• Korean Journal of Materials Research
• /
• v.25 no.4
• /
• pp.196-201
• /
• 2015

This paper presents the impact of partial shading on $CuIn_xGa_{(1-x)}Se_2(CIGS)$ photovoltaic(PV) modules with bypass diodes. When the CIGS PV modules were partially shaded, the modules were under conditions of partial reverse bias. We investigated the characterization of the bypass diode and solar cell properties of the CIGS PV modules when these was partially shaded, comparing the results with those for a crystalline silicon module. In crystalline silicon modules, the bypass diode was operated at a partial shade modules of 1.67 % shading. This protected the crystalline silicon module from hot spot damage. In CIGS thin film modules, on the other hand, the bypass diode was not operated before 20 % shading. This caused damage because of hotspots, which occurred as wormlike defects in the CIGS thin film module. Moreover, the bypass diode adapted to the CIGS thin film module was operated fully at 60% shading, while the CIGS thin film module was not operated under these conditions. It is known that the bypass diode adapted to the CIGS thin film module operated more slowly than that of the crystalline silicon module; this bypass diode also failed to protect the module from damage. This was because of the reverse saturation current of the CIGS thin film, $1.99{\times}10^{-5}A/cm^2$, which was higher than that of crystalline silicon, $8.11{\times}10^{-7}A/cm^2$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.78.2-78.2
• /
• 2012

최근 PRAM의 집적도 향상 및 3차원 적층에 의한 메모리 용량 향상을 위해 셀 선택 스위치로서 박막형 Ovonic Threshold Switching (OTS) 소자를 적용한 Cross bar 구조의 PRAM이 제안된 바 있다. OTS 소자는 비정질 칼코지나이드를 핵심층으로 하는 2단자 소자로서 고저항의 Off 상태에 특정 값 (문턱스위칭 전압) 이상의 전압을 가해주면 저저항의 On 상태로 바뀌고 다시 특정 값 (유지전압) 이하로 전압을 감소시킴에 따라 고저항의 Off 상태로 복원하는 특성을 갖는다. 셀 선택용 스위치로 적용되기 위해서는 핵심적으로 On-Off 상태간의 가역적인 변화 중에도 재료가 비정질 구조를 안정하게 유지해야 하며 전기적으로는 Off 상탱의 저항이 크고 또한 전류값의 점멸비가 커야 한다. GeSe는 이원계 재료로서 단수한 구성에도 불구하고 OTS 소자가 갖추어야할 기본적인 특성을 가지는 것으로 알려져 있다. 본 연구에서는 GeSe로 구성된 OTS 재료에 경원소인 질소를 첨가하여 비정질 상태의 안정성과 소자특성의 개선 효과를 조사하였다. RF-puttering 시 Ar과 $N_2$의 혼합 Gas를 사용하여 조성이 $Ge_{62}Se_{38}$ ($N_2$ : 3%)인 박막을 제작하여 DSC를 통해 결정화온도(Tx)를 확인하였고, $N_2$ gas의 함유량이 각각 1 %, 2 %, 3 %인 $Ge_{62}Se_{38}$인 박막을 전극의 접촉 부 면적이 $10{\times}10\;{\mu}m^2$인 cross-bar 구조의 소자로 제작하여 Threshold switching voltage ($V_{th}$), Delay time ($t_d$), $I_{on}/I_{off}$ 그리고 Endurance 특성을 평가하였다. DSC 분석 결과 $N_2$ 가 3 % 첨가된 GeSe 박막은 Tx가 $371^{\circ}C$에서 $399^{\circ}C$로 증가되었다. $N_2$가 1% 첨가된 GeSe 소자를 측정한 결과 $V_{th}$의 변화 없는 가운데 $I_{on}/I_{off}$이 약 $2{\times}10^3$에서 $5{\times}10^4$로 향상되었다. Endurance 특성 역시 $10^4$에서 $10^5$번으로 향상되었다. $t_d$의 경우 비정질 상태의 저항 증가로 인해 약 50% 증가되었다. 이러한 $N_2$의 첨가로 인한 비정질 GeSe 박막의 변화 원인에 대한 분석 결과를 소개할 예정이다.

