• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.75-84
• /
• 2000

GIS has been building for various application fields with the aids of NGIS project, especially numerous municipal governments are building a UIS in the level of local governments' informatization. Although there are some difference between municipal governments' business, still many things are in common. So far, individual municipal governments have developed a UIS for their own use, which lead to duplicated development of the UIS. The component technology has been introduced to remove such duplicated efforts and it enabled maximizing the reusablilty of the UIS already developed. This paper proposes a component design for network analysis of the drinking water to calculate the amount of flow and the head loss. This component design provides the initial water amount to estimate the amount of the network flow and the head loss, thereby supports the decision making such as installation or extension of the pipe network. The process of the component design accompanies the business reengineering to support the standardized business work flow. Also, the design of the network analysis component uses the algorithms induced with UML specification. Based on the component design, the component development has been progressing and the network analysis system would be followed. In the near future, another component to integrate the network analysis and the business related to the drinking water needs to be developed.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2000.06a
• /
• pp.181-186
• /
• 2000

국가지리정보체계사업을 시작으로 여러 응용분야에서 지리정보시스템을 구축하고 있으며, 특히 지자체에서는 도시정보화 차원에서 UIS(Urban Information System;도시정보시스템)를 구축하고 있다. 지자체의 업무들은 지자체의 상황에 따라 조금씩 차이를 보이지만 업무 단위로 따져 볼 때 공통적으로 수행되는 업무들이 많으며, 지리정보 관련 업무 또한 예외가 아니다. 지금까지 각 지자체의 도시정보시스템은 공통업무에 대하여 중복개발이 불가피 하였으며, 재사용성을 기대하기 어려웠다. 이런 비효율을 극복하는 방안으로 컴포넌트 기술이 대두되었으며, 컴포넌트 기술을 이용하여 업무변화에 유연하고 재활용을 극대화할 수 있는 업무 컴포넌트 개발이 필요한 시점이다. 본 논문은 지자체의 지리정보 관련 업무의 하나인 하수도 업무 중 하수배출용량 산정을 위한 하수도 관망해석 컴포넌트 설계를 제시하였다. 하수도 관망해석 컴포넌트는 하수배출용량을 산정하고, 하수 배출용량을 토대로 통수능이 부족한 하수관거를 추출하며, 통수능 부족 관거에 대하여 적정한 교체 관경 결정을 지원할 수 있도록 설계하였다 컴포넌트 설계과정은 표준업무를 지원할 수 있도록 업무분석을 수행하였으며, 이의 결과물로 하수도 관망해석 알고리즘을 도출하였으며, 알고리즘을 기반으로 하수도 관망해석 업무를 수행하는 하수도 관망해석 컴포넌트를 설계하고 설계 내용을 UML(Unified Modeling Language)로써 명세화 하였다. 현재 설계에 따라 하수도 관망해석 컴포넌트가 개발되고 있으며, 개발된 컴포넌트를 이용한 하수도 관망해석 시스템을 구축할 예정이다. 추후에는 하수도 관망해석 컴포넌트와 하수도 업무 컴포넌트와의 통합부분에 대한 연구가 진행되어야 할 것이다.7.0로 하고 표준(標準) EDTA 용액(溶液)을 소량(少量)넣고 8N-KOH로 pH $12{\sim}13$으로 하고 N-N 희석분말(稀釋粉末)을 지시약(指示藥) 으로써 표준(標準) EDTA 용액(溶液)으로 적정(滴定)하여 Ca 치(値)를 얻었다. Ca와 Mg의 합계결정치(合計決定値)와 Ca 적정치(滴定値) 차(差)로 Mg 치(値)를 얻었다. 음(陰) ion 구분(區分)으로부터 상법(常法)에 의하여 $MgNH_4PO_4$의 침전(沈澱)을 만들어서 HCl에 녹키고 일정량(一定量)의 표준(標準) EDTA 용액(溶液)을 넣어 pH 7.0로 한다음 완충액(緩衝液)으로 pH 10으로 하고 BT 지시약(指示藥)을 써서 표준(標準) Mg $SO_4$용액(溶液)으로 적정(滴定)하여 P 치(値)를 얻었다. 본법(本法)으로 Na-phytate를 분석(分析)한 결과(結果) Na-phytate의 분자식(分子式)을 $C_6H_6O_{24}P_6Mg_4CaNa_2{\cdot}5H_2O$라고 하였을 때의 이론치(理論値)에 비(比)하여 P가 98.9% Cark 97.1%, Mg가 99.1%이고 통계처리(統計處理)한 결과분석치(結果分析値)와 이론치(理論値)는 잘 일치(一致)된다. 그러나 종래법(從來法)에 의(依)한 분석치(分析値)는 이론치(理論値)에 비(比)하여 P가 92.40%, Cark 86.80%, Mg가 93.80%로서 이론치(理論値)와 일치(一致)하지 않는다. 3) Na-phytate를 전분(澱粉)과 일정(一定)한 비(比)로 혼합(混合)하고 본법(本法)으로 P,Ca 및 Mc를 정량(定量)한 결과(結果) 이들의 회수율(回收率)은 거의 100%이었다. 4) 본분석법

