• The Journal of the Acoustical Society of Korea
• /
• v.9 no.3
• /
• pp.31-41
• /
• 1990

It is difficult to detect such flaws as stress-corrosion cracking or corrossion wastage(loss of bolt diameter) in the threads. In many cases the critical size of a flaw is very small(1-2mm order). This paper describes how it is possible to discriminate small flaw indications in threads using the time difference of thread signals [TDTS] by a signal-conditioning technique.

• 대한치과보철학회:학술대회논문집
• /
• 1999.11a
• /
• pp.49-50
• /
• 1999

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.6
• /
• pp.503-507
• /
• 2015

In this study, we compare the performance of the screw through the Clamping force of the test materials to change shape and structure, one of the ways to maintain and improve the engaging force to cope with the miniaturization of the fastener threads are further thinner and lighter precision way that can improve the fastening force of the screw results were as follows. The clamping force according to the materials was $7.57N{\cdot}cm$ in SUS XM7 and SWCH18A was $5.97N{\cdot}cm$. This result was to be found to average 13.5% high in the Clamping force of SUS XM7 materials. In the case of the clamping force of the screw thread shape change, the clamping force of symmetrical and asymmetrical thread was $6.78N{\cdot}cm$ and $7.57N{\cdot}cm$. The clamping force of the asymmetrical thread showed an average high of 11.6%.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.839-846
• /
• 2014

Recent trends in the miniaturization and weight reduction of portable electronic parts have driven the use of subminiature screws with a micrometer-scale pitch. As both screw length and pitch decrease in subminiature screws, the resulting clamping force becomes diminishes. In this work, Finite element (FE) analysis is performed to evaluate clamping force of a screw assembly, with a comparison with experimental result. To improve clamping force of subminiature screws, a new screw design is considered by modifying screw thread angle: the thread angle is varied as an asymmetric way unlike the conventional symmetric thread angle. FE analyses are then performed to compare the clamping characteristics of each subminiature screw with different thread angle. The effect of thread angles on the clamping force is then discussed in terms of structural safety for both positive and negative screws.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.87-93
• /
• 2014

A tightened coupler with two way-threading is suggested to overcome the previous one-way threaded coupler. The experiment and a mock-up test were conducted to analyze the constructability of the suggested coupler. The aim of the mock-up test was to assemble the suggested coupler in horizontal rebar of mat footing and vertical rebar of semi-fabricated column bars. The method using the suggested coupler in semi-fabricated column bars is developed by analyzing the problem of fabricated column bars using the one-way threaded coupler. The result of the mock-up test showed that the time required to assemble the suggested coupler in the horizontal bars is shorter than it is for the one-way threaded coupler. In addition, the method using the suggested coupler in semi-fabricated column bars has advantages such as lower working loads, supporting safe work and strongly tightening the rebar. From these results, it is revealed that the suggested coupler is adequate to use in rebar work in terms of cost, quality and time.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.66-71
• /
• 2005

In this study the regression rate of hybrid rocket fuel has been investigated by two methods. First method is to use swirl injectors for enhancement of regression rate. And second method is the modification of the helical grain deriving improvement of combustion area and generating swirl flow. Tests have been done with PMMA and gaseous oxygen. In this paper the incline angle of the helical grain was varied to find the optimal condition to obtain the max regression rate for a given operational condition.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.232-236
• /
• 2006

하이브리드 로켓에서 그레인 전체 부분에서 고른 연소율 향상을 이룰 수 있는 방법으로 스월 유동과 나사산 그레인을 동시에 적용하여 실험을 실시하였다. 그 결과 입구부분과 연료 후반부에 집중된 연소현상을 확인하였다. 스월 유동은 스월 유동의 종류에 상관없이 일정한 감소율을 나타낸다. 그리고 연소율 향상은 연료 벽면에서의 회전 유동 강도에 비례한다고 가정 할 수 있다. 따라서 입구부분의 집중된 연소현상을 해소하고 일정한 연소율 향상을 이룰 수 있는 스월 유동 조건에 대해 연구하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.375-382
• /
• 2015

The dome and neck part of a vessel is generally formed by a hot spinning process with a seamless tube. However, as studies on and design data from the hot spinning process are insufficient, this process has been performed based on trial and error and the experiences of field engineers. Changes in the inner diameter from the bottom to the top of the neck have occurred mainly because of the characteristics of the hot spinning process due to the high-speed rotation of the rollers. In this study, a theoretical and finite element analysis of the vessel is conducted with different material(Cr-13)-supplemented screw threads for tapping and to reduce shape errors. Based on the results, tne structural safety under the operating conditions is evaluated.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.531-542
• /
• 2022

As buildings become taller, the strength of structural materials must increase and the amount of rebar reinforcement also increases while the application of an appropriate rebar splice method in the construction process become one of the essential factors. In this research, the current status of quality check for rebar coupler is identified by an expert questionnaire and an appropriate quality check method is proposed through a quality test on specimens similar to actual on-site construction. In the test results, it was revealed that, among the quality check methods for rebar coupler joints, the coupler tightening method and face to face degree of between upper and lower rebar did not affect the strength the specimen. Therefore, it is considered to be an appropriate way to check the coupler quality check to check whether the threads are completely assembled during on-site construction through manufacture the number of threads of rebar and coupler with a margin beyond the calculated thread number.

• 월간 기계설비
• /
• s.288
• /
• pp.75-80
• /
• 2014

나사식 가단주철제 관이음쇠는 신한메탈, 영화테크(전신 영화금속) 외 국산 8개사, 중국산 9개사 등 모두 17개사가 공급에 참여하고 있다. 그러나 심한 가격경쟁으로 짝퉁과 중국산 제품이 판치는 시장에서 100% 국내 가공으로 최고의 품질을 자랑하며 고객과 신뢰를 쌓아가기란 여간 어렵지 않다. 나사식 가단주철제 관이음쇠 분야의 명품을 꼽으라면 설비건설업계는 대부분 다이아몬드가 표시된 제품을 집는다. 다이아몬드 표시로 더 알려진 관이음쇠 생산업체인 (주)신한메탈(대표 전진화)은 작년에 영화금속의 나사식 관이음쇠 부문을 인수한 후 경쟁력을 더욱 강화한데 이어 최근에는 엘보, 티 등 스테인리스 조인트 가공시장에 본격 진출하기 위해 생산시설 도입에 박차를 가하고 있다.