• Journal of Energy Engineering
• /
• v.28 no.4
• /
• pp.1-7
• /
• 2019

In response to the recent increase in demand for hydrogen stations, the Ministry of Trade and Industry has enacted and promulgated special notifications to enable the installation of hydrogen stations in the form of the combined complex in existing automotive fuel supply facilities such as LPG, CNG, and gas stations. Hydrogen multi energy filling stations haven't been operated yet in Korea till the establishment of special standards, so it is necessary create special standards by considering all Korean environmental characteristics such as four seasons and daily crossings. In this study, we collected and analyzed the charging data of Ulsan LPG-Hydrogen Multi Fueling Station installed for the first time in Korea. The data are hourly temperature and pressure data from compressors, storage vessels and dispensers. We used the data collected for a year, including the highest temperature and the lowest temperature in Ulsan to compare seasonal characteristics. As a result, it was found that the change of the outside temperature affects the initial temperature of the vehicle's container of the hydrogen car, which finally affects the charging time and the charging speed of the vehicle. There was no effect on vehicle containers because the limit temperature suggested by the Korean Hydrogen Station Standard(KGS FP217) and the US Filling Protocol(SAE J2601) was not exceeded.

• Journal of Periodontal and Implant Science
• /
• v.28 no.1
• /
• pp.1-16
• /
• 1998

자연치의 경우에는 치주지수간의 상관관계가 정립되어 병적인 상태에 대한 진단과 그에 따른 치료방법을 결정하는데 많은 정보를 제공하나, 인공매식치에서는 아직 논란의 여지가 많다. 이에 임상적으로 안정화되어 기능하고 있는 인공매식치에서 치주지수간의 상관관계에 관하여 연구하고자 하였다. 총 43명의 환자(평균 44.7세)에 식립된 178개의 인공매식치를 연구에 이용하였다. 인공치아매식술을 시행한 후 1년에서 6년이 경과한 인공매식치에서 상부보철물을 제거한 후 치태지수, 치은열구출혈지수, 각화점막지수, 치주낭깊이, Periotest Values(PTVs) 등을 측정하여 각각의 분포상황과 상관관계를 분석하였다. 이 연구의 결과는 다음과 같다. 1. 치태지수의 평균값은 $0.83{\pm}0.82$이었다. 2. 치은열구출혈지수의 평균값은 $1.04{\pm}0.86$이었다. 3. 각화점막지수의 평균값은 $2.47{\pm}0.95$이었다. 4. 치주낭깊이의 평균값은 $3.12{\pm}1.14\;mm$이었다. 5. Periotest Values(PTVs)의 평균값은 $-0.66{\pm}4.28$이었다. 6. 치태지수, 치주낭깊이가 증가함에 따라 치은열구출혈지수는 유의성있게 증가하였다(P<0.01). 7. 각화점막지수가 증가함에 따라 치은열구출혈지수는 유의성있게 감소하였다(P<0.01). 8. 치은열구출혈지수와 매식치동요도 사이에서는 유의성있는 상관관계를 발견할 수 없었다(P>0.05). 9. 치주낭깊이와 매식치동요도 사이에서도 유의성있는 상관관계를 발견할 수 없었다(P>0.05). 10. 인공매식치의 직경과 길이가 증가함에 따라 매식치동요도는 유의성있게 감소하였다(P<0.01). 11. 하악에서의 매식치동요도가 상악의 경우와 비교하여 유의성있게 작았다(P<0.01). 결론적으로, 인공매식치에서도 자연치에서와 동일한 양상으로 치태가 많을수록, 그리고 치주낭 깊이가 깊을수록 염증의 심도와 관련이 깊은 것으로 생각된다. 특히, 인공매식치의 경우에는 같은 양의 치태가 존재시에 각화치은이 충분히 있는 쪽이 염증발생이 적은 것으로 나타났다. 치주조직에 염증이 존재하는 경우, 자연치아에서는 치아의 동요도가 증가하는 것으로 알려져있으나, 이 실험의 인공매식치에서는 유의성있는 상관관계를 발견할 수 없었다. 임상적으로 안정화된 인공매식치의 동요도는 염증정도에는 큰 영향을 받지 않고 인공매식치의 직경과 길이가 증가함에 따라 감소함을 보여주고 있다. 또한, 인공매식치의 동요도는 상하악골의 골질에 따라 차이가 있음을 명확히 보여주고 있다.

