• Nuclear industry
• /
• no.5_6 s.13
• /
• pp.57-62
• /
• 1983

방사성폐기물은 원자력발전에 의한 것이 그 대부분을 차지하며 의학, 공업이용 등에서 발생되는 것이 여기에 추가된다. 발생된 폐기물은 고화${\cdot}$희석 등의 처리를 한후 필요에 따라 수송, 저장, 보관을 거쳐서 최종적으로 처분된다. 이 일련의 과정에 따라 그 안전성을 확보하기 위해서 여러 가지의 규칙, 기준이 설정되어 있으며 몇가지는 앞으로 더 책정되어야 할 필요가 있다.

• Life and Agrochemicals
• /
• s.255
• /
• pp.28-30
• /
• 2010

국가마다 자국농업보호와 식품안전성 확보를 위해 관리대상 유해물질 종류 확대 및 규제기준을 강화하여 미국은 Zero Tolerance System을, 일본과 유럽연합은 PLS제도를, 우리나라는 농산물우수관리제도(GAP)를 시행하고 있고 농촌진흥청은 이에 필요한 농산물우수관리기준을 설정, 보급하고 있다.

• Journal of the Korean Geographical Society
• /
• v.50 no.3
• /
• pp.277-287
• /
• 2015

This paper addresses limitations of land-change modeling application in the context of REDD (Reducing Emissions from Deforestation and forest Degradation). REDD is an international conservation policy that aims to protect forests via carbon credit generation and trading. In REDD, carbon credits are generated only if there is measurable quantied carbon sequestration activities that are additional to business-as-usual (BAU). A "reference level" is defined as simulated baseline carbon emissions for the future under a BAU scenario, and predictive land-change modeling plays an important role in constructing reference levels. It is tested in this research how predictive accuracies of two land-change models, namely Geographic Emission Benchmark (GEB) and GEOMOD, vary with respect to different spatial scales: Xishuangbanna prefecture and Yunnan province. The accuracies are measured by Figure of Merit. In this Chinese case study, it turns out that GEB's better performance is mainly due to quantity (e.g., how many hectares of forest will be converted to agricultural land?) rather than spatial allocation (e.g., where will the conversion happen?). As both quantity and allocation are crucial in REDD reference level setting it appears to be fundamental to systematically analyze accuracies of quantity and allocation independently in pursuit of accurate reference levels.

• Korean Journal of Social Welfare Studies
• /
• v.45 no.2
• /
• pp.203-232
• /
• 2014

The purpose of this study is to compare the national quality regulation schemes among four countries, and to find out implications to Korean quality regulation system of social services. For this, this study fixed comparative criteria on national quality regulation schemes, and compared the quality regulation schemes of 4 countries such as England, United States, Singapore and Japan. By reviewing prior relevant studies, three criteria could be suggested.: the level of user centeredness, the effectiveness of regulatory enforcement and stability of operation system. All analysed nations share similarities in that they all eager to provide quality information to their service users and develop nationally acceptable quality standards of social services. On the contrary, differences are identified in the level of regulatory enforcement and establishment of independent body for national quality control. By these results, this study discussed the meaning of these findings and their implications on the development of Korean quality regulation system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.104-109
• /
• 2018

Generally, the durability of the parking lock gear is evaluated through an endurance test for the entire transmission but no test standard exists for the durability test of one part of a parking lock gear. Therefore, in this study, the durability test standards of the parking lock gear were determined autonomously, and the durability performance test was conducted. A static fracture test was carried out to determine the yield strength of the parking lock gear, and a durability test condition was set to 60 % of the yield strength. The durability test of 1,000,000 times was conducted under the given conditions using a dedicated test jig manufactured for the test. Because the jig fractured during the static fracture test, finite element analysis for the jig was carried out and the jig was re-designed. The modified jig was manufactured and the durability test was carried out based on the test standard of autonomously. The basic data on the performance and endurance limit of the parking lock gear were obtained using these tests and analyses, and the basic data will be used as fundamental materials for the design and the development of the parking lock gear.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.491-496
• /
• 2003

