• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.227-232
• /
• 2003

In order to make a deep and precise micro-hole, electrode wear and clearance between the electrode and the workpiece are important parameters using micro-electrical discharge machining. In this study, experiments were carried out to show the characteristics of electrode wear and radial clearance with respect to the depth of machined hole. Electrode wear varied with respect to the depth of hole. With deeper machined hole, bigger clearance was observed. Also it was found that the diameter of electrode influences machining characteristics of deep holes.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.12 s.189
• /
• pp.111-116
• /
• 2006

Micro machining of tungsten carbide by electrochemical machining was studied. In ECM, machining conditions and electrolyte should be chosen carefully according to the property of workpiece materials. In this paper, sulfuric acid and nitric acid were used for tungsten carbide machining and machining characteristics were investigated according to machining conditions such as electrolyte, workpiece potential and applied pulse voltage. By using mixture of sulfuric acid and nitric acid, micro structures with sharp edge and good surface quality were obtained. Micro electrochemical turning was also introduced to fabricate micro shafts.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.10
• /
• pp.52-59
• /
• 2006

Micro electrical discharge machining (EDM) and micro electrochemical machining (ECM) were studied for the fabrication of micro structures. Micro EDM has been used to machine micro structures from metals. However, since the tool wear is inevitable during the machining, the tool wear is drawback for the precision machining. Micro ECM is also used for micro machining and produces better surface quality than that of micro EDM. Moreover, since tool electrodes are not worn out, micro ECM is suitable for the precision micro machining. However, the machining rate is lower than that of micro EDM. In this paper, therefore, the hybrid machining process which uses micro EDM as roughing and micro ECM as finishing is introduced. By using this hybrid machining, a hemisphere with $100\;{\mu}m$ radius was fabricated and the efficiency of the process was investigated experimentally.

• IE interfaces
• /
• v.16 no.2
• /
• pp.258-267
• /
• 2003

Recently, virtual reality technologies have been rapidly developed and realtime virtual simulation methods have been extensively employed for several application areas such as game, sports, manufacturing, military, and so on. A 3D database in realtime virtual simulation plays a key role because it makes users feel reality in virtual space. In a application view of 3D database, a systematic construction approach is required to reduce its construction time and increase its quality. However, many researches have been mostly focused on realtime graphic issues and its key technologies. In virtual simulation of transportation equipments, this paper proposes a systematic construction process of 3D database consisting of four stages as follows: 1) determine the activity space of a equipment, 2) collect data related to 3D database construction, 3) make a 3-dimensional modeling strategy, and 4) generate and evaluate a 3D model. This paper also introduces a new procedure of 3D environment modeling, which summarizes and expands our modeling experiences, to be used as a modeling guide.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.10a
• /
• pp.414-421
• /
• 2005

시청률은 각 방송사의 주요 수입원인 광고비 책정의 중요한 변수이다. 따라서 프로그램 편성자(Program Planner)는 경쟁 방송사의 편성을 고려한 시청률 최대화 전략을 수립하려 하며, 시청률 예측 모델을 사용하여 그 목적을 달성할 수 있다. 나아가 시청률 예측모델이 정확할수록 현재의 임의적인 광고비 책정 방식보다 정확한 광고비의 가격 책정이 가능해져 보다 합리적인 광고 및 미디어 시장 환경을 성립할 수 있다. 본 연구에서는 최근의 국내 TV 시청률 자료를 이용하여 국내 공중파 방송에 대한 시청률 예측 모델을 성립하고, 이를 이용한 시청률 최대화 전략을 제시한다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.612-614
• /
• 2008

본 논문에서는 소형 독립형 태양광발전시스템의 충방전제어 시스템을 구성하였으며 충방전 특성을 고찰하였다. 태양전지의 정격전압이 축전지의 충전전압보다 높으므로 충방전제어는 Buck 컨버터로 설계하였으며, 정전압 충전방식을 이용하였다. 또한 온도보상회로를 통하여 축전지의 충전전압에 대한 온도 보정을 하였다. 충방전제어 시스템의 특성을 고찰하기 위하여 170W급 독립형 태양광발전시스템을 구성하였으며 출력특성을 고찰한 결과 충전 및 방전이 원활히 진행됨을 알 수 있었으나 충전시 정전압 충전방식을 사용하였고 태양전지 출력측에 MPPT제어가 이루어 지지 않은 탓으로 태양전지 이용율이 떨어지는 단점이 있다는 것을 확인하였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.45-52
• /
• 1986

This paper presents an experimental model-based vision system which can identify and locate object in scenes containing multiple occluded parts. The objent are assumed to be regid, planar parta. In any recognition system the type of object that might appear in the image dictates the type of knowledge that is needed to recognize the object. The data is reduced to a seguential list of points or pixel that appear on the boundary of the objects. Next the boundary of the object is smoothed using a polygonal approximation algorithm. Recognition consists in finding the prototype that matches model to image. The best match is obtained by optimising some similarity measure.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.245-246
• /
• 2011

In recent research in this emerging and latent heat storage material features an innovative temperature - controlled Phase Change Materials to evaluate the superior thermal performance would like to calculate the thermal conductivity. Specified in KS F 4040 test specimen dimensions were equivalent in specifications, test methods according to KS L 9016 was an experiment in progress. As a result, the thermal conductivity of plain cement mortar mixed with more PCM came out with low thermal conductivity of mortar, thermal performance was excellent.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.972-975
• /
• 2003

The purpose of this study is to integrate Decision Theory Approach(DTA) and OR Theory Approach(OTA) systemically. and to develop Combination Theory Approach to build an optimal R&D project portfolio by strategies. To Integrate two approaches. Utility theory is introduced. Evaluation Results aye converted into utility values by the utility functions and the values are optimized by 0-1 programming. Scoring method and Integer programming is used to evaluation a correspondence with a goal and to allocation the limiting resources. And utility function is used to reflect the preference of decision makers on the project evaluation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.922-925
• /
• 2000

As mechanical components require size minimization and high precision, micro die machining technology has been developed in many fields. to machine a micro die by EDM, sometimes, a polygonal electrode is use. Machining corners by MEDM shows special characteristics. Physically, electrons are concentrated in sharp region and a high potential level is established in this region. Also, the electrode can't be rotated when machining a polygonal cavity, and machined debris can not drawn off easily. Discharge concentration in corners and 2nd discharge by machined debris result in distortion of corner shape. This phenomena can be improved by shaking the electrode. This method is also shown to be effective in improving surface roughness by circulation of machining fluid resulting from movement of the electrode.