• Science of Emotion and Sensibility
• /
• v.1 no.1
• /
• pp.33-40
• /
• 1998

본 논문은 얼굴인식 분야에 있어서 필수 과정인 얼굴 및 얼굴의 주요소인 눈과 입의 추출에 관한 방법을 제시한다. 얼굴 영역 추출은 복잡한 배경하에서 움직임 정보나 색상정보를 사용하지 않고 통계적인 모델에 기반한 일종의 형찬정합 방법을 사용하였다. 통계적인 모델은 입력된 얼굴 영상들의 Hotelling변환 과정에서 생성되는 고유 얼굴로, 복잡한 얼굴 영상을 몇 개의 주성분 갑으로 나타낼 수 있게 한다. 얼굴의 크기, 영상의 명암, 얼굴의 위치에 무관하게 얼굴을 추출하기 위해서, 단계적인 크기를 가지는 탐색 윈도우를 이용하여 영상을 검색하고 영상 강화 기법을 적용한 후, 영상을 고유얼굴 공간으로 투영하고 복원하는 과정을 통해 얼굴을 추출한다. 얼굴 요소의 추출은 각 요소별 특성을 고려한 엣지 추출과 이진화에 따른 프로젝션 히스토그램 분석에 의하여 눈과 입의 경계영역을 추출한다. 얼굴 영상에 관련된 윤곽선 추출에 관한 기존의 연구에서 주로 기하학적인 모양을 갖는 눈과 입의 경우에는 주로 가변 템플릿(Deformable Template)방법을 사용하여 특징을 추출하고, 비교적 다양한 모양을 갖는 눈썹, 얼굴 윤곽선 추출에는 스네이크(Snakes: Active Contour Model)를 이용하는 연구들이 이루어지고 있는데, 본 논문에서는 이러한 기존의 연구와는 달리 스네이크를 이용하여 적절한 파라미터의 선택과 에너지함수를 정의하여 눈과 입의 윤곽선 추출을 실험하였다. 복잡한 배경하에서 얼굴 영역의 추출, 추출된 얼굴 영역에서 눈과 입의 영역 추출 및 윤곽선 추출이 비교적 좋은 결과를 보이고 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.1191-1194
• /
• 2022

인터넷의 발전으로 수많은 이미지와 비디오를 손쉽게 이용할 수 있게 되었다. 이미지와 비디오 데이터의 양이 기하급수적으로 증가함에 따라, JPEG, HEVC, VVC 등 이미지와 비디오를 효율적으로 저장하기 위한 부호화 기술들이 등장했다. 최근에는 인공신경망을 활용한 학습 기반 모델이 발전함에 따라, 이를 활용한 이미지 및 비디오 압축 기술에 관한 연구가 빠르게 진행되고 있다. NNIC (Neural Network based Image Coding)는 이러한 학습 가능한 인공신경망 기반 이미지 부호화 기술을 의미한다. 본 논문에서는 NNIC 모델과 인공신경망 기반의 초해상화(Super Resolution) 모델을 합동훈련하여 기존 NNIC 모델보다 더 높은 성능을 보일 수 있는 방법을 제시한다. 먼저 NNIC 인코더(Encoder)에 이미지를 입력하기 전 다운 스케일링(Down Scaling)으로 쌍삼차보간법을 사용하여 이미지의 화소를 줄인 후 부호화(Encoding)한다. NNIC 디코더(Decoder)를 통해 부호화된 이미지를 복호화(Decoding)하고 업 스케일링으로 초해상화를 통해 복호화된 이미지를 원본 이미지로 복원한다. 이때 NNIC 모델과 초해상화 모델을 합동훈련한다. 결과적으로 낮은 비트량에서 더 높은 성능을 볼 수 있는 가능성을 보았다. 또한 합동훈련을 함으로써 전체 성능의 향상을 보아 학습 시간을 늘리고, 압축 잡음을 위한 초해상화 모델을 사용한다면 기존의 NNIC 보다 나은 성능을 보일 수 있는 가능성을 시사한다.