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.2
• /
• pp.127-132
• /
• 1999

Protoplasts were isolated from the leaf mesophyll tissue of in vitro 4-weeks-old Arabidopsis thaliana and cultured in MS liquid medium supplemented with 2.0 mg/L NAA, 0.5 mg/L BAP and 9% mannitol in the dark at $25^{\circ}C$. When protoplast-derived microcolonies were dehydrated, the frequency of callus induction enhanced approximately 7-fold higher compared with non-dehydrated microcolonies in CP medium. Fifty callus lines were selected from dehydrated microcolonies. Shoots were efficiently initiated from the green spots of the selected shoot forming calli cultured on MS regeneration medium supplemented with 0.05 mg/L IAA, 7.0 mg/L 2-iP and 30 g/L sucrose under continous illumination for 4 weeks. Shoot regeneration frequencies (calli regenerating at least one shoot) were 3.5%~56%. Histological observations of shoot forming callus revealed that tracheary elements initiated from inner compact cells, and that meristemoids developed to shoot primordia and shoots. Roots were induced from these regenerating shoots on MS medium without phytohormones. These regenerants were successfully transplanted into potting soil. Morphological characterization of 50 protoplast-derived plants showed that the frequency of normal type was 78%.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.2
• /
• pp.121-126
• /
• 1999

Calli were induced from the petiole explants of Pimpinella brachycarpa on MS medium supplemented with 0.5 mg/L 2,4-D and 0.1 mg/L BA after four weeks of culture. Compact clusters of small and dense cells among these calli were selected and suspension-cultured as the source of embryogenic calli. When transferred to MS medium with 0.1 mg/L NAA, the suspension-cultured cells grew to embryogenic callus. Somatic embryos derived from these embryogenic calli developed into plantlets. The cDNA library was constructed in the embryogenic callus and in order to screen the cDNA library, these cDNAs were plated at a density 1.5 $\times$ 10^5 plaques per 15 cm petridish. Among 19 clones showing preferential hybridization with petiole HD-Zip gene, five clones were obtained after second screening. Four clones among them, were highly homologous to P. brachycarpa shoot-tip Phz4 gene, but one clone, Phc5 was about 1.5 kb which has an extra 163 bp to 5' upstream of Phz4. The Phc5 was 1,531 bp containing poly A tails of 18 bases. ATG start codon for Phc5, was located at position 284 with an open reading frame of 906 by which encodes a polypeptide of 302 amino acids. The Phc5 protein revealed that the polypeptides between 135 and 195 contain a homeodomain as the `leucine zipper' motif.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.65-77
• /
• 2009

