• Progress in Medical Physics
• /
• v.10 no.1
• /
• pp.1-7
• /
• 1999

In this study, the dose distributions of a $^{32}$ p uniform cylindrical volume source and a surface source, a pure $\beta$emitter, were calculated in order to obtain information relevant to the utilization of a balloon catheter and a radioactive stent. The dose distributions of $^{32}$ p were calculated by means of the EGS4 code system. The sources are considered to be distributed uniformly in the volume and on the surface in the form of a cylinder with a radius of 1.5 mm and length of 20 mm. The energy of $\beta$particles emitted is chosen at random in the $\beta$ energy spectrum evaluated by the solution of the Dirac equation for the Coulomb potential. Liquid water is used to simulate the particle transport in the human body. The dose rates in a target at a 0.5mm radial distance from the surface of cylindrical volume and surface source are 12.133 cGy/s per GBq (0.449 cGy/s per mCi, uncertainty: 1.51%) and 24.732 cGy/s per GBq (0.915 cGy/s per mCi, uncertainty: 1.01%), respectively. The dose rates in the two sources decrease with distance in both radial and axial direction. On the basis of the above results, the determined initial activities were 29.69 mCi and 1.2278 $\mu$Ci for the balloon catheter and the radioactive stent using $^{32}$ P isotope, respectively. The total absorbed dose for optimal therapeutic regimen is considered to be 20 Gy and the treatment time in the case of the balloon catheter is less than 3 min. Absorbed doses in targets placed in a radial direction for the two sources were also calculated when it expressed initial activity in a 1 mCi/ml volume activity density for the cylindrical volume source and a 0.1 mCi/cm$^2$ area activity density for the surface source. The absorbed dose distribution around the $^{32}$ P cylindrical source with different size can be easily calculated using our results when the volume activity density and area activity density for the source are known.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.271-282
• /
• 2012

We explore the effect of removal of organic ligand on the atomic configurations around oxygen in hydroxyl groups in amorphous silica gel (synthesized through hydrolysis of $SiCl_4$ in diethyl-ether) using high resolution $^{17}O$ solid state NMR spectroscopy. $^1H$ and $^{29}Si$ MAS NMR spectra for amorphous silica gel showed diverse hydrogen environments including water, hydroxyl groups (e.g., hydrogen bonded silanol, isolated silanol), and organic ligands (e.g., alkyl chain) that may interact with surface hydroxyls in the amorphous silica gel, for instance, forming silica-organic ligand complex (e.g., Si-$O{\cdots}R$). These physically and chemically adsorbed organic ligands were partly removed by ultrasonic cleaning under ethanol and distilled water for 1 hour. Whereas $^{17}O$ MAS NMR spectra with short pulse length ($0.175{\mu}s$) at 9.4 T and 14.1 T for as-synthesized amorphous silica gel showed the unresolved peak for Si-O-Si and Si-OH structures, the $^{17}O$ MAS NMR spectra with long pulse length ($2{\mu}s$) showed the additional peak at ~0 ppm. The peak at ~0 ppm may be due to Si-OH structure with very fast relaxation rate as coupled to liquid water molecules or organic ligands on the surface of amorphous silica gel. The observation of the peak at ~0 ppm in $^{17}O$ MAS NMR spectra for amorphous silica gel became more significant as the organic ligands were removed. These results indicate that the organic ligands on the surface of amorphous silica gel interact with oxygen atoms in Si-OH and provide the information about atomic structure of silanol and siloxane in amorphous silica gel. The current results could enhance the understanding of dehydration mechanism of diverse silicates, which is known as atomic scale origins of intermediate depth (approximately, 70~300 km) earthquakes in subduction zone.

