• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.234-238
• /
• 2007

Since the plant industry is a total business, it has great impact on the related industries and generates high value. However, in order to have a competitive engineering skills and capabilities, the plant industry requires long-term investment and a continuous strategic planning at the consortium level or national level. Also, a system needs to be established to share the information of the plant industry's overseas orders awarded and success factors. Thus, this study has conducted a survey and case study of the plant construction in foreign countries. Statistical analysis was performed and a basic data structure was built as a means of improving the future technological capabilities of the plant industry.

• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.338-346
• /
• 1997

Mechanical properties of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composites fabricated by the reaction squeeze casting were compared with those of ($15%Al_2O_3{\cdot}SiO_2$)/Ai composites. Al-Ni intermetallic compounds ($10{\sim}20 {\mu}m$) formed by the reaction between nickel powder and molten aluminum were uniformly distributed in the Al matrix. These intermetallic compounds were identified as $Al_3Ni$ using X-ray diffraction analysis and they resulted in beneficial effects on room and high temperature strength and wear resistance. Microhardness values of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composite were greater by about 100Hv than those of ($15%Al_2O_3{\cdot}SiO_2$)/Al composite. Wear resistance of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composites was superior to that of ($15%Al_2O_3{\cdot}SiO_2$)/Al composites regardless of the applied load. While tensile and yield strength of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composites were greater at room temperature and $300^{\circ}C$, strength drop at high temperature was much smaller in hybrid composites.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.3
• /
• pp.241-249
• /
• 2003

The service life of steel bridges can be assured only when their strength, serviceability and fatigue safety are fulfilled. However, at the present time, the continuous research for fatigue of steel bridges is desperately required since not much research work has been done so far. In this study, a guideline on the fatigue design is suggested for the practical purpose in order to establish the long-term safety of steel bridges against fatigue. The continuous steel truss bridge was analyzed for the cumulative reversals of the actual traffic, stress ranges and fatigue strength. From the results, the domestic fatigue design procedure was found to be fairly overestimated in comparison to the design code of other foreign countries. Therefore, it is necessary to review the current fatigue design specifications and have the new and rationalized design criteria in the future domestic fatigue design guidance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.428-428
• /
• 2007

최근 고화질 카메라폰이 경박단소화 되는 경향에 따라 Plastic렌즈 또는 구면 Glass렌즈만으로는 요구되는 광학적 성능 구현이 힘들기 때문에 비구면 Glass렌즈에 대한 요구가 증가하고 있다. 이러한 비구면 Glass렌즈는 일반적으로 초경합금 성형용 코어를 이용한 고온압축 성형방식으로 제작되어지기 때문에 코어면의 초정밀 연삭가공 및 코어면 코팅기술 개발이 시급한 상황이다. 한편, 대표적인 난삭재 Silicon Carbide(SiC)는 광학적 특성 및 기계적 특성, 전기적 특성 등 우수한 특성을 가진 재료로서 우주망원경, 레이저 광 및 X선 반사용 미러 등 다종, 다양한 용도로 이용되고 있으며 전기, 전자, 정보, 정밀기기의 급격한 발전으로 SiC의 수요가 급격히 증가하고 있다. 비구면 Glass렌즈 성형용 코어를 SiC소재로 제작할 경우 성형용 코어의 수명향상, 렌즈 생산원가의 절감 및 코팅 과정의 간소화 등의 다양한 장점을 가지므로 SiC를 이용한 성형용 코어의 나노 정밀도급 초정밀 연삭가공기술의 개발이 필요하다. 본 논문에서는 3 메가픽셀, 2.5배 광학 줌 카메라폰 모듈용 비구면 Glass렌즈 개발을 목적으로 실험계획법을 적용하여 초경합금 성형용 코어의 연삭조건을 규명하였다. 초경합금 비구면 성형용 코어의 초정밀 연삭가공조건 및 결과를 바탕으로 난삭재인 Silicon Cabide(SiC)의 연삭가공조건을 구하고 이를 이용하여 비구면 Glass렌즈 성형용 코어를 초정밀 연삭가공하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.57-57
• /
• 2007

Aspheric glass lenses have many optical advantages, for glass have superior optical performance and an aspheric form can reduce optical aberrations. Recently, the use of it is rapidly expanding as the mass production becomes possible by glass molding press and so this method is considered as the best method for fabricating an aspheric glass lens, but it is difficult to control many parameters for pressing and cooling process. Design of experiments (DOE) is a very useful tool to design and analyze complicated industrial design problems. This study investigated the pressing conditions to mold aspheric glass lenses for mega pixel phone camera module using DOE method. We have applied fractional factorial design and the response variable was set form accuracy (PV) of aspheric surface of molded lens. The results of analysis indicates that all factors expect for pressing force of each step are available for the form accuracy (PV). It was the optimum condition of the designed pressing conditions for lowering the form accuracy(PV) value of molded lens that all factors were at the low level. The form accuracy (PV) of mold and molded lens under the optimum condition are $0.85\;{\mu}m$ and $0.922\;{\mu}m$ respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.154-160
• /
• 1996

