• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.183.2-183.2
• /
• 2013

저항이 낮고 투과도가 일정한 투명전도막(TCF)의 내구성을 향상 및 유지 시키는 연구는 상업화에 가장 필요한 연구 분야이다. 그 중 탄소나노튜브(CNT)와 실버나노와이어(AgNW)를 섞어 만든 CNT-AgNW는 우수한 광투과성과 내화학성 및 균일한 전기 전도성을 갖고 있고 그 기반의 투명전도막은 기존의 ITO 및 CNT 박막보다 우수한 유연성을 갖기 때문에 차세대 플렉시블 디스플레이 소재로서 많은 관심을 모으고 있다. 본 연구는 PET를 이용한 CNT-AgNW로 제작된 투명전도막 위에 물성 및 두께 따른 하드오버 코팅을 통한 내구성 개선 및 유지를 연구하였다. 하드오버 코팅 물질로는 실로콘계 하이브리드 투명 하드코팅 소재를 기본으로 하고 용매 및 용질의 합성 온도를 제어하고 코팅막의 두께(Thin, Thick)를 조절을 통해 내구성 개선을 증진시키려 하였다. 연구결과 물성 향상에 가장 많은 영향을 끼치는 것은 CNT-AgNW 코팅층과 하드오버 코팅층과의 젖음성으로, 그 젖음성이 증가할수록 투과도 및 전기전도도가 향상되는 것을 관찰하였다. 분석 결과, 용매의 비점 및 비중, 용질의 합성 온도가 하드오버코팅 젖음성에 가장 많은 영향을 주는 것을 확인하였다. 또한 항온 항습($85^{\circ}C/85%$) 환경에서 240시간 이상 내구성 테스트 결과 하드오버코팅 물질 중 고온합성 및 고비점 용매를 이용하고 thick 조건이 Thin조건보다 투명전도성 평가 지수(${\sigma}DC/{\sigma}OP$)가 향상 되었다. 또한 Thin에서 면저항(${\Omega}/{\square}$) 변화율이 10% 이상을 보인 반면, Thick에서는 10% 이내의 변화율 유지를 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제31권3호
• /
• pp.42-49
• /
• 2024

전자기파 차폐 소재의 시장에서는 고주파 대역에서의 뛰어난 차폐 성능과 함께 유연성과 내구성이 중요한 요구사항으로 부각되고 있다. 특히 전자기파 간섭 문제를 해결하기 위해 고성능 EMI 필름의 필요성이 커지고 있으며, 이는 스마트 전자기기, 자동차 전장 시스템, 통신 장비 등 다양한 산업 분야에서 더욱 중요해지고 있다. 본 연구에서는 트라이모달 실버 페이스트를 개발하고 EMI 필름으로 제작하여 그 성능을 평가하였다. 개발된 실버 페이스트는 변성 에폭시 바인더를 사용하여 스크린 인쇄 공정에 적합한 물성을 갖추었으며, 5G 영역의 고주파 대역(26.5 GHz ~ 40 GHz)에서 차폐 성능이 평균 -99 dB로 우수함을 확인하였다. 특히 33.6 GHz에서 -90.3 dB의 차폐 효과를 보였다. 유연성 및 내구성 테스트 결과, 곡률반경 1 mm에서도 필름의 유연성을 유지하며 벤딩 사이클 시험에서 outer 벤딩의 경우 초기 저항이 0.51 Ω에서 10,000 사이클 후 0.64 Ω로 약 25.5% 증가하였고, inner 벤딩에서는 약 3.6% 감소하여 압축 응력에 대한 저항 감소를 확인하였다.

• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.578-583
• /
• 2013

The lighting devices using organic light emitting diodes (OLEDs) are actively researched because of the various advantages such as high power efficiency and 2-dimensitonal lighting emitting. To commercialize those OLED lighting devices, the manufacturing cost must be downed to comparable price with conventional light sources. Here, we demonstrate a reverse gravure-offset or gravure off-set printed metal electrode for the auxiliary electrode for OLED lighting devices. For the fabricated OLED's auxiliary electrode, we used Ag nano-paste and printed metal grid structure with a line width and spacing of several ten and hundred micrometer by using gravure-offset printing. In the end the printing metal grid pattern are successfully achieved by optimization of various experimental conditions such as printing pressure, printing speed and printing delay time.

• 한국의류산업학회지
• /
• 제12권6호
• /
• pp.837-842
• /
• 2010

This study examines the dyeability, light fastness, washing fastness, and antibacterial activity of chitosan and nano silver composite knit fabrics dyed with extracted solution from Chrysanthemum Indicum Linn. The results show that ${\Delta}E$ values of chitosan and nano silver composite knit fabrics were higher than cotton 100% knit fabrics in dyed condition with extracted solution from Chrysanthemum Indicum Linn, and mordant treatments influenced the chrominance change. Chrysanthemum indicum Linn confirmed that this could be a polygenetic colors. ${\Delta}E$ values of post-mordant treatments knit fabrics were higher than pre-mordant treatments knit fabrics in dyed condition with extracted solution from Chrysanthemum Indicum Linn., and mordant treatments method influenced the chrominance change. The dyeability of chitosan and nano silver composite knit fabrics was increased by mordant treatment. The fastness of the chitosan and nano silver composite knit fabrics was better than cotton 100% knit fabrics. In the result of antibacterial activity, the bacterial reduction rate of chitosan and nano silver composite knit fabrics was 99.9% to Staphylococcus aureus and Klebsiella pneumoniae.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.104-105
• /
• 2007

In this study, characteristics of silver ink-jet printing were investigated under various substrate treatments such as substrate heating, hydrophobic coating, and ultraviolet(UV)/ozone soaking. Fluorocarbon(FC) film was spin-coated on the polyimide (PI) film substrate to obtain a hydrophobic surface. Although hydrophobicity of the FC film could reduce the diameter of the printed droplets, the singlet images printed on the FC film surface showed irregularities in the pattern size and the position of the printed droplet along with droplet merging phenomenon. The proposed UV/ozone soaking of the FC film improved the uniformity of the pattern size and the droplet position after printing and substrate heating was very effective way in preventing droplet merging. By heating of the substrate after UV/ozone soaking of the coated FC film, silver conductive lines of 78-116 ${\mu}m$ line were successfully printed at low substrate temperatures of $40^{\circ}C$.

• 한국의류학회지
• /
• 제29권7호
• /
• pp.918-925
• /
• 2005

The following are the results from the infrared body temperature image test to verify the changes in facial temperature according to call duration with a cellular phone. As for the body temperatures, it appears to be the mean value at the upper central point of phone's battery among 7 different points that are measured, and to be the highest at srernocleido-mastoid and scapular trapezius muscle triangle zone$(34.25^{\circ}C\; and\;34.05^{\circ}C\;each)$. The changes of body temperature according to the time duration shows that the body temperature rises according to the length of phone use because of the heat emitted from the battery. As for the temperature changes according to blocking materials, the one without processing appears to be higher in the mean temperature compared to the others that are processed, NSS(Nano Silver Silk) and NSG(Nano Silver Silk Gold) appear to be the lowest in the temperature to show the best blocking property. As for the temperature changes according to measuring points, it appears to be the highest at P4, P5 with all materials, and one with NSG to be the lowest at Pl, P2, P3, and one with NSS to be the lowest at P3, P4, P5, P6, which is due to the thermal conduction of Au and Ag. And the mean temperature at each point appears to be different according to the materials. Therefore, the study conducted with human participants requires a proper particle size of it which would not penetrate cellular tissues and a proper binder and binding treatment for it, to prevent the physical fatigues and the potential diseases. However, it is highly required for back-up researches to verify various aspects in applying nano silver to textile products.

