• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.337-346
• /
• 2008

Objective: The purpose of this study was to determine whether an exogenous electric current to the alveolar bone surrounding a tooth being orthodontically treated can enhance tooth movement in human and to verify the effect of electric currents on tooth movement in a clinical aspect. Methods: This study was performed on 7 female orthodontic patients. The electric appliance was set in the maxilla to provide a direct electric current of $20{\mu}A$. The maxillary canine on one side was assigned as the experimental side, and the other as control. The experimental canine was provided with orthodontic force and electric current. The control side was given orthodontic force only. Electrical current was applied to experimental canines for 5 hours a day. The amount of canine movement was measured with an electronic caliper every week. Results: The amount of orthodontic tooth movement in the experimental side during 4 weeks was greater by 30% compared to that of the control side. The amount of increase in tooth movement in the experimental side was statistically significant. The amount of tooth movement in the experimental side during the first two weeks was !Bleater than that in the following two weeks. The amount of weekly tooth movement in the control side was decreased gradually. Conclusions: These results suggested that the exogenous electric current from the miniature electric device might accelerate orthodontic tooth movement by one third and have the potential to reduce orthodontic treatment duration.

• Journal of Korean Medicine Rehabilitation
• /
• v.24 no.3
• /
• pp.131-137
• /
• 2014

Objectives The purpose of this study was to compare the effects of MSAT (Mostion style acuputure treatment) on piriformis muscle regarding leg radiating pain with HIVD of L-SPINE. Methods Forty patients who received inpatient treatment from Febuarary 1 to March 31, 2014 in the Daejon-Jaseng oriental medicine hospital were divided into 2 groups by blocked randomization : Group A (n=20)=routine treatment on HIVD of L-SPINE with MSAT on piriformis muscle and Group B (n=20)=routine treatment on HIVD of L-SPINE (acupuncture, Shinbaro pharmacopuncture, herb medication, chuna treatment and physiotherapy). The MSAT (Mostion style acuputure treatment) on piriformis muscle was administered each day and both groups were received routine treatment each day. Evaluations were made before treatment, after 3 days and 7 days, and before discharge using the NRS (numeric rating scale) and ODI (oswestry disability index). The statistically significance was evaluated by SPSS 18.0 for windows. Results Compared to before treatment, the NRS (numeric rating scale) and ODI (oswestry disability index) of both A and B groups after 3, 7 days and before discharge of treatment significantly decreased (p<0.05). Regarding group comparison, the NRS (numeric rating scale) and ODI (oswestry disability index) of A group was significantly lower than the B group at 3, 7 days, before dischanre (p<0.05). Regarding improvement of the NRS (numeric rating scale) and ODI (oswestry disability index), A group was significantly lower than the B group at 3 day (NRS), 7day (ODI) (p=0.000) but there was no significant difference between the two groups at 7 days (NRS) and before discharge (p>0.05). Conclusions Compared to just routine treatment, the MSAT (Mostion style acuputure treatment) on piriformis muscle significantly improved the NRS (numeric rating scale) and ODI (oswestry disability index) after 3, 7 days, and before discharge. Because early intervention determines the grade of Leg radiating pain with HIVD of L-SPINE, the MSAT (Mostion style acuputure treatment) on piriformisat the early stage will be clinically helpful to patients.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.569-579
• /
• 2013

Robot control and image processing using a smartphone and Wi-Fi communication is introduced. The robot has a wheel and quadruped mechanism that is transformed according to the environment and is mainly used for drug bottle delivery. The captured image on the camera is transmitted to the smartphone in the form of stream data, and the image data is processed in the smartphone to enable the robot to identify an object and to control the robot itself. A network was constructed so that only image data from the stream data was used, and an image processing scheme to identify the drug bottle and deliver it to a person using a robot arm is also presented. In this study, image processing techniques and algorithms were purely implemented on a smartphone with considerable computational power and multiple functions rather than a computer, which contributes to the intelligence and miniaturization of the robot system.

• Pediatric Infection and Vaccine
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2012

Purpose : Although influenza is regarded as one of the major causes of morbidity and mortality in children with cancer, the actual vaccine coverage remains poor. We conducted evaluation of immunogenicity and safety of influenza vaccine in children with cancer. Methods : In this study, 25 children with cancer who received influenza vaccine (SK influenza IX vaccine$^{(R)}$) at the Korea Cancer Center Hospital between October and December 2009 were analyzed. Blood samples of patients were collected twice (at the beginning of this study and at 30th day after vaccination) and their antibody titers were measured using the hemagglutination-inhibition (HI) assay. Immunogenicity of the influenza vaccine was assessed by seroprotection rate on days 0 and 30, seroconversion rate on day 30, and mean fold increase (MFI) of geometric mean titer (GMT) of HI between days 0 and 30. Results : Any of the subjects in our study did not experienced serious adverse events after influenza vaccination. Seroprotection rates were 68% for H1N1, 40% for H3N2, and 36% for B. Seroconversion rates were 12% for H1N1, 16% for H3N2, and 20% for B. MFIs were 0.9 for H1N1, 1.2 for H3N2, and 1.8 for B. Conclusion : In the study, we found a limited protective immune response to influenza vaccine, among subjects with cancer. However, some subjects showed seroconversion, and there were no severe adverse events among all subjects, supporting the recommendation of annual influenza vaccination in children with cancer.