The control of diamond turning is usually achieved through a laser-interferometer feedback of slide position. The limitation of this control scheme is that the feedback signal does not account for additional dynamics of the tool post and the material removal process. If the tool post is rigid and the material removal process is relatively static, then such a non-collocated position feedback control scheme may surfice. However, as the accuracy requirement gets tighter and desired surface cnotours become more complex, the need for a direct tool-tip sensing becomes inevitable. The physical constraints of the machining process prohibit any reasonable implementation of a tool-tip motion measurement. It is proposed that the measured force normal to the face of the workpiece can be filtered through an appropriate admittance transfer function to result in the estimated dapth of cut. This can be compared to the desired depth of cut to generate the adjustment control action in additn to position feedback control. In this work, the design methodology on the admittance model-based control with a conventional controller is presented. The recursive least-squares algorithm with forgetting factor is proposed to identify the parameters and update the cutting process in real time. The normal cutting forces are measured to identify the cutting dynamics in the real diamond turning process using the precision dynamoneter. Based on the parameter estimation of cutting dynamics and the admitance model-based nanodynamic control scheme, simulation results are shown.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.1011-1017
• /
• 2006

It is so sensitive that the wetland ecosystem very weak in artificial interference and environment change. wetlands are a transitional zone between aquatic and terrestrial ecosystems. This natural property is important to people and life. It is necessary to preservation and protection of the wetland with a countermeasure. we really need to Environment-GIS (E-GIS) and digital map which is included correct position, attribute data and range of the wetland. In this study, we take priority of making a database of wetland management. Moreover, we standardize a digital map production of wetland in our research and we improve accuracy of control survey using GPS surveying. The main purpose of this study is to suggest a pre-estimated wetland that have not yet been discovered. by analysing terrain, geological feature, a geographical distribution of plants and animals using GIS.

• Journal of Drive and Control
• /
• v.17 no.1
• /
• pp.21-26
• /
• 2020

The load characteristics of a piston pump holder due to the squeeze effect are influenced by the surface shape and gap thickness of the holder (cradle). Therefore, the pressure distribution and the load capacity of the piston pump holder due to the squeeze effect are studied by using the CFD software and the surface shape and gap thickness of the piston pump holder are considered. In order to verify the accuracy of numerical results, the load capacities of a circular plate holder are numerically studied, and the accuracy of numerical results is verified by comparing with the theoretical results. Also, the pressure distribution and load capacity of the rectangular plate holder of a piston pump are obtained by using the CFD software. The results show that the load capacity of the square plate holder with grooves is slightly higher at a low gap thickness, but the effects of the number and arrangement of grooves on the load capacity of the holder are weak. We conclude that the load capacity and the maximum pressure are slightly affected due to the existence of grooves on the holder surface, and the fluid storing effect of the holder surface grooves during the operation is likely to prevent the dry-sticking phenomenon.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.872-878
• /
• 2004

Food products selected based on their annual sales and international acrylamide research data were analyzed for quantitation of acrylamide. Samples including raw food, substitute meal, snack, drink, and sauce products were analyzed by LC/MS/MS methods adopted by PDA. Upon comparison, concentrations of acrylamide in these products were similar to those analyzed in other countries.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.145-151
• /
• 2016

In response to the cavitation caused by the partial vacuum caused by the fluid flow, a paint was developed by dispersing the lamella-shaped glass-flake in resin for anti-cavitation. This composite paint was developed by using the inorganic filler (lamella shaped glass-flake) and the NBR (Acrylonitrile-butadiene rubber) which was modified epoxy resin. Especially, the glass-flake was a thin film with a thickness of about 100~200 nm and length of about $20{\sim}30{\mu}m$, the aspect ratio was about 200 to 300 times that of the plate-shaped. So the paint for anti-cavitation have shown excellent performance in corrosion resistance. The results of evaluating anti-cavitation performance was below, tensile strength $4.8{\sim}6N/mm^2$ or more, rupture elongation 30% or higher, abrasive speed $10mm^2/h$ or less. In particular, it showed more than twice the superior performance compared to existing advanced foreign products in anti-cavitation performance evaluation.