• 한국분말재료학회지
• /
• 제24권6호
• /
• pp.464-471
• /
• 2017

A metal mesh TCE film is fabricated using a series of processes such as UV imprinting of a transparent trench pattern (with a width of $2-5{\mu}m$) onto a PET film, filling it with silver paste, wiping of the surface, and heat-curing the silver paste. In this work nanosized (40-50 nm) silver particles are synthesized and mixed with submicron (250-300 nm)-sized silver particles to prepare silver paste for the fabrication of metal mesh-type TCE films. The filling of these silver pastes into the patterned trench layer is examined using a specially designed filling machine and the rheological testing of the silver pastes. The wiping of the trench layer surface to remove any residual silver paste or particles is tested with various mixture solvents, and ethyl cellosolve acetate (ECA):DI water = 90:10 wt% is found to give the best result. The silver paste with 40-50 nm Ag:250-300 nm Ag in a 10:90 wt% mixture gives the highest electrical conductance. The metal mesh TCE film obtained with this silver paste in an optimized process exhibits a light transmittance of 90.4% and haze at 1.2%, which is suitable for TSP application.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.1-4
• /
• 2009

Mechanical and electrical properties of silver stabilizer layer of coated conductor, which as prepared with nano silver paste as starting materials, have been investigated, Nano silver paste was coated on a YBCO film by dip coating process at a diping speed of 20m/min. Coated film was dried in air and heat treated at $400{\sim}700^{\circ}C$ in an oxygen atmosphere. Adhesion strength between YBCO and silver layer was measured by a tape est(ASTM D 3359). Hardness and electrical conductivity of the samples were measured by pencil hardness test (ASTM D 3363) and volume resistance test by LORESTA-GP (MITSHUBISHD, respectively. The sample heat-treated at $500^{\circ}C$ showed poor adhesion 1B, but samples heat treated at higher than $600^{\circ}C$ showed enhanced adhesion of 5B. The silver layer heat-treated at $700^{\circ}C$ showed the high hardness value larger than 9 H, low volume resistance, surface resistance value as well as superior current carrying capacity compared to sputtered silver. SEM observations showed that a dense silver layer was formed with a thickness of about $2{\mu}m$. Dip coated silver layer prepared by using nano silver paste showed superior electrical and mechanical characteristics.

• Journal of Oral Medicine and Pain
• /
• 제34권1호
• /
• pp.39-48
• /
• 2009

본 연구는 구취생성의 주요 원인균에 대한 nanosilver의 항균효과를 조사하기 위해서 시행되었으며, 이와 더불어 이들 세균의 증식 조건도 함께 연구하였다. 포항공과대학교 나노기술센터로부터 $NANOVER^{TM}$, WA 1000 현탁액을 제공 받아 희석하여 사용하였으며, 공시균으로는 주요 구취생성균으로 알려진 Fusobacterium nucleatum (KCTC 2640), Prevotella melaninogenica (KCTC 3689), Klebsiella pneumonia (KCTC 1560) 3종의 세균류를 한국생명공학연구원 생명자원센터로부터 구입하여 사용하였다. 공시균의 배양에 혐기성세균 배양에 이용되는 tryptone- yeast extract-ammonium acetate(TYA) 배지와 chopped beef meat(CBM) 배지를 이용하였다. 1. 최적배양조건으로 감압배양, CBM 배지가 적당한 것으로 나타났다. 2. 간균인 K. pneumonia에 Nanover(5 및 10 ppm)를 처리하고 주사형 전자현미경으로 균체의 형태를 관찰한 결과는 세균의 생장점 부근에서 세포벽에 손상을 주어 세포벽을 절단하여 다량의 막상 편린을 생성하고 autolysin을 불활성화 시켜 filament형 균체를 형성하여 균의 증식은 일시적으로 억제시킬 수 있었으나 완전히 사멸시키지는 못하였으며, 구취 세균을 전혀 다른 형태로 변화시키는 것으로 나타났다. 그러나 항균제로서의 역할은 가진 것으로 확인되었다.