spider has a typical fanlike spiral structure toward anterior part put across between the muscle fibers. Therefore, it did not give rise to the intima, and muscle cells are in direct contact to the hemolymph. The heart tube appeared to be three pairs of ostia and numerous hemocytes accumulated at the inner surface of the myocardial layer. Among several kinds of the hemocytes, the oenocytoids are the most predominant hemocytes accumulated along the myocardial folds which stretched toward heart lumen. The heart muscle cells are cross striated, branched, and multinucleated. They contain a lot of mitochondria, which provide for the continuous energy demands of the heart. Thread-like ganglion on the dorsal side of the heart tube gives off axons that innervate the heart muscle cells.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.1
• /
• pp.81-96
• /
• 2022

The purpose of this study was to examine the extent to which the contents of elementary and secondary curricula are connected and overlapped in the 'family life' area of Practical Arts(Technology & Home Economics) subjects. The procedure and results are as were like below. First, the types of criteria for analyzing curriculum contents are developed. The connectivity are classified as 'discontinuous hierarchy' and 'spiral hierarchy' and duplication are classified as 'repetition (high level of overlapping)', 'reproducing', 'deepening (intermediate level of overlapping)', 'substitution', and 'omission (low level of overlapping)'. Second, as a result of analyzing the contents of elementary and secondary curricula, the 'Human Development' area showed higher connectivity with a deepening type of duplication. The 'Safety' and the 'Lifelong Planning' concepts showed lower connectivity. Third, as a result of analyzing the achievement standards of the 2015 Curriculum, the secondary Home Economics curriculum showed a considerable increase in the level of difficulty and the volume compared to the elementary curriculum. There was low connectivity between the contents of elementary and secondary curricula in the core concepts 'Safety' and 'Lifelong Planning', an intermediate level of connectivity in 'Life Culture' and 'Management', and high connectivity in 'Development' and 'Relationship'. Also, there was a high level of duplication in the core concepts 'Safety' and 'Lifelong Planning', being classified as 'reproducing', 'substitution', and 'omission', analyzed to have low connectivity. When structuring the curriculum contents with a spiral hierarchy, one should connect the elementary and secondary school contents organically: the hierarchy with core concepts considering the different characters of constructuring knowledge in each school level, with a moderate volume, with a moderate difficulty level, with a moderate level of duplication of the contents, and with the minimum level of repetition of the same topics within the same school level.

• Composites Research
• /
• v.30 no.6
• /
• pp.331-337
• /
• 2017

The composite lattice structures have advantages of high specific stiffness and strength and are mainly applied to the structures of launch vehicles that carry the compressive load. However, since these structures are manufactured by filament winding technology, there are some defects and voids found in the knots. For these reasons, the stiffness and strength of the lattice structures have to be compared with finite element model for predicting design load. But, the full scale test is difficult because time and space are limited and the shape of structure is complex, and hence the simple and reliable test methods for examination of stiffness are needed. In this paper, subelements of composite lattice structures were prepared and compressive and bending test were conducted for examination of stiffness of helical and hoop rib. Test methods for subelements of composite lattice structures that has curved and twisted shape were supposed and compared with finite element analysis results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.12
• /
• pp.553-558
• /
• 2002

In this paper, an integrated balun using bondwire transformer is fabricated and measured. The bondwire transformer has 1ow conductor and substrate loss and kas high resonance frequency. So it is available to implement low loss broadband balun. From the measured results, 0.7 dB amplitude imbalance and about 2.5 $^{\circ}$ phase imbalance was achieved from 8.15 to 16.18 GHz. It is expected that the proposed balun can improve the performance of mixers, amplifiers and matching networks of antennas. It can also be integrated with other components due to its easier fabrication and smaller size than spiral transformer balun.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.81-91
• /
• 2002

