Browse > Article
http://dx.doi.org/10.12652/Ksce.2022.42.3.0323

Permeability of Magnetic Flux of PS Steel for Variation of Stress and Temperature  

Park, Jin Su (Kyungnam University)
Kim, Byeong Hwa (Kyungnam University)
Publication Information
KSCE Journal of Civil and Environmental Engineering Research / v.42, no.3, 2022 , pp. 323-331 More about this Journal
Abstract
An experimental study was conducted to investigate the effect of applied tensile force and temperature on the permeability of magnetic flux in prestressing steel. The permeability of magnetic flux is the ratio at which the magnetic flux between two points passes. The prestressing steel used in these experiments included a 7-mm PS wire mainly used for cable-stayed bridges and a 12.7-mm PS strand for prestressed concrete bridges. The experiments to extract the permeability of the magnetic flux of steel wire and strand were conducted under various tensile levels and temperature conditions. From the experimental results, it was observed that the permeability of magnetic flux of the PS tension material was linearly proportional to the applied tensile stress level, and inversely proportional to the temperature. If the experimental relationship among the magnetic permeability, temperature, and prestressing ratio of a PS tension material is known in advance, the current tension stress level on PS members can be evaluated by measuring solely the magnetic permeability and temperature.
Keywords
Permeability of magnetic flux; Prestressed concrete; Strand; Prestress;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Dang, N. L., Huynh, T. C. and Kim, J. T. (2019). "Local strand-breakage detection in multi-strand anchorage system using an impedance-based stress monitoring method-feasibility-study." Sensors, Vol. 19, No. 5, pp. 1054.   DOI
2 Instron (2012). Instron 4485, Available at: https://www.instron.com/en/ (Accessed: November 19, 2021).
3 JKCORP (2021). Outlet type digital thermostat, Available at: https://smartstore.naver.com/_jkcorporation (Accessed: November 19, 2021).
4 Chen, D., Zhang, B., Li, X., Tu, C., Yuan, C., Li, W., Zhou, Z. and Liang, Z. (2018). "A stress measurement method for steel strands based on LC oscillation." Advances in Materials Science and Engineering, Vol. 2018, pp. 1-8.
5 Griffiths, D. J. (2019). Introduction to electrodynamics, Bookshill.
6 Hiba, A. J. and Branko, G. (2019). "Monitoring of prestressing forces in prestressed concrete structures-An overview." Structural Control Health Monitoring, Vol. 26, No. 8, pp. 1-27.
7 Jeon, K. Y., Kwon, S. H., Kim, K. D., Baek, J. B., Kim, J. K. and Park, S. H. (2019). "Monitoring method for pre-stressing temporary steel bar of FCM using EM sensor." Journal of the Korean Society of Civil Engineers, KSCE, Vol. 67, No. 12, pp. 76-82.
8 Kim, B. H., Joh, C. B. and Lee, D. H. (2013). "A feasibility study for estimating prestressed stress on a steel wire Using permeability of magnetic flux." Journal of the Earthquake Engineering Society of Korea, Vol. 17, No. 93, pp. 219-225.   DOI
9 Kim, D. H., Hong, Y. K., Seo, D. W. and Jung, S. K. (2021). "Safety diagnosis and evaluation technique for PSC bridges using acoustic emission technique." Journal of the Korean Society for Nondestructive Testing, Vol. 41, No. 1, pp. 25-38.   DOI
10 Kim, D. H., Hong, Y. K., Seo, D. W. and Kim, J. H. (2019b). "Fracture behavior of internal tendon in PSC structure using acoustic emission technique." Journal of the Korean Society for Nondestructive Testing, Vol. 39, No. 6, pp. 362-368.   DOI
11 Kim, K. J., Park, Y. S. and Park, S. W. (2020). "Development of artificial neural network model for estimation of cable tension of cable-Stayed bridge." Journal of the Korea Academia-Industrial Cooperation Society, Vol. 21, No. 3, pp. 414-419.   DOI
12 Kim, J. K., Park, J. Y., Zhang, A., Lee, H. W. and Park. S. H. (2015a). "Prestressing loss management for PSC girder tendon based on EM sensing." Journal of the Computational Structural Engineering Institute of Korea, Vol. 28, No. 4, pp. 369-374.   DOI
13 Kim, S. T., Park, Y. H., Park, S. Y., Cho, K. H. and Cho, J. R. (2015b). "A sensor-type PC strand with an embedded FBG sensor for monitoring prestress forces." Sensors, Vol. 15, No. 1, pp. 1060-1070.   DOI
14 Kim, H. W., Kim, J. M., Choi, S. Y., Park, S. Y. and Lee, H. W. (2015c). "Long term monitoring of prestressing tension force in post-tension UHPC bridge using fiver optical FBG sensor." Journal of the Computational Structural Engineering Institute of Korea, Vol. 28, No. 6, pp. 669-706.