• Solar Energy
• /
• v.16 no.2
• /
• pp.113-122
• /
• 1996

This study presents experimental results of heat transfer characteristics of P.C.M. during outward melting process in a vertical cylinder. The experiment was carried out in six conditions, i. e., three different inlet temperature($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$) and two directions of working fluid(upward and downward). Melting P.C.M. produced a bell-shaped phase change interface. When the inlet temperature was $7^{\circ}C$, the lower region remained at $4^{\circ}C$ until the temperature of upper region reached $4^{\circ}C$. This was due to the state of maximum density of the lower region. When the direction of the working fluid in the case of $7^{\circ}C$, inlet temperature, was upward, the rate of melting and the total melting energy were higher than when it's direction was downward. But the rate of melting and the total melting energy appeared higher value as it's direction was downward when the inlet temperature is $4^{\circ}C$ and $1^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.23 no.1
• /
• pp.35-40
• /
• 2013

In this study, the influence on the surface passivation properties of crystalline silicon according to silicon wafer thickness, and the correlation with a-Si:H/c-Si heterojunction solar cell performances were investigated. The wafers passivated by p(n)-doped a-Si:H layers show poor passivation properties because of the doping elements, such as boron(B) and phosphorous(P), which result in a low minority carrier lifetime (MCLT). A decrease in open circuit voltage ($V_{oc}$) was observed when the wafer thickness was thinned from $170{\mu}m$ to $50{\mu}m$. On the other hand, wafers incorporating intrinsic (i) a-Si:H as a passivation layer showed high quality passivation of a-Si:H/c-Si. The implied $V_{oc}$ of the ITO/p a-Si:H/i a-Si:H/n c-Si wafer/i a-Si:H/n a-Si:H/ITO stacked layers was 0.715 V for $50{\mu}m$ c-Si substrate, and 0.704 V for $170{\mu}m$ c-Si. The $V_{oc}$ in the heterojunction solar cells increased with decreases in the substrate thickness. The high quality passivation property on the c-Si led to an increasing of $V_{oc}$ in the thinner wafer. Short circuit current decreased as the substrate became thinner because of the low optical absorption for long wavelength light. In this paper, we show that high quality passivation of c-Si plays a role in heterojunction solar cells and is important in the development of thinner wafer technology.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.28-36
• /
• 2019

In the present study, the effects of supply gas and water mist on the heptane pool fire extinguishing performance were investigated using the full cone and hollow cone twin-fluid atomizers. Air or nitrogen of 30 lpm (Liter per minute; L/min) was used as the supply gas, and the experiments were conducted under the water flow rate conditions of 0 lpm (i.e., discharge of air or nitrogen only) and 0.085 lpm (i.e., discharge of water mist with supply gas). Experimental results confirmed that the use of water mist discharge with the supply gas and full cone spray pattern reduced the fire extinguishing time as compared to that of only supply gas discharge and hollow cone spray pattern. In addition, for the discharge of water mist using the full cone twin-fluid atomizer, water mist significantly affected fire extinguishing performance, whereas the effect of the supply gas was less pronounced. On the other hand, for the discharge of water mist using the hollow cone twin-fluid atomizer, the fire extinguishing time was remarkably reduced by the supply of nitrogen, as compared with that of air, indicating that the supply gas as well as water mist can significantly affect fire extinguishing performance.