This paper proposes fast image processing algorithms using SSE (Streaming SIMD Extensions) instructions. The CPU's supporting SSE instructions have 128bit XMM registers; data included in these registers are processed at the same time with the SIMD (Single Instruction Multiple Data) mode. This paper develops new SIMD image processing algorithms for Mean filter, Sobel horizontal edge detector, and Morphological erosion operation which are most widely used in automated optical inspection systems and compares their processing times. In order to objectively evaluate the processing time, the developed algorithms are compared with OpenCV 1.0 operated in SISD (Single Instruction Single Data) mode, Intel's IPP 5.2 and MIL 8.0 which are fast image processing libraries supporting SIMD mode. The experimental result shows that the proposed algorithms on average are 8 times faster than the SISD mode image processing library and 1.4 times faster than the SIMD fast image processing libraries. The proposed algorithms demonstrate their applicability to practical image processing systems at high speed without commercial image processing libraries or additional hardwares.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.154-161
• /
• 2011

This paper presents a compact integrated transceiver module for 2.4 GHz band applications using Low Temperature Co-fired Ceramic(LTCC) technology. The implemented transceiver module is divided into an RF Front-End Module (FEM) part and a transceiver IC chip part. The RF FEM part except an SPDT switch and DC block capacitors is fully embedded in the LTCC substrate. The fabricated RF FEM has 8 pattern layers and it occupies less than $3.3\;mm{\times}5.2\;mm{\times}0.4\;mm$. The measured results of the implemented RF FEM are in good agreement with the simulated results. The transceiver IC chip part consists of signal line, power line and transceiver IC for 2.4 GHz band communication system. The fabricated transceiver module has 9 layers including three inner grounds and it occupies less than $12\;mm{\times}8.0\;mm{\times}1.1\;mm$. The implemented transceiver module provides an output power of 18.1 dBm and a sensitivity of -85 dBm.

• Journal of the Korea Convergence Society
• /
• v.11 no.9
• /
• pp.297-303
• /
• 2020

The purpose of this study is to investigate the effects of aerobic exercise and probiotics ingestion on motor learning and body weight in female mice during adolescence. The subjects were divided into six groups of variables, such as non-exercise, moderate, high-intensity exercise, probiotics ingestion, and non-probiotics, and then treated for four weeks. The vertical grid test was conducted before and after the treatment to evaluate motor learning and bodyweight. The high-intensity exercise and probiotics ingestion group showed fastest up, rotation, and down rate than the non-exercise group (p<.001). Also, a group that treated exercise and probiotics tended to record speedier performance than those that performed the only exercise. Comparing weight changes, the weight gain of a group that performed only moderate-intensity exercise was higher than that of a non-probiotics and non-exercise group (p=.032). Taken together, aerobic exercise during adolescence can help improve motor learning, and more efficient motor learning can be achieved when combined with probiotics ingestion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.30-30
• /
• 2007

