• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.308-316
• /
• 2019

Electron beam physical vapor deposition (EBPVD) is a conventional method to fabricate thermal barrier coating (TBC) of high temperature airfoil engine parts, such as blade etc. for its high temperature structural stability from the nature of columnar growth behavior. For the high quality of TBC by EBPVD, the structural factors, such as growth behavior, thickness uniformity and so on, should be managed to obtain the coating which satisfied the required specifications of usable level of mechanical and thermal properties. In this study, the growth behavior and structure variations of 7YSZ (7 wt% yttria stabilized zirconia) coatings with different configurational deposition parameters for the specimens which have turbine blade shape mock-up were investigated. Growth behavior of coatings were studied by comparing computational modeling of evaporation behavior with actual deposition process using e-beam source.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.203-209
• /
• 2008

Nowadays the risk of radiation is getting more serious, so we must know the exact dose that was irradiated, Because very high radiation dose is used in radiation therapy field. We used the ionization chamber which measure the radiation dose in this study. We tried to know the incorrect result from the distortion of geometric structure of ionization chamber and we studied how to find the distortion of geometric structure of ionization chamber. We used a radio fluoroscopy to find the wound degree of electrode of ionization chamber and a reconstructed 3D CT image to analyze the wound degree of electrode quantitatively. we measured degree of distortion by comparing with absorbed dose of normal electrode and wound electrode. The comparative result is not absolute dosimetry at specific point but relative dosimetry between thats. We measured 4 MV, 10MV photon with same absorbed dose and dose rate. The degree of distortion of wound electrode was totally $5.5{\sim}7.2%$, and there was no difference between two energies. The variation induced from radiation dose to be irradiated and dose rate, and the degree of distortion from wound direction also was almost similar value. We could find that the geometric structure of ionization chamber that can influence a basic measurement of radiation dose can be changed by old usage and inattention of management in this study, especially winding of electrode can be happened, in radiation therapy field, It is very important to keep precise radiation dose quantitatively.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1245-1248
• /
• 2010

플라스틱은 가공이 용이하기 때문에 우리 생활에 널리 이용되고 있다. 과거에는 단순히 제품의 외장제로 이용되었지만 산업이 발달함에 따라 금속을 대체 할 정도로 사용 범위가 증가하고 있다. 또한 사용량이 증가함에 따라 제품의 생산량을 증가시키기 위해선 다수 캐비티의 금형 사용이 필수적으로 되었다. 다수 캐비티 사출성형에서 각 캐비티 간 제품의 품질 및 물성을 향상시키기 위해선 각 캐비티로 충전되는 수지가 균형을 이루어야 한다. 하지만 기하학적으로 균형을 갖추고 있는 러너를 설계하여도 실제 사출성형에서는 불균형 충전이 일어나게 된다. 이러한 불균형 충전은 미국의 Beaumont에 의해서 처음 규명된 뒤 충전불균형 현상을 해결하기 위해 많은 연구가 진행되었다. 본 논문에서는 다수 캐비티 사출성형에서 균형충전을 위한 러너시스템을 제안하였다. 이 러너시스템은 온도가 불균일한 수지의 흐름을 혼합함으로써 수지의 흐름을 균일하게 하여 균형충전을 이루도록 하였다. 또한 사출성형해석프로그램인 Moldflow를 이용한 유동해석을 통해 그 효과를 나타내 보았다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.551-553
• /
• 1999

최근에는 기하학적인 www의 성장과 더불어 인터넷 서비스를 통한 정보 획득과 고유, 교환 및 원격 시스템 접속을 통한 인터넷 응용 처리 서비스에 대한 연구가 많이 이루어지고 있다. 그리고 이를 기반으로 소프트웨어 생산성과 품질 향상을 위한 재사용을 이루기 위해 명확한 해결책으로 설계 패턴 재사용이 제시되었다. 그러므로 이들 설계 패턴을 웹을 기반으로 다수의 사용자가 융통성 있는 시스템 구축시 필요로 하는 패턴을 공유할 수 있는 적절한 설계 패턴 라이브러리 시스템이 요구되어졌다. 이는 웹 상에서 설계 패턴의 효율적인 검색과 의도된 패턴의 생성을 재사용 가능하도록 패턴 구조를 다운로드하고 보다 도메인 한정적인 응용 생산을 지원하고자 한다. 따라서 본 논문에서는 웹 상에서 설계 패턴 라이브러리를 ASP(Active Server Page)를 이용하여 구현하였다. 본 시스템을 통해 설계 패턴 재사용자들은 패턴을 등록, 수정, 삭제하고 또한 패턴을 대화적으로 검색하고 이해하며, 구조를 다운 받을 수 있다. 따라서 애플리케이션 시스템 구축에서 설계 패턴 사용자의 효율적인 방법을 제공한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.9
• /
• pp.903-912
• /
• 2009

This study is focused on simulation-based dimensional tolerance optimization process (DTOP) to minimize vehicle pulls by reduction of dimensional variation in front suspension system. In previous studies, the effect of tires and wheel alignment sensitivity have mainly been investigated to eliminate vehicle pulls in nominal design condition without allocating optimal tolerance level for selected components, among various factors regarding vehicle pulls such as vehicle design parameters, vehicle weight balance, tires, and environmental factors. Unfortunately, there are wide variations in the real vehicle, and these have impacted actual vehicle pulls, especially wheel alignment effects from suspension geometry variation has not been considered in the previous studies. In the tolerance design of suspension, tolerance variables with the uncertainty such as parts dimensional variation, assembly process, datum position and direction, and assembly tool tolerance has a great influence on the variation of the suspension dimensional performances. This study introduces total vehicle pull prediction model in considering major key factors for vehicle pull sensitivity. The Monte Carlo-based tolerance analysis model using Taguchi robust method is developed to optimize dimensional tolerance parameters, satisfying on the target variation level.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.17-27
• /
• 2002

