• Journal of the Korean Vacuum Society
• /
• v.4 no.4
• /
• pp.343-349
• /
• 1995

게데형 분자드래그펌프의 배기특성을 강구(hard sphere)분자모델과 NTC(No Time Counter)충돌 scheme을 이용한 직접모사 법의 하나인 DSMC(direct simulation Monte Carlo)방법을 이용하여 해석하였다. 해석에 사용된 모델은 높이가 일정하고, 길이가 높이의 1~3000배 사이인 이차원 채널이다. 자유분자영역으로부터 연속체 영역까지의 영역에서 최대압축비와 배기속도를 계산하였다. 계산결과 기존의 최대압축비 이론 결과는 채널내의 압력변화가 클 때는 큰 오차를 유발하는 것을 알 수 있었고, 유동방향의 기체분자의 통과확률은 채널 길이와 출구압력에 관계없이 거의 일정한 값을 갖는다는 것을 발견하였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.180-185
• /
• 2002

본 연구에서는 선행연구에서 개발한 식물공장 시스템을 확장하여 가상의 식물공장을 설계하고 운영하는 시뮬레이션을 수행하였으며 그 결과는 다음과 같다. 1. 식물공장의 개별 장치들의 성능과 크기에 관한 수학적 모델을 구하였으며 작물의 로지스틱 생장 모델에 따라 재배장치를 배열하였다. 2. 동일조건 하에서 여러 가지 변수를 변화시키며 식물공장의 면적, 재배장치의 길이 등을 시뮬레이션 해보았으며 또한 식물공장의 연간 고정비 및 소득도 비교했다. 3. VRML을 이용하여 3차원 컴퓨터 그래픽을 이용한 가상의 식물공장을 만들어 사용자가 가상현실 속에서 둘러볼 수 있었으며, 가상 식물공장은 인터넷을 통해 WWW으로 제공할 수 있었다.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.5
• /
• pp.51-63
• /
• 2023

Numerical analysis was conducted to determine the effect of soil behavior by thawing and freezing of seasonal frozen soil on pile foundations. The analysis was performed using the finite element method (FEM) to simulate soil-pile interaction based on the atmosphere temperature change. Thermomechanical coupled modeling using FEM was applied with the temperature-dependent nonlinear properties of the frozen soil. The analysis model cases were applied to the MCR and HDP models to simulate the elastoplastic behavior of soil. The numerical analysis results were analyzed and compared with various conditions having different length and width sizes of the pile. The results of the numerical analysis showed t hat t he HDP model was relat ively passive, and t he aspect and magnit ude of t he bearing capacit y and displacement of the pile head were similar depending on the length and width of the pile conditions. The vertical displacement of the pile head by thawing and freezing of the ground showed a large variation in displacement for shorter length conditions. In the MCR model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0387 and 0.0277 m, respectively. In the HDP model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0367 and 0.0264 m, respectively. The results of the pile bearing capacity for the two elastoplastic models showed a larger difference in the width condition than the length condition of the pile, with a maximum of about 14.7% for the width L condition, a maximum of about 5.4% for M condition, and a maximum of about 5.3% for S condition. The significance of the effect on the displacement of the pile head and the bearing capacity depended on the pile-soil contact area, and the difference depended on the presence or absence of an active layer in the soil and its thickness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.1-6
• /
• 2017

Stents are widely used as the most common method of treating coronary artery disease with implants in the form of a metal mesh. The blood flow is normalized by inserting a stent into the narrowed or clogged areas of the human body. In this study, the mechanical characteristics of a stent are investigated according to the variations of its design parameters by the Taguchi method and finite element analysis. A stent model of the Palmaz-Schatz type was used for the analysis. In the analysis, an elasto-plastic material model was adopted for the stent and a hyper-elastic model was used for the balloon. The main interest of this study is to investigate the effects of the design parameters which reduce the possibility of restenosis by adjusting the recoil amount. A Taguchi orthogonal array was constructed on the model of the stent. The thickness and length and angle of the slot were selected as the design parameters. The amounts of radial recoil and longitudinal recoil were calculated by finite element analysis. The statistical analysis using the Taguchi method showed that optimizing the shape of the stent could reduce the possibility of restenosis. The optimized shape showed improvements of recoil in the radial and longitudinal directions of ~1% and ~0.1%, respectively, compared to the default model.

