• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.195-200
• /
• 1995

화상표시자의 기본특성은 밝기와 명암대비이다. 액정표시자에서는 이러한 특정들을 결정하는 요소들이 많고, 이들 사이의 관계가 복잡하여 최적고건을 최적조건을 찾기 어렵다. 이 논문에서는 빛의 편광상태와 광학소자의 편광투과특성을 각각 뽀앙카레공에서의 백터와 기하학적변환으로 나타내어, 이를 바탕으로 화상의 특성을 나타내는 양을 정의하고, 이들을 최적화하는 설계방법을 설명하며, 이 방법을 실험적으로 확인한다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.221-225
• /
• 1999

The positive branch confocal unstable resonator equipped with an intra-cavity beam splitter has been studied experimentally to achieve low beam divergence in the copper vapor laser. Output laser beams of 0.15 mrad divergence was achieved from the laser system with a 10 cm curvature convex mirror (M=30), and laser beams of 0.1 mrad was achieved for a 5 cm curvature convex mirror (M=60). The power density of the far-field beam from the M=60 resonator laser was 130 times higher than the case of the 2 mrad-operation with the plane-parallel resonator. We also observed the self-mode-locking from the unstable resonator laser pulses.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.84-85
• /
• 2000

굴절률이 외부보다 큰 원통(cylinder)이나 구(sphere)는 경계면에서의 빛의 전반사(total internal reflection)에 의해 손실이 매우 적은 high-Q 공진기가 될 수 있음이 잘 알려져 있다. 이때 발진되는 공명모드를 '속삭이는 회랑 모드(whispering gallery mode: WGM)'라고 하며, 색소가 첨가된 고체 구, 액체 방울, 액체 제트 등의 미소 공진기나 반도체 microdisk 등에서 구현되었다. 이러한 미소공진기는 일반적으로 완전한 구나 실린더의 형태로 만들어지는데, 이 경우 공진 모드를 analytic 하게 구할 수 있고 기하 광학적으로 비교적 간단히 이해할 수 있다. 하지만 최근 Nockel 등에 의해 공진기에 변형을 가한 경우 여러 가지 재미있는 현상이 일어날 수 있다는 것이 밝혀졌다$^{(1, 2)}$ (중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.118-125
• /
• 1997

Non-contacting optical microscopes are increasingly used in recent industrial applications of probes for coordinate measuring machines. They have been found more efficient than conventional touch trigger porbes with ball tips especially in inspecting small-sized objects. There are two major factors affecting measuring accuracy: (1) geometric relations between coordinate systems, (2) magnification ratios of a microscope. In order to determine the magnification ratios exactly, optical imaging of edge was theroretically analyzed and practically adopted to image processing for edge detection. In addition, this paper proposes a geometric calibration method to obtain exact coordinates of measured points from the relations between the machine coordinate system and the image. In the method, the error according to the squareness between the machine axises was also removed. The method was practically adopted to a real coordinate measuring machine. An ultraprecision measurement of 0.2 um uncertainty can be practically achieved.

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.410-420
• /
• 2007

We theoretically derive the set of utilizable paraxial zoom locus equations for all complicated zoom lens systems with infinite object distance, such as a camera zoom lens, by using the Gaussian bracket method and the matrix representation of paraxial ray tracing. And we make the zoom locus program according to these equations in Visual Basic. Since we have applied the paraxial ray tracing equations into Gaussian bracket representation, the resultant program systematically simplifies various constraints of the zoom loci of various N group types. Consequently, the solutions of this method can be consistently used in all types of zoom lens in the step of initial design about zoom loci. Finally, in order to verify the usefulness of this method, we show that one example among 4 groups and that among 5 groups, which are very complex zoom lens systems, can be rapidly and with versatility traced through various interpolations by using this program.

• Korean Journal of Optics and Photonics
• /
• v.25 no.5
• /
• pp.239-244
• /
• 2014

Retro-reflectors have been used for a wide range of applications such as traffic safety, special blinds, optical devices, etc. We analyzed the characteristics of the reflected light of a strap retro-reflector as a function of incidence angle. It is expected that various solar control structures may be designed more quantitatively using the characteristic chart we have prepared.

