• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.429-436
• /
• 2010

Hydraulic experiments were conducted to analyze the characteristics of stem waves due to multidirectional random wave incidence with the different incident angles of main wave direction. Both multi-directional and uni-directional random waves were used to generate the stem waves and their results were compared with each other. The experiment shows multi-directional random waves developed along the vertical wall tend to increase as the incident angle increases similar to the uni-directional waves. Moreover, the stem wave widths were almost same as those in uni-directional random wave cases. However, the experiment demonstrate the stem wave heights were significantly smaller in multi-directional random wave cases than in uni-directional random wave cases.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.6
• /
• pp.611-620
• /
• 2008

The process of sediment transport has a very complex mechanism due to waves, currents and bottom topography changes. Usually, beach erosion occurs from various causes such as non-equilibrium sediment transport condition, construction of seawall and rip currents. Therefore, when we try to reduce and develop countermeasures for beach erosion, we have to know the main mode and direction of sediment transport that causes beach erosion. In this study, the process of sediment transport on Jeonchon-Najung beach and main causes of beach erosion have been studied. Field investigation data, aerial photos and the results of numerical model test were used in the analysis. As a result, it was realized that the main causes of beach erosion at Jeonchon-Najung beach was due to the construction of fishery harbors and a seawall.

• Economic and Environmental Geology
• /
• v.7 no.4
• /
• pp.157-173
• /
• 1974

The Red Hill deposit of the Dongjom Copper Mine is the most promising deposit of the mine and under intensive exploration at present although there are eight more deposits of vein type. With total 2160m drilling of 9 holes completed and 400m drilling on two holes underway, the nature of the Red Hill deposit has come more clear. The copper content in the whole ore body is meager so far as the exploration done up to present indicates, but there are evidences that mineralization covers all over the granodiorite cupola at the Red Hill area. The petrological work and assay on the samples taken by the writers indicate that granodiorite rocks can be divided into fresh zone and alteration zone. Alteration zone consists of potassic and argillic zones accompanyied by silicification zone on basis of Lowell and Guilbert model Argillic zone has closely related with a mineralization in the Red Hill deposit. It has been cleared that the alteration acompanyied with the mineralization took place not only &long vertical fissures but also in the irregular lateral zone, the nature of which is unknown. Judging from the results of exploration and petrochemical study on the Red Hill deposit which is imbedded in a southern part of the granodiorite cupola, it can be concluded by the writer's opinion that the Red Hill deposit is possibly a porphyry copper deposit, because the shape of the ore body, mineral zoning and paragenesis and wall rock alteration resemble to those of typical porphyry copper deposits. It is the writers' opinion that more exploration work is required so as to evaluate the deposit.

• Economic and Environmental Geology
• /
• v.31 no.2
• /
• pp.149-158
• /
• 1998

Volcanic rocks including rhyolitic tuff, rhyolite and welded tuff in the Bupyeong silver mine area form a topographic circular structure known as a resurgent caldera. Granitic rocks are emplaced inside and outside area of the circular structure. K-Ar dating and Nd-Sr isotope studies were carried out to invesitigate the origin and petrogenetic evolution of the rhyolitic and granitic magma in the Bupeong silver mine area. Whole rock K-Ar age ranges from 208 to 131 Ma for rhyolitic rocks. Radiometric ages for the granitic rocks are 167.6 Ma for pink feldspar biotite granite from inside granitic pluton of the circular volcanic body, 178.8 Ma for the Kimpo hornblende biotite granite and 111.8 Ma for the Songdo foliated granite from outside granitic plutons of the volcanic body. The radiometric age data indicates that the volcanic activities which are partly overlapped by granite plutonic activities in the Bupyeong mine area had recorded early Jurassic and early Cretaceous in age. Initial Sr and Nd isotopic ratios of the rhyolitic rocks ($^{87}Sr/^{86}Sr$=0.710~0.719 and $^{143}Nd/^{144}Nd$=0.5115~0.5118) are similar to those of granitic rocks ($^{87}Sr/^{86}Sr$=0.709~0.716 and $^{143}Nd/^{144}Nd$=0.5115~0.5116) from inside granite stock. This means that similar source materials of felsic magma responsibles for the Bupyeong volcanic rocks and inside plutonic rocks. Based on the Nd and Sr isotopic compositions, rhyolitic and granitic magmas in the Bupyeong area originated from the partial melting of the old continental crust which has Nd model age ranging from 1500 to 2900 Ma. This is analogous to those of the other Jurassic granitoids in South Korea.

• Tribology and Lubricants
• /
• v.37 no.4
• /
• pp.129-135
• /
• 2021

An air-bearing stage uses externally pressurized air as the lubricant between the stage and the rail. The supporting force generated by the supplied air makes the stage rise and move smoothly with extremely low friction. Mechanical contacts rarely happen, the bearing surfaces do not produce wear particles, and dust is not generated. It also has the advantage of having low energy loss and high precision. Because of its advantages, an air-bearing stage is used in several types of machines that require high precision. In this article, the effect of the pocket depth on the hammering phenomena of the air bearing is studied. An analysis program is developed to calculate the dynamic behavior of the stage by solving the Reynolds equation between the stage and the guideway and the equations of motion on the stage. The acceleration, constant movement, and deceleration are applied to the stage. The stage is modeled as a five-degree-of-freedom system. In the course of the dynamic behavior, the hammering phenomena occur under some special conditions. The deeper the pocket, the more unstable the behavior of the stage, and air hammering occurs when it exceeds a certain depth. In addition, the higher the supply pressure, the more unstable the behavior of the stage. However, hammering occurs even with a shallow pocket depth. Other conditions that affect the hammering phenomena are calculated and discussed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.378-384
• /
• 2021