• Journal of Korean Society of Forest Science
• /
• v.69 no.1
• /
• pp.56-68
• /
• 1985

This study was conducted (1) to measure the nitrogen content of various parts of trees in a 24-year-old Pinus koraiensis plantation, providing a harvest method with the least impact on the self-serving mechanisms in the nitrogen status of the ecosystem and (2) to examine the seasonal changes in inorganic nitrogen (ammonium salt and nitrate, separately) at various soil depths and to study the self-serving mechanisms for nitrogen at the ecosystem, providing an appropriate method and season for the application of nitrogen fertilizers. The results obtained in this study were as follows; 1) Of the total nitrogen content of the total tree biomass (except for roots), nearly 61.5% was distributed in the needles, 20% in the branches, 5.5% in the stem bark, and 13% in the stem wood. Therefore, the harvest method of removing only wood parts for pulpwood production has little impact on the self-serving mechanisms of the site's nitrogen status. 2) Inorganic nitrogen concentrations decreased with increasing soil depths. The seasonal average concentration of inorganic nitrogen was highest in early spring and decreased in the following descending order; autumn, tollowed by mid-summer, and early summer. This pattern resulted from the fact that the loss of nitrate was greatly influenced by environmental factors. Thus, it was suggested that an application of active nitrogen fertilizer would be appropriate in spring.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.1-5
• /
• 2006

Purpose: IMRT quality assurance(Q.A) is consist of the absolute dosimetry using ionization chamber and relative dosimetry using the film. We have in general used 0.015 cc ionization chamber, because small size and measure the point dose. But this ionization chamber is too small to give an accurate measurement value. In this study, we have examined the degree of calculated to measured dose difference in intensity modulated radiotherapy(IMRT) based on the observed/expected ratio using various kinds of ion chambers, which were used for absolute dosimetry. Materials and Methods: we peformed the 6 cases of IMRT sliding-window method for head and neck cases. Radiation was delivered by using a Clinac 21EX unit(Varian, USA) generating a 6 MV x-ray beam, which is equipped with an integrated multileaf collimator. The dose rate for IMRT treatment is set to 300 MU/min. The ion chamber was located 5cm below the surface of phantom giving 100cm as a source-axis distance(SAD). The various types of ion chambers were used including 0.015cc(pin point type 31014, PTW. Germany), 0.125 cc(micro type 31002, PTW, Germany) and 0.6 cc(famer type 30002, PTW, Germany). The measurement point was carefully chosen to be located at low-gradient area. Results: The experimental results show that the average differences between plan value and measured value are ${\pm}0.91%$ for 0.015 cc pin point chamber, ${\pm}0.52%$ for 0.125 cc micro type chamber and ${\pm}0.76%$ for farmer type 0.6cc chamber. The 0.125 cc micro type chamber is appropriate size for dose measure in IMRT. Conclusion: IMRT Q.A is the important procedure. Based on the various types of ion chamber measurements, we have demonstrated that the dose discrepancy between calculated dose distribution and measured dose distribution for IMRT plans is dependent on the size of ion chambers. The reason is small size ionization chamber have the high signal-to-noise ratio and big size ionization chamber is not located accurate measurement point. Therefore our results suggest the 0.125 cc farmer type chamber is appropriate size for dose measure in IMRT.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.3
• /
• pp.159-165
• /
• 1997

This paper presents the optimum dimension of 89 ton class stow-net vessel with stern-fishing. The model of basic design is developed by using the optimization techniques referring to objective function and numerous constraints as follows; speed, fishing quantity, fishing days, catch per unit effort(CPUE), and weight/ratio of main dimensions, etc. Thus, the basic design of stow-net fishing vessel is built up by using the optimization of the design variables called the economic optimization criteria, and the objective function represents the criterion which is cost benefit ratio(CBR). The main conclusions are as follows. 1. S/W for decision of optimum hull size is developed in 89 ton class stow-net fishing vessel which is constructed with optimization of the design variables called the economic optimization criteria. 2. For optimum ship dimensions in 89 ton class stow-net fishing vessel, the hull dimensions can be obtained in the range of L= 27.3m, B = 6.6m, D = 2.80m, Cb = 0.695, T/D = 0.80, $\Delta$(displacement)=281.7ton with 10 knots.