현재 다양한 종류의 RF 통신 제품이 시장에 등장하면서 제품의 경쟁력 확보에 있어 소형화 정도가 중요한 이슈가 되고 있다. Passive Device는 RF Circuit을 제작할 때 많은 면적을 차지하고 있으며 이를 감소시키기 위해 여러 연구가 진행되고 있다. 가장 효과적인 방법으로 반도체 집적기술로 크기를 줄이는 방법이 있으나, 공정이 비싸고 제작 시간이 오래 걸려 제품개발 시간과 개발비용이 상승하게 된다. 반면에 SoP-L 공정은 PCB 제작에 이용되는 일반적인 재료와 공정을 사용하므로 개발 비용과 시간을 줄일 수 있다. SoP-L의 또 하나 장점은 다종 재료를 다층으로 구성할 수 있다는 점이다. 최근 chip-type의 Device를 PCB 기판 안에 내장하는 방법의 RF Circuit 소형화 연구가 많이 진행되고 있다. 본 연구에서는 SoP-L 공정으로 chip-type 수동소자를 PCB 기판 내에 함몰하여 수동소자회로를 구현, 분석하여 보았다. 수동소자회로는 880 MHz~960 MHz(GSM) 영역과 1.71 GHz~1.88 GHz(DCS) 영역을 나누는 Diplexer를 구성하였다. 1005 size의 chip 6개로 구현한 Diplexer를 표면실장과 함몰공정으로 제작하고 Network Analyzer로 측정하여 비교하였다. chip 표면실장으로 구현된 Diplexer는 GSM에서 최대 0.86 dB의 loss, DCS에서 최대 0.68 dB의 loss가 나타났다. 표면실장과 비교하였을 때 함몰공정의 Diplexer는 GSM 대역에서 약 0.5 dB의 추가 loss가 나타났으며 목표대역에서 0.6 GHz정도 내려갔다. 이 결과를 바탕으로 두 공정 간 차이점을 확인하고, 함몰공정으로 chip-type 수동소자를 사용하였을 때 고려해야 할 점을 분석하였다. 이를 바탕으로 SoP-L 함몰공정의 안정성을 높여서 이것을 이용한 회로의 소형화에 적용이 가능할 것으로 기대한다. 특히 능동소자의 DC Power Control에서 고용량의 수동소자를 이용할 때 집적도를 높일 수 있을 것이다.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.3
• /
• pp.195-200
• /
• 1998

Callus induction from leaf and stem explants of Arabidopsis thaliana was successfully obtained when leaf explants were cultured on MS medium containing 2.0 mg/L 2,4-D in the dark and also, when stem explants were cultured on CP medium containing 0.5 mg/L 2,4-D and 0.1 mg/L BAP. Explant-derived sliced calli were suspension-subcultured every week in CP liquid medium with 0.5 mg/L 2,4-D and 0.1 mg/L BAP in the dark, and shoot-forming cell clusters of nodular, pale yellow and knobby type were selected after 7-8 weeks of culture. Shoots were initiated from the green spots of the selected shoot forming calli cultured on MS regeneration medium containing 0.05 mg/L IAA, 7.0 mg/L 2-iP and 30 g/L sucrose under continous illumination for four weeks. Shoot regeneration frequency (calli regenerating at least one shoot) was more than 50%. For plant regeneration, excised shoots were trnasferred to hormone free medium for root initiation after 4 weeks of culture. The regenerants were bolting after 2 weeks of culture and formed in vitro flowering buds within bracts after 4 weeks of culture.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.4
• /
• pp.295-304
• /
• 2002

Objectives : This study was carried out to investigate the cause, magnitude and transmission route of the cholera outbreak in 2001 Methods : The study population were those persons who ingested foods at the restaurant, were confirmed as cholera patients, had symptoms of diarrhea and sewed as workers at the restaurant. A questionnaire survey and microbiological examinations on the microbes isolated from rectal swabs were conducted. Of the cases, 316 food histories were surveyed by an analysis of the restaurant menu. Results : There were 139 confirmed cases of cholera reported in Korea in 2001. Of these, 104 were related to the restaurant. By region, Gyeongsangbuk-do had the highest incidence with 91 cases. Of these 91 cases, 74 had ingested foods at the restaurant, 2 were employees and 3 were secondary infection cases within the families. The results of the odds ratio analysis of the 316 persons having ingested foods at the restaurant were as follows: sandwiches 5.07 (95% CI, 1.85-14.59), soybean curd 2.45 (95% CI, 1.09-5.56), noodles 2.34 (95% CI, 1.24-4.42), steamed squid 2.01 (95% CI, 1.17-3.47) and vinegared rice 1.82 (95%, CI, 1.08-3.09). It was certain the restaurant in question was the cause of the 2001 outbreak. Conclusions : We suspected that more than one restaurant employee contaminated foods served at the restaurant. In addition, eating raw fishes purchased at the Pohang Fisheries infected the employees of the restaurant. There is a possibility that these raw fishes were themselves contaminated by cholera bacilli in the sea.