• Journal of Navigation and Port Research
• /
• v.31 no.8
• /
• pp.697-703
• /
• 2007

In this paper, we focuses on the development of Takagi-Sugeno (T-S) fuzzy modeling in a nonlinear container crane system. A T-S fuzzy model is characterized by fuzzy "if-then" rules which represent the locally input-output relationship whose consequence part is described by a state space equation as subsystem. The T-S fuzzy model in container cranes first obtains a few number of linear models according to operation conditions and blends these conditions using fuzzy membership functions. Parameters of the membership functions are adjusted by a RCGA to have same dynamic characteristics with nonlinear system of a container crane. Simulations are given to illustrate the performance of T-S fuzzy model.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.133-140
• /
• 2008

In this paper, we analyzed the accuracy of orbit modeling with various control point configurations and adjustment unknown parameter sets. We used 152 GCP points acquired from GPS surveying, which were distributed from Choon-chun to Nha-ju along 420km in distance. For orbit modeling, seven adjustment parameter sets were chosen to include parameters for satellite position, velocity and attitude angles at different degree of freedom. Firstly we determined the location of model point in seven configurations. Secondly we estimated model parameters for each parameter set and for each GCP configurations. Finally we applied the model to reference check points and analyzed its accuracy. We were able to find the unknown parameter set that produce best orbit modeling performance regardless of the configuration of model points.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.328-333
• /
• 2007

In this paper, we describe characteristics of a movable bridge called the Anjok and propose an improved string model which has delay line controller in physical modeling of the Gayageum. Movable bridge, the Anjok determines the length of vibrating string and transmits the vibration of each string to the body of the Gayageum. We analyze the variations in frequency domain and implement the Anjok model as parametric form using the first-order polynomial fitting in logarithmic scale graph, because the length of string changes fundamental frequency. In order to implement the Anjok model, frequency fitting, tension fitting and frequency fitting using leaky integrator are used. The frequency fitting using leaky integrator has the best results among those. Proposed string model with the Anjok model can represent real tuning system of the real Gayageum and the proposed model could synthesize sounds which is similar to original sounds.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.301-304
• /
• 2002

본 논문은 한국인 피험자를 대상으로 이루어진 어절 재인 실험 시 관찰된 언어 현상인 길이 효과, 빈도 효과, 그리고 이웃 효과를 설명할 수 있는 한국어 어절 재인 시뮬레이션 모델을 제안한다. 제안한 모델은 코퍼스에서 나타난 어절의 빈도를 이용하여 정렬한 트라이(trie) 구조를 기반으로 하고 있다. 본 모델은 피험자들의 어절 재인 현상을 모두 설명할 수 있으며 피험자들을 대상으로 한 실험에서 사용한 동일 자료를 이용하여 시뮬레이션한 결과 유의미한 상관 관계를 보였다. 현재 시뮬레이션 중 발견된 언어 현상이 한국인 피험자에서도 나타나는지를 규명하기 위한 실험과 영어 단어 재인시의 언어 현상에 대해서도 적용할 수 있는 확장 방안에 대하여 연구를 수행하고 있다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.187-194
• /
• 2005

The objective of this study is to validate the hybrid breakup model and the vaporization model for GDI spray analysis at vaporization and non-vaporization conditions. The atomization process is modeled by using hybrid breakup model that is composed of Linearized Instability Sheet Atomization (LISA) model and Aerodynamically Progressed Taylor Analogy Breakup (APTAB) model. The vaporization process is modeled by using modified Abramzon & Sirignano model. The exciplex fluorescence method was used for comparing the calculated results with the experimental ones. The experiment and the calculation were performed at the ambient pressures of 0.1 MPa, 0.5 MPa and 1.0 MPa and the ambient temperature of 293K and 473K.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1629-1632
• /
• 2004

입체는 특수 장비에 의해 디지털 데이터화 되어 3차원 물체의 표면을 메쉬나 다각형 등으로 표현하며 입체의 세부구조인 다각형은 면적, 각 정점의 토폴로지, 변의 길이, 내각과 같은 고유 기하정보 요소를 가진다. 본 연구에서는 3차원 입체를 특징짓는 다각형의 기하학적 정보를 이용하여 3차원 모델을 2차원 평면으로 전개하는 방법을 제안한다. 이와 같은 기술은 옷이나 신발과 같은 2차원 형태의 부품을 결합하여 입체형태의 제품을 만들어 내는 분야에 매우 유용하게 쓰이며 나아가 3차원 모델에 최소의 왜곡을 가지는 텍스쳐를 적용시켜 3차원 모델의 사실성을 높이는데 기여할 수 있다.