• Journal of Gifted/Talented Education
• /
• v.21 no.1
• /
• pp.57-81
• /
• 2011

The purpose of this study was to explore the quality of life of musically talented students as measured by their external experiences (e.g., activities, companions) and internal experiences (e.g., flow, emotion). The participants in this study were 33 musically talented students (10 males, 23 females) aged 13 to 19. Study data were collected for 7 consecutive days using the Experience Sampling Method (ESM), which employs a cellular-phone as a signaling device. The results were as follows: First, in response to the 1625 random signals, musically talented students reported that 40.9% of their time was spent on productive activities. An additional 33.4% of time was used for maintenance activities and the rest of their time was spent on leisure/social activities. Also, musically talented students reported that 48.5% of their time was spent alone. When they were alone, they spent a lot of time engaging in productive activities (44.3%). Second, in order to measure the flow of their life, two methods were used. One used a 4-channel flow model (i.e. apathy, boredom, flow, anxiety) and the other used 8 dimensions and conditions of the flow experience (i.e. concentration, self-consciousness disappears, action and awareness merge, distorted sense of time, freedom from worry about failure, clear goals, immediate feedback, balance between challenges and skills). According to the former, when engaged in music-related activities, musically talented students usually reported flow (54.0%), while they felt apathy (41.3%) for daily routines activities. According to the latter method, musically talented students experienced flow for most productive activities, while they experienced flow least for maintenance activities. Emotional variables of ESF are comprised of 10 semantic scales (i.e. happy-sad, strong-weak, active-passive, sociablelonely, proud-ashamed, involved-detached, excited-bored, clear-confused, relaxed-worried, cooperative-competitive). Musically talented students reported experiencing the most positive emotion for social activities and experiencing the most negative emotion for maintenance activities. Results of this study assert that musically talented students had to trade off immediate enjoyment for developing their special gifts. They could not afford as much time for socializing with friends, and they had to spend more time alone compared to their peers without such gifts. Consequently, they were found to deprive themselves of the spontaneous good times that teenagers usually thrive on. They were helped in this respect by their autotelic personality traits, especially their strong need for achievement and endurance. The downside, however, is that the moment-to-moment quality of their moods suffered. The argument concerning musically talented students applies for all adolescents. The choices that talented students must make between immediate gratification and long-term development, and between solitude and companionship, are the same choices every young person must make, regardless of her or his level of talent. All of us have gifts that are potentially useful and worthy of being appreciated. But to develop these latent talents we must cultivate them, and this takes time and the investment of mental energy. The lifestyle that musically talented students develop can show us some of the choices all of us must make in order to cultivate our gifts.

• Management & Information Systems Review
• /
• v.36 no.2
• /
• pp.277-306
• /
• 2017

Most past studies on the Critical Success Factors of Company Informatization focused on the completeness of Informatization and its financial effect, and there have not been enough studies on whether a company's management strategies can be supported by establishing Informatization direction. This implies that there must be verification on the followings; whether Informatization focuses on steering the implementation of management strategies, what correlation there are between major mechanism factors and Informatization performance. This also implies that there must be a new study to re-interpret the existing success factors of Informatization into strategic management paradigm. The purpose of this study is to empirically verify the influence of subject, environment, resource, and mechanism factors on informatization achievement, and to analyze the differences in influence of informatization success factors on informatization achievement depending on domestic large corporations and SMEs. This study presented the verification results for seven research hypotheses. It was confirmed through empirical analysis that securing resource factor was significant in informatization performance and that all sub-factors of learning mechanism and coordination mechanism were also significant in enterprise informatization achievement. In addition, it was confirmed through the control effect analysis depending on enterprise size that the differences in informatization performance of large corporations and SMEs are due to support environment factor, learning mechanism, and selection mechanism. The implications of this study are as follows: First, the significance of mechanism factors such as learning, internal coordination, and external coordination are relatively higher than other factors in informatization achievement. Secondly, informatization success factors that SMEs must focus on achieving are presented by analyzing the differences on informatization achievement of large corporations and SMEs. Third, since empirical research for informatization success mechanism factors not covered empirically in the prior research was directly progressed, it is thought that it could provide a comprehensive understanding for mechanism factors. In addition, this study is thought to provide a practical contribution that can be applied to other industrial areas and enterprises.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.69-74
• /
• 2010

