• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.3
• /
• pp.90-96
• /
• 2012

In order to determine optimal design length of adhesive joint of a composite rocket motor case, stress analysis of joint part according to changes of adhesive length was done. Adhesive length has a range of 50 mm to 300 mm as design variables. The ratio of adhesive length without any stress gradient to initial non-stressed adhesive length was determined as evaluation criteria for selection of adhesive length, which called "stress gradient length ratio". The numerical result showed that stress gradient length ratio of joint part with adhesive length of more than 200 mm was increased very slowly with increase of adhesive length. It means that adhesive length of about 200 mm could be the optimal dimension to ensure the structural safety of joint part against internal pressure of 2,500 psi.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.320-324
• /
• 2017

Effect of elliptical orifice on the spray characteristics of liquid jet ejecting into subsonic crossflows were experimentally studied. Circular/elliptical plain-orifice injectors, which had different ratios of the orifice length to diameter and major axis to minor axis, were used for transverse injection. Compared with the previous research, breakup lengths of elliptical nozzles are shorter than circular nozzles at all experimental condition. Cavitation/hydraulic flip are considered as a reduction in the breakup length at all circular/elliptical nozzle. In the case of liquid column trajectories, major axis which was placed to the crossflows, increases the frontal area of the liquid column exposed to the crossflows. Hence, the aerodynamic force exerted on the jet is increased and the penetration depth is reduced.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.161-172
• /
• 2004

본 연구의 목적은 각기 다른 수직 점프 동작 시 근육의 길이와 근육의 수축속도 변화를 비교 분석하는데 있다. 피험자의 운동학적 변인들을 분석하기 위해 2대의 고감도 카메라를 (60 Hz, Panasonic AG455) 사용하여 점프 동작을 촬영하였다. 대퇴직근, 내측광근, 외측광근, 중간광근, 대퇴이두근(단두), 내측과 외측 비복근의 길이와 근수축 속도는 Brand et al. (1982)에 의해 제시되어진 하지근 기시 정지점의 3차원 좌표값과 동작분석을 통한 하지 분절간의 회전 및 변환행렬을 사용하여 측정되어졌다. 일반적인 근육 길이와 수축속도의 변화 형태는 각기 다른 점프간에 매우 유사한 형태를 보였다. 상승기 초기에 대퇴사두근의 길이가 최대인것으로 나타났으며, 이에 반해 대퇴이두근과 내외측 비복근은 공중 동작이 발생하는 시점에 근의 길이가 최대인 것으로 나타났다. 근육의 길이 변화 범위는 대퇴직근이 35.9에서 47.5 cm, 외측광근이 29.4에서 38.8 cm, 중간광근이 31.5에서 38.0 cm, 내측광근이 30.9에서 38.6 cm, 대퇴이두근이 21.3에서 39.1 cm, 외측비복근이 31.4에서 33.5 cm, 내측비복근이 30.5에서 33.2 cm인 것으로 나타났다. SQ와 CMJ에서는 대퇴사두근의 최대 단축성 수축 속도와 대퇴이두근과 내외측 비복근의 최대 신장성 수축이 공중동작이 발생하기 바로 전에 이루어졌다. 대퇴사두근의 최대 신장성 수축과 대퇴이두근과 내외측 비복근의 최대 단축성 수축은 일반적으로 피험자가 착지하는 순간에 발생되어졌다. 그러나 HJ와 DJ에서는 대퇴사두근의 최대 신장성 추축과 대퇴이두근과 내외측 비복근의 최대 신장성 수축이 하강기 초반에 발생되어졌다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.2
• /
• pp.149-154
• /
• 2013

This study was performed to develop a high efficiency submersible axial pump for concentration wastewater treatment. To do this, we simulated the effect of some parameters such as the axial twist angle of a blade(${\beta}$), the radial twist angle of a blade(${\alpha}$) and the length of a blade (l) on pump efficiency using commercial code, ANSYS CFX and BladeGen. The results showed that the axial twist angle of a blade(${\beta}$) was the most sensible parameter on the pump efficiency. And the pump efficiency had a maximum at ${\beta}=20^{\circ}$, ${\alpha}=110^{\circ}$ and l=240 mm.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1002-1006
• /
• 2002

Germination method was used to screen the biological changes in soybean, kidney bean, and red bean caused by gamma irradiation. Beans were irradiated at 0.1, 0.3, 0.5, 0.7, and 1.0 kGy. Ten beans of each sample were placed on moistened cotton and germinated at $30{\circ}C$. The root lengths were measured daily for 5 days. Root lengths of all beans grew continuously for 5 days, but the growth rate of irradiated beans decreased significantly from fourth day. Unirradiated beans showed the highest growth rate during 5 days of germination. Gamma-irradiated beans could be screened by measuring the daily growth rate and root length during germination.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3983-3990
• /
• 2012