• Annual Conference of KIPS
• /
• 2007.05a
• /
• pp.667-670
• /
• 2007

볼륨 데이터에 대한 압축 기법의 필요성은 데이터 용량의 증가와 네트워크 사용량의 증가와 함께 더불어 증가해 왔다. 현재에는 다양한 압축 기법이 개발돼 있으며, 사용자는 데이터 유형이나 응용 분야에 맞춰 압축 기법을 선택, 적용할 수 있다. 그러나 최근에는 응용 과학자들로부터 생성되는 데이터의 용량이 기하급수적으로 증가했는데, 이렇게 응용과학 분야에서 생성되는 데이터는 대부분 3차원 볼륨 데이터다. 2차원 이미지나 3차원 동영상 데이터의 경우에는 다양한 표준 압축 방식을 사용할 수 있지만 3차원 볼륨 데이터에 적용할 수 있는 방법은 한정돼 있으며, 특히 시간가변(time-varying) 볼륨 데이터에 대한 압축 표준은 거의 존재하지 않는다고 볼 수 있다. 본 논문에서는 시간가변 볼륨 데이터에 대한 압축 방식을 제안한다. 이 방식은 가시화를 목적으로 하는 시간가변 볼륨 데이터의 인코딩을 목적으로 하며, MPEG의 I-프레임과 P-프레임 개념을 사용해서 압축률을 높인다. 본 방식은 시간가변 부동 소수점 데이터(single precision floating-point data)로 구성된 시간가변 볼륨 데이터를 대상으로 하는데, 한 블록 단위의 무작위 복원을 지원하며 Daubechies 웨이블릿 필터와 프레임간의 상관 관계를 사용, 대형 시간가변 볼륨 데이터를 이미지 화질을 보존한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.81-99
• /
• 2020

Origin-destination data have been collected and utilized for demand analysis and service design in various fields such as public transportation and traffic operation. As the utilization of big data becomes important, there are increasing needs to store raw origin-destination data for big data analysis. However, it is not practical to store and analyze the raw data for a long period of time since the size of the data increases by the power of the number of the collection points. To overcome this storage limitation and long-period pattern analysis, this study proposes a methodology for compression and origin-destination data analysis with the compressed data. The proposed methodology is applied to public transit data of Sejong and Seoul. We first measure the reconstruction error and the data size for each truncated matrix. Then, to determine a range of principal components for removing random data, we measure the level of the regularity based on covariance coefficients of the demand data reconstructed with each range of principal components. Based on the distribution of the covariance coefficients, we found the range of principal components that covers the regular demand. The ranges are determined as 1~60 and 1~80 for Sejong and Seoul respectively.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1135-1147
• /
• 2021

In order to geometrically correct high-resolution satellite imagery, the sensor modeling process that restores the geometric relationship between the satellite sensor and the ground surface at the image acquisition time is required. In general, high-resolution satellites provide RPC (Rational Polynomial Coefficient) information, but the vendor-provided RPC includes geometric distortion caused by the position and orientation of the satellite sensor. GCP (Ground Control Point) is generally used to correct the RPC errors. The representative method of acquiring GCP is field survey to obtain accurate ground coordinates. However, it is difficult to find the GCP in the satellite image due to the quality of the image, land cover change, relief displacement, etc. By using image maps acquired from various sensors as reference data, it is possible to automate the collection of GCP through the image matching algorithm. In this study, the RPC of KOMPSAT-3A satellite image was corrected through the extracted matching point using the UAV (Unmanned Aerial Vehichle) imagery. We propose a pre-porocessing method for the extraction of matching points between the UAV imagery and KOMPSAT-3A satellite image. To this end, the characteristics of matching points extracted by independently applying the SURF (Speeded-Up Robust Features) and the phase correlation, which are representative feature-based matching method and area-based matching method, respectively, were compared. The RPC adjustment parameters were calculated using the matching points extracted through each algorithm. In order to verify the performance and usability of the proposed method, it was compared with the GCP-based RPC correction result. The GCP-based method showed an improvement of correction accuracy by 2.14 pixels for the sample and 5.43 pixelsfor the line compared to the vendor-provided RPC. In the proposed method using SURF and phase correlation methods, the accuracy of sample was improved by 0.83 pixels and 1.49 pixels, and that of line wasimproved by 4.81 pixels and 5.19 pixels, respectively, compared to the vendor-provided RPC. Through the experimental results, the proposed method using the UAV imagery presented the possibility as an alternative to the GCP-based method for the RPC correction.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.49-58
• /
• 2016