Objectives: Horse trainers ensure the horses they are training and monitor horse's health, hygiene. While most of the studies on horse trainer's health focused on musculoskeletal disorders, few studies have examined the health effect of occupational exposure. This study aimed to investigate the risk of lung cancer in Korean Horse trainers. Methods: Among the largest health screening program of health screening service of the National Health Insurance Corporation, 2,246 workers were selected for study. We utilized data from the National Health Insurance Service (NHIS) National Cohort Data Base 2005-2017. We performed analyses using a Cox's proportional hazards model to identify the risk of lung cancer in Horse trainers. Results: This study found that the horse trainers group had a higher risk of lung cancer 10.07 (95% CI :2.38-42.64) compared to other occupational group. Additionally, there was 6.5 times higher risk of lung cancer in non-smoker horse trainers group. Conclusions: We, thus, verified horse trainers could have relation with increase of lung cancer risk. As lung cancer is known as a cancer with a high contribution of occupational factors compared to other cancers, it is necessary to determine the efficacy of continuous attention and active management of occupational exposure.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.343-351
• /
• 2018

The purpose of this study was to analyze the mediating effects of mothers' depression on the relationships of marital conflict and young children's problem behaviors. Data was collected from 177 young children and their mothers. The results of this study revealed that young children's problem behaviors were significantly positively correlated with mothers' marital conflict and depression. Mothers' marital conflict were also significantly positively correlated with hyperactivity, anxious and aggressive behaviors. Mothers' depression was significantly positively correlated with hyperactivity, anxious and aggressive behaviors. Regression analysis revealed that marital conflict significantly affected their depression. Mothers' depression also significantly affected young children's hyperactivity, anxious and aggressive behaviors. The relationship between marital conflict and young children's problem behaviors was fully mediated by mothers' depression.

• Atmosphere
• /
• v.29 no.2
• /
• pp.131-147
• /
• 2019

On the urban scale, Micro-climate analysis models for urban scale have been developed to investigate the atmospheric characteristics in urban surface in detail and to predict the micro-climate change due to the changes in urban structure. BioCAS (Biometeorological Climate Impact Assessment System) is a system that combines such analysis models and has been implemented internally in the Korea Meteorological Administration. One of role in this system is the analysis of the health impact by heat waves in urban area. In this study, the vegetation cooling models A and B were developed and linked with BioCAS and evaluated by the temperature drop at the vegetation areas during ten selected heat-wave days. Smaller prediction errors were found as a result of applying the vegetation cooling models to the heat-wave days. In addition, it was found that the effects of the vegetation cooling models produced different results according to the distribution of vegetation area in land cover near each observation site - the improvement of the model performance on temperature analysis was different according to land use at each location. The model A was better fitted where the surrounding vegetation ratio was 50% or more, whereas the model B was better where the vegetation ratio was less than 50% (higher building and impervious areas). Through this study, it should be possible to select an appropriate vegetation cooling model according to its fraction coverage so that the temperature analysis around built-up areas would be improved.

• Atmosphere
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2019

For the allergy patient who needs to know the situation about the extent of pollen risk, the National Institute of Meteorological Sciences developed a pollen forecasting system based on the Community Multiscale Air Quality Modeling (CMAQ). In the old system, pollen emission from the oak was estimated just based on the airborne concentration and meteorology factors, resulted in high uncertainty. For improving the quality of current pollen forecasting system, therefore the estimation of pollen emission is now corrected based on the observation of pollen emission at the oak forest to better reflect the real emission pattern. In this study, the performance of the previous (NIMS2014) and current (NIMS2016) model system was compared using observed oak pollen concentration. Daily pollen concentrations and emissions were simulated in pollen season 2016 and accuracy of onset and end of pollen season were evaluated. In the NIMS2014 model, pollen season was longer than actual pollen season; The simulated pollen season started 6 days earlier and finished 13.25 days later than the actual pollen season. The NIMS2016 model, however, the simulated pollen season started only 1.83 days later, and finished 0.25 days later than the actual pollen season, showing the improvement to predict the temporal range of pollen events. Also, the NIMS2016 model shows better performance for the prediction of pollen concentration, while there is a still large uncertainty to capture the maximum pollen concentration at the target site. Continuous efforts to correct these problems will be required in the future.

• Journal of Environmental Health Sciences
• /
• v.45 no.1
• /
• pp.18-29
• /
• 2019

Objectives: The purpose of this study was to examine the relationship between urinary bisphenol A concentration and allergic diseases in children. Methods: This study was conducted in Seoul, South Korea. We collected urine samples from 231 children from a single elementary school in June 2014. Among these, 69 children with urinary creatinine levels outside the normal range were excluded. Information on allergic diseases was obtained from the parents of the children. Urinary bisphenol A was analyzed using a liquid chromatography tandem mass spectrometer. Logistic regression analysis was used to determine if allergic disease was affected by urinary bisphenol A concentration. Results: Girls had a significantly higher concentration of urinary bisphenol A than did boys (p<0.05). Children of 10-12 years old had a significantly higher concentration of urinary bisphenol A than did children 7-9 years old (p<0.01). Concentration of urinary bisphenol A was increased from underweight to overweight (p<0.05). As the concentration of urinary bisphenol A was increased by $1{\mu}g/L$ or $1{\mu}g/g$ creatinine, the risks of lifetime symptoms of atopic dermatitis in children was 1.22 times (95% CI; 1.05-1.41) or 1.08 times (95% CI; 1.01-1.15). Conclusion: Concentration of urinary bisphenol A was associated with gender, age, body mass index, and allergic disease. Particularly, urinary bisphenol A concentration was associated with lifetime symptoms of atopic dermatitis. The findings of this study could contribute to the management of health effects among sensitive groups such as children.