• Journal of Distribution Science
• /
• v.11 no.1
• /
• pp.45-53
• /
• 2013

Purpose - The environment-friendly agricultural product market in Korea sees continual high growth. Recently, the Korean government has been actively fostering environment-friendly agriculture as an engine of future growth. Korean people have increasingly become more health-conscious and interested in food safety issues. Many distribution and retailing companies have responded with various promotional activities. However, most of these are not strategic and appear to have unsatisfactory outcomes. The main purpose of this paper is to suggest effective marketing strategies for environment-friendly agricultural products. To achieve this aim, the study empirically investigates the effects of consumer characteristics and trust on the purchase intention of environment-friendly agricultural products. Research design, data, methodology - Based on the theory of planned behavior, and previous studies related to the purchase intention and consumption of environment-friendly agricultural products, we set up five study hypotheses. These related to the demographic characteristics of consumers, purchase intention, and behavior of the products. We then set up a study model and four study hypotheses relating to health consciousness, environmental consciousness, consumer trust level, purchase intention, and behavior of the products. The data were collected using a questionnaire given to consumers living in Seoul and southern Geonggi Province. The final sample size is 403 and mean age is 44.3. SPSS 15.0 for Windows and Amos 7.0 were used as statistical analysis tools. Meaningful results were derived using frequency analysis, correlation analysis, a t-test, and structural equation modeling. Results - Empirical results of this research are as follows. (1) First, it is shown that consumers consider such attributes as intimacy and health to be important when they buy environment-friendly agricultural products. (2) We also found that consumers recognize the value of environment-friendly agricultural products as high, but their trust level as low. (3) Consumer groups consisting of married couples, with higher education, higher income, and higher age are shown to have a higher intention of buying environment-friendly agricultural products than any other consumer group. (4) It is estimated that the level of consumer trust positively affects the purchase intention of environment-friendly agricultural products. The path coefficient (.138) between consumer trust and purchase intention is statistically significant at the α = .05 level. (5). It is also estimated that environmental consciousness positively affects purchase intention. The path coefficient (.245) between environmental consciousness and purchase intention is statistically significant at the α = 0.05 level. The standardized path coefficients of consumer trust and environmental consciousness with purchase intention are .556 and .288 respectively. Therefore, consumer trust affects purchase intention more than environmental consciousness. (6) Finally, purchase intention is estimated to positively affect purchase behavior. Conclusions - Based upon empirical results, this research suggests that marketers of environment-friendly agricultural products should focus more on increasing consumer trust levels, emphasizing the training and education of employees. The government also should pay attention to a standardized certification system for environment-friendly agricultural products. Marketers of environment-friendly agricultural products should consider the consumer groups of married couples, with higher education, higher income, and higher age as a major target segment.

• Korean journal of applied entomology
• /
• v.50 no.3
• /
• pp.203-208
• /
• 2011

This study was conducted to evaluate Geometridae (Lepidoptera) species as pests and the damage they cause in citrus orchards in Jeju, Korea. Seven geometridae species occurred in citrus orchards: Ascotis selenaria, Ectropis excellens, Menophra senilis, Biston panterinaria, Ourapteryx nivea, Odontopera arida and Hypomecis punctinalis. Among them, A. selenaria was most abundant, followed by E. excellens and M. senilis. Most Geometridae larvae fed on citrus leaves, but A. selenaria larvae ate fruits and leaves. Fruit damage of Citrus unshiu appeared as gnawed scars caused by young larvae feeding on fruit surface. Fruit damage on Shiranui fruits appeared as a wide hole or deep scars caused by feeding by mature larvae (6th instar). Citrus leaves damage due to Geometridae larvae was high during May to June. Fruit damage started in late June as the spring-shoots of citrus hardened and increased sharply in late July. In the field experiment, fruit damage in the late season reached 4.2% in both 2008 and 2009 and reached 5.2% in 2010. In citrus orchards, A. selenaria larvae started to appear in mid-May and their populations peaked in mid June, late July, and early to mid-September. Adult males of A. selenaria had a maximum peak in mid-May, and two other peaks in early to late July and late August to early September. A. selenaria male adults were collected in a pheromone traps constantly throughout Jeju Island.

• Korean journal of applied entomology
• /
• v.53 no.3
• /
• pp.281-286
• /
• 2014

In grape vineyards, whitish spots in a cloud shape have been often observed on the fruit surface recently. However, the cause of the halo spot symptom was unknown, hindering countermeasures to be properly designed for the control. A small hole in the middle of the formless halo spot remained as a scar formed by oviposition of the thrips. It became later a suberized scab, which is separated from the epidermal cells on the surface either to be retained on or to be detached from it as time proceeds. Such a symptom is distinguished from the feeding damages caused by thrips or true bugs occurring on the grape fruits. With DNA extracted from the egg-shell found in the hole, molecular diagnosis by amplifying an ITS2 region with universal primers and subsequently digesting the PCR product by an restriction enzyme (RsaI) revealed that the egg was laid by Frankliniella occidentalis. In addition, a mitochondrial COI sequence confirmed that the halo spot symptom was formed by its oviposition. This study provides accurate information on the peculiar damage symptom caused by oviposition of F. occidentalis that could be useful in the control strategies for this pest in vineyards.