• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.11a
• /
• pp.48-52
• /
• 2000

본 연구에서는 긴장 스트레스를 평가하기 위하여 작업 중에 긴장 조건을 부가하고 행동량, 주관량, 생리량을 계측하여 통계적으로 긴장 상태 유무와 작업 난이도에 따른 변화를 분석하였다. 긴장 스트레스를 유발시키기 위하여 20대 남자 대학생 3D명에게 세 가지 레벨의 트랙킹 작업을 수행하게 하면서 긴장상태를 유발하여 행동량, 주관신고와 생리신호를 측정하였다. 행동량과 주관신고의 결과를 사용하여 본 연구에서 상정된 작업난이도와 긴장조건이 적절한 가를 살펴보고 생리신호를 사용하여 작업난이도와 긴장감을 분석하였다. 난이도가 낮을 때 HRV의 회귀도와 GSR의 평균값은 긴장 조건이 있을 때가 없을 때에 비해서 통계적으로 유의하게 높게 나타났으며 난이도가 높을 때에는 피부온도의 값이 긴장 조건이 있을 때가 없을 때에 비해서 통계적으로 유의하게 높게 나타났다. 또한 긴장 조건이 있는 경우 작업의 난이도가 높을 때에 낮을 때에 비해서 호흡수의 값이 높게 나타났다. 따라서, 본 연구에서 상정한 긴장감은 양호하게 부가되었고 긴장감은 생리신호를 사용하여 측정할 수 있을 것으로 분석되었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.352-355
• /
• 2010

본 논문에서는 내부 및 외부 긴장재로 보강된 PSC 거더의 가속도 응답 특성을 이용한 구조건전성 모니터링을 위해 실험 및 수치해석 결과를 비교 분석하는 연구를 수행하였다. 첫 번째로, 내부 및 외부 긴장재로 보강된 모형 PSC 거더를 제작하였다. 두 번째로, 모형 PSC 거더의 형상, 재료 및 경계조건과 긴장재의 배치를 고려하여 초기 유한요소모델을 설계하였다. 세 번째로, 다수의 내부 및 외부 긴장력 조건하의 모형 PSC 거더에 대한 동특성 추출 실험 및 수치해석을 수행하였다. 마지막으로, 실험결과와 수치해석 결과를 비교 분석하여 가속도 응답 특성을 이용한 내부 및 외부 긴장재로 보강된 PSC 거더의 구조건전성 모니터링에 대한 적용성을 검토하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.8-15
• /
• 2018

An experiment was carried out to evaluate the lateral torsional stability of a girder with respect to the location and magnitude of prestressing force. The test of evaluating the lateral displacement and stability of a girder could cause an unexpected result due to various parameters, such as material nonlinearity, initial geometric imperfections, prestressing force, and loading and support conditions. Therefore, a small model testing was programmed to control the various parameters and assess the lateral torsional stability with respect to the prestressing force. This study proposed and fabricated an experimental apparatus that can satisfy the loading and in-plane and out-of-plane support conditions and also contol the prestressing force. The result of the experiment showed that the lateral torsional stability increased when the prestressing force was applied in the bottom flange of the girder. As a result, this study proposed an analytical equation that can account for the effect of the prestressing force in the lateral torsional stability of a girder.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.39.2-39.2
• /
• 2010

본 논문에서는 프리스트레스트 콘크리트 거더 구조물의 긴장력 손실을 검색하기 위한 유한요소모델 개선기법을 제시하였다. 먼저, 유한요소모델개선 기법의 이론적 배경을 제시하였다. 두 번째로, 다수의 긴장력 조건하의 모형 PSC 거더에 대한 모드파라메터들을 측정하기위해 진동실험을 수행하였다. 세 번째로, 유한요소모델의 구조파라메터 개선을 통해 실험결과와 유사한 고유진동수를 얻기 위한 진동기반 구조식별을 수행하였다. 마지막으로, 다수의 긴장력 조건하에서 실험을 통해 측정된 고유진동수와 수치적으로 식별된 고유 진동수를 이용하여 모델개선 기법의 적합성을 검증하였다.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.424-433
• /
• 2015