15 Li, X., Zhang, B., Yuan, C., Tu, C., Chen, D., Chen, Z. and Li, Y. (2018). "An electromagnetic oscillation method for stress measurement of steel strands." Measurement, Vol. 125, pp. 330-335.   DOI
16 Kim, B. H. and Park, T. H. (2007). "Estimation of cable tension force using the frequency-based system identification method." Journal of Sound and Vibration, Vol. 304, No. 3-5, pp. 660-676.   DOI
17 Kim, D. H., Hong, Y. K., Seo, D. W. and Park, T. K. (2019a). "Integrity evaluation technology of PSC bridge tendons using acoustic emission technique." Journal of the Korean Society for Nondestructive Testing, Vol. 39, No. 1, pp. 37-44.   DOI
18 KONGSUNG (2021). W-80-HOT-JET, Available at: http://www.kongsung.net/ (Accessed: November 19, 2021).
19 National Instruments (2012). NI9239, Available at: https://www.ni.com/ko-kr.html (Accessed: November 19, 2021).
20 Park, J. H., Kim, J. K., Eum, K. Y. and Park, S. H. (2019). "Low-voltage EM (Elasto-Magnetic) sensing technique for tensile force management of PSC (Prestressed Concrete) internal tendon." Journal of the Computational Structural Engineering Institute of Korea, Vol. 32, No. 2, pp. 87-92.   DOI
21 Ryu, J. Y., Huynh, T. C. and Kim, J. T. (2019). "Tension force estimation in axially loaded members using wearable piezoelectric interface technique." Sensors, Vol. 19, No. 1, pp. 47.   DOI
22 Na, W. S. and Baek, J. D. (2018). "A review of the piezoelectric electromechanical impedance based structural health monitoring technique for engineering structures." Sensors, Vol. 18, No. 5, pp. 1307.   DOI
23 Nguyen, D. H. and Kim, B. H. (2020). "Experimental relationship between electrical impedance of a steel wire and applied stress, temperature, and excited frequency." Journal of the Korean Society of Civil Engineers, KSCE, Vol. 40, No. 2, pp. 183-189.   DOI
24 Park, J. H., Hong, D. S., Kim, J. T., Na, W. B. and Cho, H. M. (2010). "A study on applicability of wireless impedance sensor nodes technique for tensile force monitoring of structural cables." Joural of Korean Society of Steel Construction, Vol. 22, No. 1 pp. 21-31.
25 Shen, S., Wang, Y., Ma, S. L., Huang, D., Wu, Z. H. and Guo, X. (2018). "Evaluation of prestress loss distribution during pre-tensioning and post-tensioning using long-gauge fiber bragg grating sensors." Sensors, Vol. 18, No. 12, pp. 4106.   DOI
26 Zhu, X. and Scalea, F. L. (2016). "Sensitivity to axial stress of electro mechanical impedance measurements." Experimental Mechanics, Vol. 56, No. 9, pp. 1599-1610.   DOI
27 KIKUSUI (2020). PCR-500M, Available at: https://www.kikusui.co.jp/en/ (Accessed: November 19, 2021).
28 Zhang, B., Tu, C., Li, X., Cui, H. and Zheng, G. (2019). "Length effect on the stress detection of prestressed steel strands based on electromagnetic oscillation method." Sensors, Vol. 19, No. 12, pp. 2782.   DOI