The hazardous effects of heavy alcohol intake and smoking to body systems have been identified by numerous studies, and there is many influencing factors on alcohol intake and smoking choices. The aim of this study is to identify the correlation between alcohol intake and digit ratio (2D:4D), as well as smoking and digit ratio (2D:4D) in university students. Participants were 121 male and 314 female university students. After filling in questionnaire related alcohol and smoking history, 2nd and 4th finger lengths were measured on both hands using vernier callipers with photocopy. This study showed 2D:4D of the males was 0.95, and that of the females was 0.96. There was a significant difference between male and female in digit ratio. The digit ratio according alcohol intake level significantly differed in only women's left hand. The digit ratio according smoking level significantly differed in only men's left hand. Moreover, The digit ratio was negatively associated with alcohol intake and smoking. The results of this study suggest that the digit ratio (2D:4D) affected with fetal testosterone concentration is negatively related to alcohol intake and smoking. Therefore, the digit ratio would be used in preventive program of alcohol intake and smoking of adolescent, or in antialcoholism /smoking cessation program as a biological basic data.

• Korean Journal of Plant Taxonomy
• /
• v.31 no.4
• /
• pp.359-373
• /
• 2001

One of Korean Typha species has been used two scientific names, T. angustifolia L. and T. angustata Bory et Chaubard without taxonomic examinations. Typha angustifolia has a longer females flowers than bracteoles and equal length of bracteoles and hairs in female flowers whereas T. angustata has equal length of female flowers and bracteoles and longer bracteloes than hairs in female flowers. In this study, the pattern of morphological variation of T. angustifolia in Korea is examined using numerical analysis to determine their taxonomical identities. Univariate analysis using morphological characters such as female flower length/bracteole length and bracteole lengh/hair length reveals that Korean T. angustifolia is composed of one group. The result of principal components analysis shows that Korean T. angustifolia is closely related to T. angustifolia distributed in Japan, Russia, and USA. Therefore, T. angustifolia L. (in Korea) is suggested as a legitimate scientific name.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.933-937
• /
• 2011

In order to determine optimal design length of adhesive joint of a composite pressure vessel with separated dome, stress analysis of joint part according to changes of adhesive length was done. Adhesive length has a range of 50mm to 300mm as design variables. The ratio of adhesive length with any stress gradient to initial non-stressed adhesive length was called "stress gradient length ratio" and selected as objective function. The stress gradient length ratio of joint part with adhesive length of more than 200mm was increased very slowly with increase of adhesive length. It means that adhesive length of about 200mm could be the optimal value to ensure the structural safety of joint part against internal pressure of 2,500 psi.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.97-100
• /
• 2005

우리는 페이딩 환경에서 비동기 블록 수신 CPFSK에 적용되는 TCM의 성능을 분석하였다. 여기서 비동기 블록 수신기는 N개의 심볼을 하나의 블록으로 취급하여 비동기 복조를 수행한다. 일반적으로 이러한 블록 수신 방식은 관찰 블록의 길이가 길어질수록 더 좋은 성능을 나타낸다. 그러나 페이딩의 응집 시간이 수신기의 관찰 블록 길이 보다 작아지면, 블록 수신기의 오류 성능은 매우 나빠지게 된다. 본 논문에서는 페이딩의 응집 시간이 수신기의 관찰 블록 시간 NT(여기서, T는 심볼 시간)보다 큰 환경을 저속 페이딩 환경 이라고 하고, 그렇지 않은 환경을 고속 페이딩 환경이라고 정의하여, 각각의 환경에서 시스템의 성능을 분석하였다. 그 결과 고속 페이딩 환경에서 비동기 블록 수신기의 사용은 오류 층(error floor) 현상을 초래한다는 사실을 알 수 있었다. 따라서 고속 페이딩 환경에서는 수신기의 관찰 블록 길이를 짧게 하는 것이 더 좋다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.738-740
• /
• 2012

최근 변단면 거더의 경제성을 고려하여 장경간 거더 교량과 강골조 구조물에 변단면보의 사용이 증가하고 있으며, 고강도 강의 등장으로 인해 변단면보의 정확한 좌굴 강도의 평가가 매우 중요시 되고 있다. 본 논문에서는 기존에 연구된 탄성 횡-비틀림 좌굴 강도에 관한 연구를 바탕으로하여 별로 비탄성 구간에 비지지 길이가 존재하는 일축대칭 I형 변단면보의 횡-비틀림 좌굴 강도 해석을 실시하였다. 해석에는 유한요소해석프로그램인 ABAQUS(2007)가 사용되었으며, MINITAB(2006)을 이용하여 간편한 설계식을 제안하고 있다. 일단 계단식 단면을 가지는 보에 대하여 고려하였으며, 플랜지 길이 방향 비, 너비방향 비, 두께의 비로 계단식 I형 보를 나타내었다. 집중 하중을 적용시켰으며 비선형 해석을 위해 잔류응력 및 초기변형과 재료비선형을 고려하였다. 본 연구 결과에서 제안된 식은 향후 다양한 하중이 작용하는 비탄성 횡-비틀림 좌굴 강도에 대한 연구에 많은 도움이 될 것이다.