• Journal of Adhesion and Interface
• /
• v.13 no.2
• /
• pp.73-84
• /
• 2012

The transfer mechanism of optical information at the interface of air and glass (the air-glass IF) has been investigated by thoroughly fulfilling the theoretical and experimental analyses regarding the FTIR (Frustrated Total Internal Reflection) and moisture effects on the fingerprint onto a glass cup with water. As for the fingerprint onto a glass cup with water its image was observed to be very vivid, which turned out to be due to the difference between the two light intensities reflected on the air-glass IF and the wet fingerprint ridge by manipulating the optical theories such as Fresnel relation, Snell's law, FTIR, GT (general transmission) and so on. In addition, the experimental inspection for FTIR and moisture effects on the fingerprint image also evidenced the fact that the vivid fingerprint image originated from the moisture effect rather than the FTIR phenomenon.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.270.2-270.2
• /
• 2013

직선운동하는 하전입자의 진행방향에 수직한 평면상에 서로 직교하는 전기장과 자기장을 걸어주면, 하전입자에는 전기장에 의한 힘 FE와 자기장과 속도 v에 의한 로렌츠력 $F_B=q(v{\times}B)$가 동시에 작용하게 된다. 이때 Wien 조건 FB=-FE를 만족하는 질량 mA과, 에너지 EA를 가지는 하전입자 A는 휘지 않고 직선운동을 계속하나, 하전입자 A와 다른 에너지 $E_B\;(=E_A+{\delta}E)$나 질량 $m_B\;(=m_A+{\delta}m)$을 가지는 하전입자는 휘게 되며, 그 휘는 정도는 ${\delta}E$나 ${\delta}m$에 비례하게 된다. 이 현상을 이용하여 다양한 종류의 에너지 또는 질량 분석기가 독일, 미국, 일본 등의 분석기기 선진국에서 개발되어 왔고, 전자현미경의 이미지 필터로도 활용되고 있으며, 통상 EXB 필터 또는 발명자의 이름을 딴 Wien 필터로 불리어지고 있다. $E{\times}B$ 필터는 일반적인 하전입자빔 렌즈와 다른 광학특성을 가지며, 지난 발표에서는 $E{\times}B$ 필터의 기본 궤도 방정식 및 다양한 2차 기하 수차 방정식의 유도과정 및 결과를 보여주었다. 본 발표에서는 EXB 필터의 전후에 배치시켜, 초점거리 등의 조정을 수행할 4극자와, $E{\times}B$ 필터에서 발생하는 2차 수차의 보정을 수행할 6극자의 광학특성의 계산 결과를 보여준다. 4극자-6극자-EXB필터-6극자-4극자 조합의 기본 광학궤도 계산 결과는 빔 다이어그램으로 보여준다. 6극자에 의해 수차를 줄여서 향상되는 에너지 분해능 값은 수치적으로 추정한다. 실제 제작이 된 각 부품의 외형 및 사진을 보여주어 에너지 필터의 제작 진행 상황을 보고한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.74-76
• /
• 2012

In order to design Transceiver/Receiver antenna with high gain in Ka band, Fresnel zone plate lend(FZPL) antenna is considered and analyzed. Physical optics is applied to demonstrate the FZPL. The FZPL is configured to 11 elements diffraction zones and drived at 20GHz. As a result, calculated received gain using PO method is 33.01dB.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.119-124
• /
• 2000

In this paper based on geometric optics and geometric modeling aspheric surface of the side mirror mold with dead angle reduced have been designed and machined in a CNC machining center, Surface roughness of the mold was evaluat-ed by usin the surface shaping system. Surface generating simulation of a ball endmill process is investigated. Through the simulation based on the surface-shaping system 3-D engineered surfaces and properties of engineered surfaces are obtained, Computer simulation provides the effective working conditions through the prediction of geometric properties of engineered surfaces. The rear view mirror and room mirror play important role on the safe driving condition as a observation of environment but the rear view mirror can not provide complete information of driving environments due to the existence of the dead angle. The analysis on the shape of formed mirror shows that the proposed me？ improves range of a driver's sight.