• Korean Journal of Materials Research
• /
• v.21 no.5
• /
• pp.243-249
• /
• 2011

To reduce manufacturing costs of crystalline silicon solar cells, silicon wafers have become thinner. In relation to this, the properties of the aluminium-back surface field (Al-BSF) are considered an important factor in solar cell performance. Generally, screen-printing and a rapid thermal process (RTP) are utilized together to form the Al-BSF. This study evaluates Al-BSF formation on a (111) textured back surface compared with a (100) flat back surface with variation of ramp up rates from 18 to $89^{\circ}C$/s for the RTP annealing conditions. To make different back surface morphologies, one side texturing using a silicon nitride film and double side texturing were carried out. After aluminium screen-printing, Al-BSF formed according to the RTP annealing conditions. A metal etching process in hydrochloric acid solution was carried out to assess the quality of Al-BSF. Saturation currents were calculated by using quasi-steady-state photoconductance. The surface morphologies observed by scanning electron microscopy and a non-contacting optical profiler. Also, sheet resistances and bulk carrier concentration were measured by a 4-point probe and hall measurement system. From the results, a faster ramp up during Al-BSF formation yielded better quality than a slower ramp up process due to temperature uniformity of silicon and the aluminium surface. Also, in the Al-BSF formation process, the (111) textured back surface is significantly affected by the ramp up rates compared with the (100) flat back surface.

• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.617-622
• /
• 2010

We have studied methods to save Si source during the fabrication process of crystalline Si solar cells. One way is to use a thin silicon wafer substrate. As the thickness of the wafers is reduced, mechanical fractures of the substrate increase with the mechanical handling of the thin wafers. It is expected that the mechanical fractures lead to a dropping of yield in the solar cell process. In this study, the mechanical properties of 220-micrometer-solar grade Cz p-type monocrystalline Si wafers were investigated by varying saw-damage etching conditions in order to improve the flexural strength of ultra-thin monocrystalline Si solar cells. Potassium hydroxide (KOH) solution and tetramethyl ammonium hydroxide (TMAH) solution were used as etching solutions. Etching processes were operated with a varying of the ratio of KOH and TMAH solutions in different temperature conditions. After saw-damage etching, wafers were cleaned with a modified RCA cleaning method for ten minutes. Each sample was divided into 42 pieces using an automatic dicing saw machine. The surface morphologies were investigated by scanning electron microscopy and 3D optical microscopy. The thickness distribution was measured by micrometer. The strength distribution was measured with a 4-point-bending tester. As a result, TMAH solution at $90^{\circ}C$ showed the best performance for flexural strength.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.232-237
• /
• 2005

Purpose: To evaluate the effectiveness of arthroscopic direct cystic removal of popliteal cyst using 70 degree arthroscopy and posteromedial portal. Materials and Methods: From January 2003 to January 2004, 21 patients(23 cases) with popliteal cyst have been treated by direct cystic decompression with arthroscopy. The average age of the 21 patients was 54 years(range 35 to 78 years). There were 5 males and 16 females. Of the 23 cases,8 cases were occured in right side and 11 cases were occured in left side. 4 cases were both sides. In all cases, preoperative MRI were performed to detect combined intraarticular pathology. At 6 months and 1 year postoperatively, follow-up ultrasonography were performed to detect recurrence of cyst. We used Rauschning and Lindgren criteria for clinical evaluation. Results: All cases had no recurrence and no complaints of pain, swelling, or functional impairment at 1 year after surgery. At ultrasonography, no recurrence were founded. One complication was occurred. Postoperatively, Rauschning and Lindgren criteria were more than grade 1. Conclusion: Arthroscopic direct cystic removal using arthroscopy and posteromedial portal is an effective method in popliteal cyst surgery.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.254-258
• /
• 2017

Mushroom mites have recently caused severe damage to sawdust beds, mushroom mycelia, and fruiting bodies; therefore, they have reduced the production of the button mushroom, Agaricus bisporus, in greenhouses. There are currently no registered pesticides for mushroom mites. It is necessary to selectively control mushroom flies and mites without affecting the growth of the mushroom. We examined biological control of mushroom mites using predatory mite Stratiolaelaps scimitus in button mushroom cultivation. As a result, a three times treatment (1 treatment after water cleaning, 1 treatment after fungus inoculation, and 1 treatment before or after casing) was most effective at controlling mushroom mites, with 3.000 predatory mites (3 bottles) scattered evenly over $165-230m^2$ every 1-2 m. Predatory mite Stratiolaelaps scimitus could control mushroom flies and mites at the same time and could be used at any time during cultivation.

• Research in Plant Disease
• /
• v.20 no.4
• /
• pp.264-269
• /
• 2014

The effect of biological control of the root-knot nematode, Meloidogyne incognita, on cucumber and lettuce was evaluated with green manure crop species in greenhouse. Nematicidal effect of sudan grass cultivation in cucumber greenhouse was comparable to that of chemical treatment with fosthiazate GR, showing the high activity of 88.6%. Sudan grass cultivation in lettuce greenhouse significantly reduced the number of M. incognita in soil, showing 93.5% of nematiidal activity. In addition, since growth of sudan grass was superior to other green manure crop species, it is considered that cultivation of sudan grass is proper to control M. incognita in greenhouse.

• The Korean Journal of Pesticide Science
• /
• v.19 no.2
• /
• pp.101-105
• /
• 2015

Efficacy of novel nematicide, imicyafos GR was evaluated against two species of the root-knot nematodes in pot and greenhouse conditions. When tested in pots, the population of Meloidogyne incognita and M. hapla was reduced sixty days after treatment, with mortality rate of 91.5% and 90.6%, respectively. Suppression effect of imicyafos GR on root galling in tomato was tested. The number of root galls caused by M. incognita and M. hapla was reduced 60 days after nematode inoculation, with the efficacy of 94.2% and 95.1%, respectively. Under greenhouse conditions planted with watermelon, melon, cucumber, and tomato, the efficacy of imicyafos GR on M. incognita persisted up to 60 days after treatment, showing 90% of control efficacy. Moreover, the number of root galling was more reduced than fosthiazate treatment, with the potential as a control agent.