It is desirable to use a photogrammetric scanner to minimize the errors from the scanning procedure in case of building aerial photo image DB. The photogrammetric scanner, however, is highly expensive to have only limited number of scanners available, therefore the general-purpose scanners have been considered as an alternative. This study has mainly been focused to see the possibility of the general-purpose scanner to be used for scanning aerial photographs. For that, the analysis of the image coordinates were made as well as the accuracy evaluation of each phase. In addition to that, as the application of the orthophoto images has been increased, the magnitudes of the errors from the DEM generation and orthophoto projection were analyzed. Also, the calibration program was developed to verify the geometric distortion of the automatic scanner to contribute to enhance the quality of the aerial photo image DB.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.881-891
• /
• 2020

Recently, the Ministry of Land, Infrastructure and Transport and the Ministry of Science and ICT are developing the Land Observation Satellite (CAS-500) to meet increased demand for high-resolution satellite images. Expected image products of CAS-500 includes precision orthoimage, Digital Surface Model (DSM), change detection map, etc. The quality of these products is determined based on the geometric accuracy of satellite images. Therefore, it is important to make precision geometric corrections of CAS-500 images to produce high-quality products. Geometric correction requires the Ground Control Point (GCP), which is usually extracted manually using orthoimages and digital map. This requires a lot of time to acquire GCPs. Therefore, it is necessary to automatically extract GCPs and reduce the time required for GCP extraction and orthoimage generation. To this end, the Precision Image Processing (PIP) System was developed for CAS-500 images to minimize user intervention in GCP extraction. This paper explains the products, processing steps and the function modules and Database of the PIP System. The performance of the System in terms of processing speed, is also presented. It is expected that through the developed System, precise orthoimages can be generated from all CAS-500 images over the Korean peninsula promptly. As future studies, we need to extend the System to handle automated orthoimage generation for overseas regions.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.871-877
• /
• 2006

물체의 반사(specular reflection)는 물체의 재질 및 기하학적 모양을 표현하는데 있어 매우중요한 요소이다. 사진품질의 사실적 렌더링에서는 기존의 국소 반사 모델을 사용하여 좋은 결과를 얻을 수 있지만, 사용자의 주관이 중시되는 비사실적 렌더링(non-photorealistic rendering)에서는 사용자가 원하는 반사 효과를 표현할 수 있어야 한다. 텍스처는 사용자가 직관적으로 원하는 반사 효과를 표현할 수 있는 수단이며, 이를 모델에 투영하면 원하는 반사효과를 얻을 수 있다. 이 때 사용자는 텍스처가 투영될 위치와 크기, 방향을 직접 키프레임으로 정해 줄 수 있다. 그러나 모든 반사 효과를 사용자가 직접 정해준다는 것은 번거로운 일이며, 실시간 응용분야에는 적용할 수 없다. 본 논문에서는 국소반사모델(local reflection model)과 주곡률(principal curvature) 해석을 통해 반사효과의 위치, 방향, 크기를 결정하기 위한 텍스처 투영기의 새로운 설정 방법을 제시한다. 광원과 시점 정보를 사용하여 투영기의 위치를 정하고 물체의 주방향(principal direction)과 곡률반지름(radius of curvature)을 이용하여 투영기의 방향과 투영 피라미드의 크기를 정한다 텍스처 투영기의 단순한 이동, 회전을 통하여 반사 영역의 이동, 회전 및 확대/축소가 가능하다. 본 논문에서 제시한 방법은 DirectX 9.0c와 프로그래이 가능한 셰이더 2.0을 사용하여 GeForce FX 7800 그래픽 카드에 구현되었다. 본 논문의 연구 결과는 게임과 같은 실시간 응용분야에 사용될 수 있으며, 실험 결과에 의하면 수천 개의 다면체 모델에 대한 렌더링을 실시간에 수행할 수 있다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.9 no.1 s.17
• /
• pp.27-38
• /
• 2001

The GIS construction project using the Digital Map has been progressed actively since the enforcement of NGIS project in 1995. But, the Digital Map actually can't use directly in building GIS because of many defects of the digital map such as geometric features errors(the overshoot/undershoot of line or the opening of polygon), non-topology etc. Many advanced countries in GIS has provided users Framework Data which is generated topology defined spatial relationships and used as a basic data of national geospatial information. In this study, we proposed the definition and the scope of Framework Data as a basemap of the Nation Geospatial Information and studied for the management and construction of the Transportation/Road Framework Data which is a core and basic data among them.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.17-25
• /
• 1996

The development of still video CCD cameras has simplified dramatically the digital imaging process. Still video cameras have flexibility that allows digital image acquisition and on-board image storage without being connected to a computer. The objective of this paper is to evaluate the performance of digital close-range photogrammetric system using the still video camera for dimensional inspection and structural monitoring being required in various industries. Some sub-pixel measurement techniques, which is indispensable for digital image measurement, were suggested. The author carried out the self-calibration of a high resolution DCS420 still video camera and then test application of a structure. The self-calibrating bundle adjustments resulted in object space accuracies which exceed 1 :46,000. It is ascertained that this digital close-range photogrammetric system has high accuracy potential and task effectiveness for industrial applications.