• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.3
• /
• pp.219-223
• /
• 2016

DC microgrid system is attracted attention in the world, because DC distribution system is more energy efficient than AC distribution system. To analyse the contribution effects of distributed generation(DG) in LVDC distribution system through modeling the Rectifier, DC/DC converter, Energy Storage System(ESS) and Photovoltaic(PV). using PSCAD/EMTDC. This paper analyses fault response characteristics in LVDC distribution system according to the interconnection and islanding operation of DG. Based on research results on the paper, direction for development of fault current reduction method for LVDC distribution system is suggested.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.928-936
• /
• 2012

The microgrid concept assumes a cluster of loads and microsources operating as a single controllable system that provides a new paradigm for defining the operation of distributed generation. This system can be operated as both grid-connected mode and islanded mode. In other words, the microgrid can be operated to meet their special need; such as economics in steady state and local reliability in islanded mode due to the grid fault. This paper presents the AGC (Automatic Generation Control) method for microgrid with EMS (Energy Management System).

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.11a
• /
• pp.307-314
• /
• 2000

정보기술이 발달하면서 자료의 흔적들이 체계화된 데이터베이스에 저장이 되고, 더불어 데이터베이스의 규모는 점점 커지고 있다. 데이터 마이닝은 이런 방대한 자료의 분석을 통해, 그 속에 숨어있는 의미를 찾는 과점이라고 될 수 있다. 본 논문에서는 대우정보시스템(주)서 개발된 사용자지향 데이터 마이닝 도구인 XM-Tool/Miner의 개발을 대상으로 하고 있다. 개발된 XM-Tool/Miner은 문제 중심적 마이닝 도구를 목표로 하였으며, 대표적인 마이닝 알고리즘을 적용하였고, 또한 사용의 편이성에 초점을 맞추었다. 더 나아가 데이터 마이닝 기법뿐만 아니라 데이터의 샘플링과 성능향상을 통하여 방대한 데이터로부터 다양한 지식탐사가 가능해지고, 발견된 규칙 또는 지식의 유용성 측정을 통하여 업무 분야의 특성에 따라 효과적으로 반영되며 의사 결정 및 CRM마케팅, 동향분석 및 예측 등에 유용한 정보를 추출하는 도구로 사용할 수 있을 것이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.687-690
• /
• 2000

This paper provides the result of the analysis of the lightening arresters which were disconnected from the power line due to the overvoltage having high current. The effect of thermal runaway on the microstructures of lightening arrester's block was intensively investigated. The chance of the microstructures of the blocks was limited only on the breakdown paths and near them. Also even though a disconnector was disconnected from the arrester, some of the lightening arrester were showed normal characteristics.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.223-225
• /
• 2005

This paper presents a novel prototype of a current source resonant inverter using insulated gate bipolar transistors for driving a streamer reactor, streamer generation technology has been recognized as one of the best methods for water treatment, disinfection, industrial wastes utilization, and so on. However, some technological difficulties related to efficient streamer production have been significant problems restricting streamer usage in the industrial plants. Introduced in this paper is a pulse density modulated high frequency inverter for a plasma generate, which is developed with the aim to improve power conversion and control characteristics of the streamer reactor by using advances in power electronic technology. The developed system implements the feedforward control-based pulse density modulation control scheme with pulse width modulation feedback control strategy to compensate temperature and other environmental influences on streamer discharge.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1413-1415
• /
• 2005

In paper, propose new partial resonance ZCS PWM controlled High frequency insulating Full-bridge DC/DC converter not using exciting current of high frequency transformer. It is compared with the existing principles in characteristics. It also realizes a widely stabilized ZVS operating using new On-Off control method at synchronized power rectification MOSFET of high frequency insulating transformer secondary. Finally, it is brought over 97[%] measurement -efficiency by proposed DC-DC converter. It is proved effectiveness of new methods using DC UPS PWM rectifier as switching power.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.151-152
• /
• 2016

최근 저압직류배전에 대한 연구가 급속도로 진행되면서 배전망에 적용되는 구성요소에 대한 연구가 활발히 진행 중이다. 본 논문에서는 대용량 수용가 배전반에 접속된 구성요소 중 배전계통으로부터 직류전력 공급하기 위한 양방향 DC/DC 컨버터, 수용가 직접 전력공급을 위한 직류 저압 태양광 발전시스템용 DC/DC 컨버터, 저압 직류 에너지저장시스템용 DC/DC 컨버터의 운전에 있어서 배전계통간 전력조류를 양방향 운전의 타당성에 대해 비교하고, 운용상 얻어지는 효율 개선 등에 대한 것을 비교 검토하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1083-1088
• /
• 2004

Zinc air batteries obtain their energy density advantage over the other batteries by utilizing ambient oxygen as the cathode materials, and reusing cathode as recycled form. And specific capacity of zinc powder is as high as 820mAh/g. Our research team succeeded in producing 2.4 Ah class zinc air battery for cellular phone application. In this paper we had studied performance of cathode according to various factors and demonstrated the performance of 2.4 Ah class zinc air battery for cellular phone application.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.8-9
• /
• 2019

The rebar work is a labor intensive construction work with a high labor cost ratio. It is difficult to manage the productivity, construction time, and safety of rebar work. The problem of productivity decreased in rebar construction is due to a lack of workers according to the aged workers. Partial prefabrication rebar can be an alternative solution to productivity decreased in rebar work. The characteristic of partial prefabrication method is that time consuming component such as stirrup of beam assemble in factory and others assemble in site. Therefore, in this study, the time required for each rebar assembly method is measured and analyzed to confirm the possibility of productivity improvement.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.4
• /
• pp.229-236
• /
• 2019

This study proposes a DC-DC converter topology of solid-state transformer for low-voltage DC distribution. The proposed topology consists of a voltage balancer and bipolar DC-DC converter. The voltage and current equations are obtained on the basis of switching states to design the controller. The open-loop gain of the controller is achieved using the derived voltage and current equations. The controller gain is selected through the frequency analysis of the loop gain. The inductance and capacitance are calculated considering the voltage and current ripples. The prototype is fabricated in accordance with the designed system parameters. The proposed topology and designed controller are verified through simulation and experiment.