• Journal of the Korean Solar Energy Society
• /
• v.29 no.3
• /
• pp.73-82
• /
• 2009

포화상태 핵비등과 저 Re수의 흐름비등에서 얻어진 실험결과를 바탕으로 하여, 기포가 성장하는 동안의 등가 기포 직경과 열전단율의 거동에 대한 기포 형상 가정의 효과를 제시하기 위한 해석적인 연구를 수행하였다. 이러한 목적을 달성하기 위하여, 등가 기포 반경이 기포가 성장하는 동안 촬영된 기포의 이미지로부터 얻어질 수 있는 형상 가정을 이용하여 계산되었다. 그리고 열전달율을 포화상태 핵비등 동안 미세크기의 히터와 휘스톤브리지 회로를 이용하여 측정하였다. 그리고, 기포 형상 가정의 효과를 실험결과와 비교하였고, 이를 통해 단일 기포의 성장 거동을 분석하기 위한 기포 형상 가정이 매우 중요함을 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.596-602
• /
• 2018

Nanoimprint lithography (NIL) is an emerging technology that enables cost-effective and high-throughput nanofabrication. In ultraviolet (UV) NIL, low-cost and high-speed production can be achieved using a non-vacuum environment at room temperature and low pressure. However, there are problems with the formation of bubble defects in such an environment. This paper investigates the shape of the mold cavity and the bubble defect formation in UV NIL in a non-vacuum environment. The bubble defect formation was simulated using two-dimensional flow analysis and the VOF method for commonly used cavity mold shapes (rectangular, elliptical, and triangular). The characteristics of the resist flow front and various contact angles were also analyzed. The shape of the mold cavity had a very significant effect on the bubble defect formation. For all cavity shapes, a smaller contact angle with the mold and larger contact angle with the substrate decreased the possibility of bubble defect formation. The elliptical shape was the most effective for preventing bubble defect formation.

• Particle and aerosol research
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2017

Accurate prediction of size, shape and velocity of a bubble rising through a liquid pool is very important for predicting the particulate removal efficiency in pool scrubbing, for designing engineering safety features to prepare for severe accidents in nuclear power plants, and for predicting the emission of fission products from MCCI (molten core-concrete interaction) process during severe accidents. In this review article, previous studies on the determination of the size, shape and rising velocity of a bubble in liquid are reviewed. Various theoretical and parameterization formulas calculating the bubble size, shape and velocity from physical properties of liquid and gas flowrate are compared. Recent studies tend to suggest simple parameterizations that can easily determine the bubble shape and rising velocity without iteration, whereas iteration has to be performed to determine the bubble shape and velocity in old theories. The recent parameterizations show good agreement with measured data obtained from experiments conducted using different liquid materials with very diverse physical properties, proving themselves to be very useful tools for researchers in related fields.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06a
• /
• pp.190-192
• /
• 2006

본 논문은 유리의 결함 검사를 위한 알고리즘을 제안한다. 기포 측정에 대한 정의와 기포의 형상을 측정하는 알고리즘을 제시하고, 비젼 시스템을 이용한 검사자동화 시스템에 적용하여 테스트를 하였다. 기포 형상에는 두가지 타입으로 원형 타입과 긴형상 타입으로 구분되며, 이 두가지 타입에 따라 측정 결과 표시 방법이 다르다. 이미지 획득 및 전저리에서는 ccd 카메라를 사용하여 획득한 영상과 결함을 찾기 위해 영상을 이진화를 했으며, 얻어진 이진영상은 chain code 알고리즘을 통해 결함의 면적, 둘레 길이 및 위치등의 정보를 추출한다. 실제 물리적 크기를 정확히 얻기 위해 카메라의 보정을 했다. 광학계의 심도에 비하여 패널의 두께가 두껍기 때문에 하나의 영상으로는 기포의 양질의 영상획득이 불가능하다. 이러한 문제를 해결하기 위하여 높이를 변화시켜가며 획득한 영상으로 불량형상을 찾아내고, 측정하기 적합한 영상을 획득하는 화상처리 알고리즘도 제안한다. 조명은 기존에 사용한 백라이트 명시야 조명을 사용하였다. 시스템의 결함 검출율은 거의 90%이상의 성능을 나타내고 있다.

• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.151-158
• /
• 2011

Bubbles within the foamed concrete manufactured by pre-foaming method is the main factor which affects the physical properties of foamed concrete such as density, strength, and porosity. Although many researches on foamed concrete have been continuously carried out, insufficient number of researches on the properties related to bubbles in the foamed concrete has been performed except for chemical application related researches. In order to make an optimal foamed concrete, study on the bubble properties must be pursued. In order to effectively implement bubbles in the manufacturing of foamed concrete, the bubble properties must be estimated. In this study, in order to determine the bubble properties, examination of the bubble properties according to types and foaming agent concentration was performed. An foaming agent used for this test were anionic surfactant, rosin, and protein system with the foaming agent concentration range of 0.05~13%. Test parameters considered in the study were foaming rate, foam volume, drainage solution volume, and bubble size. The study results showed that, regardless of foaming agent type, higher concentration of foaming agent showed an increase in the foaming rate. Also, the results showed that concentration of foaming agent affected bubble size, drainage solution volume change, and bubble distributions. With respect to the stability of the bubble, protein foaming agent was better than anion surfactant or rosin foaming agent. With respect to the bubble shape, anion surfactant and rosin formed bubbles had polygon shape where as protein formed bubbles had spherical shape.

• Nuclear Engineering and Technology
• /
• v.26 no.3
• /
• pp.374-380
• /
• 1994

A method to simulate the extent of interlinkage of grain boundary gas bubbles to the free surfaces of fuel pellet was developed. With the shape of UO$_2$gain treated as tetrakaidecahedron (TKD)), the interlinked fraction of fission gas bubbles to free surfaces at grain comers was calculated as a function of the radius of grain corner bubbles by the Monte Carlo technique. In spite of two dimensional analysis, the present method shooed reasonable agreement between predicted and measured fuel swelling at the moment that complete bubble interlinkage was achieved. However, for more realistic simulation of interlinkage, grain comer bubbles should be treated three dimensionally.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.177-184
• /
• 2010

This paper presents the electric field analysis for 2[MVA] mold transformer using finite element method. The electric field was calculated for the voltage applied to the mold transformer without voids in the insulating material. Then, it was analysed the maximum electric field when the voids was in the insulating materials. And the starting voltage of partial discharge was predicted due to the voids. The effects of voids in epoxy resin on the electric field were investigated for different sizes, shapes, positions and arrangements of voids.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.542-545
• /
• 2010

통상 분 당 $0.6{\ell}$, 최대 $2{\ell}$의 유량과 토출 압력 5atg의 운전 조건을 만족시키는 미세기포발생기용 소형 왕복동식 공기압축기를 개발하는 것이 본 연구의 목적이다. 미세기포발생기는 현재 농업, 어업, 미용, 수질오염방지 등 여러 방면에서 매우 널리 사용되고 있는데, 이러한 미세 기포를 발생시키기 위해서는 고압의 소형 공기압축기가 요구 된다. 이를 위해 비교적 간단한 구동방식의 왕복동식 압축방법을 선정하여 핵심 설계 항목인 실린더와 피스톤형상, 간극체적, 압축비, 구동모터 출력을 이론적 예측과 실험적 방법을 통하여 최적화하였다. 그 결과 미세기포 발생장치 시스템에서 가장 큰 공간을 차지하고 있는 압축기를 소형화시켰으며 압축기 개발 목표 성능을 달성하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.4
• /
• pp.135-143
• /
• 1989

The experimental study on the shape and behavior of bubbles in U-tube deep shaft of 32m has been performed. According to the results in this paper, the equivalent spherical diameter of bubbles was 0.422-0.722cm and the shape of bubbles was almost ellipsoidal for bubbles to be generated ta single-orifice of diameter 0.06cm in the downcomer of the deep shaft system. Gas hold-up and gas-liquid contact area of bubbles in the deep shaft was decreased in accordance with depth, Also downcomer velocity of bubbles was slower than circulation velocity of liquid and riser velocity of bubbles was fast than circulation velocity. The bubble-size-distribution of bubbles in the deep shaft was the logarithmic probability distribution. The number of bubbles in the deep shaft was decreased in accordance with depth and the number of bubbles in the downcomer is more than the bubbles in the riser.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.1
• /
• pp.117-123
• /
• 2024

Bubbles generated in water receive an upward buoyant force due to the density and pressure difference of the surrounding fluid. Additionally, the behavior, shape, and heat exchange process of bubbles vary depending on the viscosity, surface tension, rising speed, and size difference with the surrounding fluid. In this study, we modeled speed, and heat transfer of a high-temperature single bubble rising in a cylindrical water tank. For this purpose, velocity, and temperature of the bubbles were calculated using theoretical equations, to be compared with numerical simulation results. The numerical analysis was performed using a commercial software, and the stability of the numerical analysis with mesh size was confirmed through calculation of the grid convergence index. The numerical analysis of the rising speed and temperature of a single bubble showed the values to converge when the minimum cell size was 1/160 of the bubble diameter, and the temperature decrease was confirmed to be the same as that of the surrounding fluid within 0.05 seconds.