This study tried to investigate the differences between auditory preferences for a discrimination study of minimal pairs with the different onset and the same nucleus of a syllable on the basis of articulator-distance in case of Korean infants and toddlers. As a result we found a main effect for articulator-distance and age but not an effect according to the types of phonation especially in terms of tense. Former results are line with the previous studies having reported the order of consonants acquisition based on the places of articulation suggesting that more sensitive responses for the contiguous and different phonemes may lead earlier acquisition for the same place of articulation of the speech sounds. Specifically, bilabial soudns are followed by alveolar and palatal sounds in order. The latter results also showed that tense consonants got a high rate of recognition beside lax consonants according to the age and sex.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.203-215
• /
• 2009

This study was conducted to develop the design methodology of longitudinal post tensioning for the post-tensioned concrete pavement (PTCP). The longitudinal stress distribution in the PTCP slab was analyzed when post tensioning was applied. Then, the tensile stress distribution in the PTCP slab due to the environmental and vehicle loads needed for the design was investigated. In addition, prestress losses were calculated considering the losses due to the frictional resistance between the slab and underlying layer and due to various reasons related to tensioning. The tensile stresses used for the design were obtained by adding the stresses from the critical conditions under both the environmental and vehicle loads. The prestress losses were obtained by considering actual field conditions. The effective post tensioning amount was determined by considering the design loads including environmental and vehicle loads and various losses, and the effect of the allowable tensile stress on the post tensioning amount was investigated. The initial stage of the design of the longitudinal post tensioning is to obtain the stresses under the design loads and the required prestress determined by subtracting the allowable tensile stress from the design stress. Then, the optimal tendon spacing and the tensioning amount can be obtained by comparing with the effective tensioning amount including various stress losses.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.115-124
• /
• 2006

The 1st and 2nd tension forces of the PSSC(Prestressed Steel and Concrete) grider constructed with commercial rolling beams and concrete are optimally designed. The design variables are the 1st and 2nd tension forces due to multi-step prestressing and live load. The objective function is set to the maximum live load. Design conditions are allowable stresses at the top and bottom of slab, beam and infilled concrete due at the several construction stages. A Matlab based optimization program is developed. The results show that the tendon position as well as concrete compression strength have significant influence on the beam strength.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.149-153
• /
• 2018

The purpose of this study is to actively utilize the type of tension of Sijo in literary therapy programs. I will examine the Sijo of the Bang-yeon Wang. The Sijo of the Bang-yeon Wang is not known much yet, so we will discuss it. The Sijo of the Bang-yeon Wang has the effect of conveying the meaning while the modifier tensions the next sentence. This literary framework can be useful for literary therapy programs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.3
• /
• pp.323-331
• /
• 2022

An experimental study was conducted to investigate the effect of applied tensile force and temperature on the permeability of magnetic flux in prestressing steel. The permeability of magnetic flux is the ratio at which the magnetic flux between two points passes. The prestressing steel used in these experiments included a 7-mm PS wire mainly used for cable-stayed bridges and a 12.7-mm PS strand for prestressed concrete bridges. The experiments to extract the permeability of the magnetic flux of steel wire and strand were conducted under various tensile levels and temperature conditions. From the experimental results, it was observed that the permeability of magnetic flux of the PS tension material was linearly proportional to the applied tensile stress level, and inversely proportional to the temperature. If the experimental relationship among the magnetic permeability, temperature, and prestressing ratio of a PS tension material is known in advance, the current tension stress level on PS members can be evaluated by measuring solely the magnetic permeability and temperature.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.281-291
• /
• 2002

This paper describes the minimum cost design of prestressed reinforced concrete (PRC) hem with rectangular section. The cost of construction as objective function which includes the costs of concrete, prestressing steel, non prestressing steel, and formwork is minimized. The design constraints include limits on the minimum deflection, flexural and shear strengths, in addition to ductility requirements, and upper-Lower bounds on design variables as stipulated by the specification. The optimization is carried out using the methods based on discretized continuum-type optimality criteria(DCOC). Based on Kuhn-Tucker necessary conditions, the optimality criteria are explicitly derived in terms of the design variables - effective depth, eccentricity of prestressing steel and non prestressing steel ratio. The prestressing profile is prescribed by parabolic functions. In this paper the effective depth is considered to be freely-varying and one uniform for the entire multispan beam respectively. Also the maximum eccentricity of prestressing force is considered in every span. In order to show the applicability and efficiency of the derived algorithm, several numerical examples of PRC continuous beams are solved.