Purpose: The purpose of this study was to analyze the influence of palatal height on Korean vowels and speech intelligibility in Korean adults and to produce baseline data for future prosthodontic treatment. Material and methods: Forty one healthy Korean men and women who had no problem in pronunciation, hearing, and communication and had no history of airway disease participated in this study. Subjects were classified into H, M, and L groups after clinical determination of palatal height with study casts. Seven Korean vowels were used as sample vowels and subjects'clear speech sounds were recorded using Multispeech software program on computer. The F1 and the F2 of 3 groups were produced and they were compared. In addition, the vowel working spaces of 3 groups by /a/, /i/, and /u/ corner vowels were obtained and their areas were compared. Kruskal-Wallis test and Mann-Whiteny U test were used as statistical methods and P < .05 was considered statistically significant. Results: There were no significant differences in formant frequencies among 3 groups except for the F2 formant frequency between H and L group (P = .003). In the analysis of vowel working space areas of 3 groups, the vowel working spaces of 3 groups were similar in shape and no significant differences of their areas were found. Conclusion: The palatal height did not affect vowel frequencies in most of the vowels and speech intelligibility. The dynamics of tongue activity seems to compensate the morphological difference.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.3
• /
• pp.375-388
• /
• 2019

Accurate evaluation of sea-to-air $CO_2$ flux and its variability is crucial information to the understanding of global carbon cycle and the prediction of atmospheric $CO_2$ concentration. $fCO_2$ observations are sparse in space and time in the East Sea. In this study, we derived high resolution time series of surface $fCO_2$ values in the southwest East Sea, by feeding sea surface temperature (SST), salinity (SSS), chlorophyll-a (CHL), and mixed layer depth (MLD) values, from either satellite-observations or numerical model outputs, to three machine learning models. The root mean square error of the best performing model, a Random Forest (RF) model, was $7.1{\mu}atm$. Important parameters in predicting $fCO_2$ in the RF model were SST and SSS along with time information; CHL and MLD were much less important than the other parameters. The net $CO_2$ flux in the southwest East Sea, calculated from the $fCO_2$ predicted by the RF model, was $-0.76{\pm}1.15mol\;m^{-2}yr^{-1}$, close to the lower bound of the previous estimates in the range of $-0.66{\sim}-2.47mol\;m^{-2}yr^{-1}$. The time series of $fCO_2$ predicted by the RF model showed a significant variation even in a short time interval of a week. For accurate evaluation of the $CO_2$ flux in the Ulleung Basin, it is necessary to conduct high resolution in situ observations in spring when $fCO_2$ changes rapidly.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.2
• /
• pp.142-157
• /
• 2015

This study examines how traditional knowledge functions in the specific techniques to make pottery in terms of the traditional knowledge on the pottery techniques of Onggi potters. It focuses on how traditional pottery manufacturing skills are categorized and what aspects are observed with regard to the techniques. The pottery manufacturing process is divided into the preparation step of raw material, the molding step of pottery, and the final plasticity step. Each step involves unique traditional knowledge. The preparation step mainly comprises the knowledge on different kinds of mud. The knowledge is about the colors and properties of mud, the information on the regional distribution of quality mud, and the techniques to optimize mud for pottery manufacturing. The molding step mainly involves the structure and shape of spinning wheels, the techniques to accumulate mud, ways to use different kinds of tools, the techniques to dry processed pottery. The plasticity step involves the knowledge on kilns and the scheme to build kilns, the skills to stack pottery inside of the kilns, the knowledge on firewood and efficient ways of wood burning, the discrimination of different kinds of fire and the techniques to stoke the kilns. These different kinds of knowledge may be roughly divided into three categories : the preparation of raw material, molding, and plasticity. They are closely connected with one another, which is because it becomes difficult to manufacture quality pottery even with only one incorrect factor. The contents of knowledge involved in the manufacturing process of pottery focused are mainly about raw material, color, shape, distribution aspect, fusion point, durability, physical property, etc, which are all about science. They are rather obtained through the experimental learning process of apprenticeship, not through the official education. It is not easy to categorize the knowledge involved. Most of the knowledge can be understood in the category of ethnoscience. In terms of the UNESCO world heritage of intangible cultural assets, the knowledge is mainly about 'the knowledge on nature and universe'. Unique knowledge and skills are, however, identified in the molding step. They can be referred to 'body techniques', which unify the physical stance of potters, tools they employ, and the conceived pottery. Potters themselves find it difficult to articulate the knowledge. In case stated, it cannot be easily understood without the experience and knowledge on the field. From the preparation of raw material to the complete products, the techniques and traditional knowledge involved in the process of manufacturing pottery are closely connected, employing numerous categories and levels. Such an aspect can be referred to as a 'techniques chain'. Here the techniques mean not only the scientific techniques but also, in addition to the skills, the knowledge of various techniques and levels including habitual, unconscious behaviors of potters.