Applications of drone in various fields have been increasing in recent years. Drone has great potential for forest management. Therefore this paper is using drone for forest damage areas. Forest damage areas is divided into caused by anthropogenic and occurs naturally, the possibility of disasters, such as slope sliding, slope failures and landslides, sediment runoff exists. Therefore, this research was to utilize the drone photogrammetry to perform the damage analysis of forest damage areas. Geometrical treatment processing results in Drone Photogrammetry, the plane position error RMSE was ${\pm}0.034m$, the elevation error RMSE was ${\pm}0.017m$. The plane position error of orthophoto RMSE was ${\pm}0.083m$, the elevation error of digital elevation model RMSE was ${\pm}0.085m$. In addition, It was possible to current state analysis of damage in forest damage areas of airborne LiDAR data of before forest damage and drone photogrammetry data of after forest damage. and application of drone photogrammetry for production base data for restoration and design in forest damage areas.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.677-686
• /
• 2014

This paper analyzes the 3D accuracy of stereo images captured from a mobile phone. For 3D accuracy evaluation, we have compared the accuracy result according to the amount of the convergence angle. In order to calculate the 3D model space coordinate of control points, we perform inner orientation, distortion correction and image geometry estimation. And the quantitative 3D accuracy was evaluated by transforming the 3D model space coordinate into the 3D object space coordinate. The result showed that relatively precise 3D information is generated in more than $17^{\circ}$ convergence angle. Consequently, it is necessary to set up stereo model structure consisting adequate convergence angle as an measurement distance and a baseline distance for accurate 3D information generation. It is expected that the result would be used to stereoscopic 3D contents and 3D reconstruction from images captured by a mobile phone camera.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.213-224
• /
• 2009

This paper presents a new algorithm for estimating a driver's physical condition using real-time vision system and performs experimentation for real facial image data. The system relies on a face recognition to robustly track the center points and sizes of person's two pupils, and two side edge points of the mouth. The face recognition constitutes the color statistics by YUV color space together with geometrical model of a typical face. The system can classify the rotation in all viewing directions, to detect eye/mouth occlusion, eye blinking and eye closure, and to recover the three dimensional gaze of the eyes. These are utilized to determine the carelessness and drowsiness of the driver. Finally, experimental results have demonstrated the validity and the applicability of the proposed method for the estimation of a driver's physical condition.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.231-239
• /
• 2018

In this paper, we propose a vanishing point detection method using multiple initial vanishing points. Vanishing points are important geometric information that is used for reconstructing 3D structures. Three vanishing points are detected for indoor scenes. In the previous work, it could be inaccurate to detect only one initial vanishing point, because initial vanishing point getting most highest sum of voting could be deferent from the best initial vanishing point. Therefore the method which sets multiple initial vanishing point and detects a best vanishing point from them gives us preparation for the prior case. Also in this paper, we propose a adjusting vanishing point method by postprocessing of detected vanishing points. We could detect more accurate vanishing point by using postprocessing. Experimental results show that the accuracy of the vanishing point detection is about 1~2% higher than that of the existing method through the proposed method and the performance is improved accordingly.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.1
• /
• pp.99-108
• /
• 2015

The partially restrained smart CFT (concrete filled tube) column-to-beam connections with top-seat split T connections show various behavior characteristics according to the changes in the diameter and tightening force of the fastener, the geometric shape of T-stub, and material properties. This paper presents results from a systematic three-dimensional nonlinear finite element study on the structural behavior of the top-seat split T connections subjected to cyclic loadings. This connection includes super-elastic shape memory alloy (SMA) T-stub and rods to obtain the re-centering capabilities as well as great energy dissipation properties of the CFT composite frame. A wide scope of additional structural behaviors explain the influences of the top-seat split T connections parameters, such as the different thickness and gage distances of split T-stub.