In this paper, a high-quality integrated transformer using bondwires is proposed and fabricated. The bondwire transformer inherently has low conductor loss due to wide cross-section and small parasitic capacitance because the vertical placement of the bondwire loop separates from substrate and effectively reduces the substrate effects. It can be fabricated easily by used of the modern automatic wirebonding technology. The electrical characteristics of the fabricated transformers are compared with those of the spiral transformer It is expected that the bondwire transformer can improve the performance for RFIC and MMIC applied to a variety of application, for example, Mixer, Balanced Amplifier, VCO, and LNA.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.4 s.27
• /
• pp.261-266
• /
• 2006

In this study, a scaled model chamber was built to investigate ventilation characteristics of the hood room in LNG carrier. Experimental study was performed in model by visualization equipment with laser apparatus. Four different kinds of measuring area were selected as experimental condition Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system and its software adopting two-frame grey-level cross correlation algorithm. The flow pattern reveals the large scale counter-clockwise forced-vortex rotation at center area.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.176-176
• /
• 2011

경사 코팅법은 증발 물질이 기판에 수직으로 입사하는 기존 코팅방법과 다르게 증발물질이 기판과 $90^{\circ}$ 이하의 경사각으로 입사하도록 하여 코팅하는 방법이다. 이러한 경사 코팅법은 각도를 달리함으로 인해 비스듬한 기둥, 나선형, C-형, S-형, zigzag 구조 등의 정교하고 폭넓은 박막을 형성 할 수 있다. 이러한 경사 코팅법은 경사굴절 광학필터, 선형 편광 등의 광 산업계에서 널리 사용되고 있다. 본 연구에서는 경사 코팅법을 이용하여 마그네트론 스퍼터링법으로 Al 박막을 제조하였고 다양한 경사 각도에 따른 조직의 특성과 내식성 등을 평가하고 비교하였다. 기판을 $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $90^{\circ}$의 다양한 각도로 위치시켜 냉연강판 및 Si 웨이퍼에 단일층 또는 다층으로 Al 박막을 코팅하였다. 박막의 구조를 확인하기 위해 전자현미경(SEM)을 사용하였으며 기판의 위치에 따른 변화를 관찰하기 위해 시편을 좌, 우, 중간으로 구분하여 분석하였다. Al 박막이 단층일 경우 회전각도 $60^{\circ}$에서 치밀한 조직이 관찰되었으며 이것은 표면의 반사도와 표면조도 결과와도 유사하게 나타났다. 다층 박막에서는 회전각도 $45^{\circ}$에서 아주 치밀한 조직이 나타났으며, $3{\mu}m$ 두께로 코팅한 시편의 염수분무 시험 결과 120시간 경과 후에도 적청이 발생하지 않았다. 이것은 기존의 방법이 약 72시간에서 적청이 발생하는 것과 비교할 때 경사 코팅법으로 코팅된 시편의 내식성이 현저히 향상됨을 나타낸다. 따라서 반응성이 높고 쉽게 산화가 일어나는 철강제품의 부식 방지를 위해 경사 코팅법으로 Al 박막을 제조한다면 치밀한 조직으로 인해 얇은 두께에서도 부식이 발생하는 시간을 연장시켜 제품의 내구수명을 연장시킬 수 있을 것으로 기대된다.

• Korean Journal of Crystallography
• /
• v.6 no.2
• /
• pp.63-68
• /
• 1995

The crystal structure of fenothiocarb(S-4-phenoxybutyl dimethylthiocarbamate), C13H19NO2S is monoclinic, space group P21/c, a=9.045(1)Å, b=14.577(2)Å, c=10.727(2)Å, β=103.56(1)°, Z=4, V=1375.20(6)Å3, Dc=1.23g/cm3, λ(Mo-Kα)=0.71069Å, μ=2.3cm-1, F(000)=544, temperature : 293±3K, R=0.049 for 1543 unique observed reflections. The structure was determined by direct method and refined by full-matrix least squares method. The molecules are contacted to the c axis with two fold screw and van der Waales force.