In Korea, the dose limits to the public were reduced according to ICRP-60 recommendations. The secondary quantities, Effluent Concentration Limits (ECLs) were derived and enacted to Korean Atomic Laws based on ICRP-60 recommendations. The Korea atomic laws require assurance that radioactive materials within gaseous effluents do not exceed dose limits and ECLs. This simply means that any effluent that would possibly contain radioactivity must be monitored. There are various methods to monitor the radioactivity of effluent monitor to satisfy the dose limits and the ECLs for gaseous effluents. The many factors (safety margin) should be considered in determining of the setpoint of effluent monitor, following these limits. In this study, we studied the determination method of alarm setpoint for gaseous effluent Radiation Monitoring Systems using dose factors considered the main pathway of radionuclides to compare the preceding determination method of alarm setpoint for gaseous effluent RMSs using dose assessment program considered all the practicable pathways of radionuclides.

• The Korean Journal of Pesticide Science
• /
• v.11 no.4
• /
• pp.289-298
• /
• 2007

In order to set ADIs for pesticides registered for use in Korea, an analysis of guidelines on setting ADIs and ADIs established by international bodies and advanced countries was conducted General guidelines on the derivation ADIs are very similar among regulatory authorities. However, there were large differences in the ADIs' setting status and ADI values set for some individual pesticides. ADIs were established for 213 pesticides in UN, 332 in USA, 230 in Japan, 219 in UK and 435 in EU and Australia. Of the established ADIs in other countries, 87 to 252 pesticides were the pesticides registered in Korea depending countries. The number of lowest ADIs depending countries was 32 in USA, 23 in Japan, 6 in EU and Australia. The key target organs and endpoints used for setting ADIs were in the order of enzyme inhibition, body weight change and adverse effect on liver. The number of ADIs used for setting MRLs in Korea was high in the order of JMPR, Japan and USA. ADIs of EU and JMPR had highest similarity among bodies investigated. By referring to the guidances investigated at this study, guideline for setting ADI and ADIs for 64 pesticides registered in Korea were proposed.

• Journal of Engineering Education Research
• /
• v.9 no.3
• /
• pp.22-36
• /
• 2006

This paper is aimed to design for qualification structure and criteria for preparation of qualification test of computer operation engineer. In this study, a DACUM(Development A curriculum) method job analysis to extract contents such as task range, grades or ranks, eligibility, examination standards, selection criteria of examination questions, examination methods, etc was done by an job analysis committee composed of 7 specialists in the industry and academia. In the first place, this report presents job analysis models by procedures for developing selection criteria of examination questions of computer operation engineer. The first step is preparation for job analysis(data research, interviews and selection of experts), the second step the establishment of job models(first expert council and site study), the third step the drawn-out of knowledge, skills, and tools(the second expert council and site study), the fourth step the selection of courses and subjects(the third expert council), the fifth step the establishment of guidelines for making questions(the third site study).

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.473-482
• /
• 2012

This study is aimed to design for qualification structure and criteria for preparation of qualification test of the Livestock. In this study, a DACUM(Development A curriculum) method job analysis to extract contents such as task range, eligibility, examination standards, selection criteria of examination questions, examination methods, etc was done by an job analysis committee composed of 7 specialists in the industry and academia. In the first place, this report presents job analysis models by procedures for developing selection criteria of examination questions of the Livestock. The first step is preparation for job analysis(data research, interviews and selection of experts), the second step the establishment of job models(first expert council and site study), the third step the drawn-out of knowledge, skills, and tools(the second expert council and site study), the fourth step the selection of courses and an examination subject(the third expert council), the fifth step the establishment of guidelines for making questions(the third site study).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.340-340
• /
• 2021

가뭄의 특성상 시점과 종점을 명확하게 정의하기 어렵기 때문에 기준수문량을 설정하고 부족량과 지속기간을 정의하는 것이 일반적이다. 대상 수문량은 강우나 유출량을 사용할 수 있지만, 두 성분간 지체와 감쇄효과로 인하여 빈도해석의 결과는 차이를 보일 수 밖에 없어, 사용 목적에 따라 선별적으로 적용해야 한다. 가뭄빈도해석은 강우를 기반으로 지속기간과 심도를 정의하여 빈도를 해석하는 연구가 선행되어왔지만, 기본적으로 강우의 간헐적 발생특성과 체감도의 한계가 문제로 지적되고 있다. 본 연구에서는 댐 유입량의 Run 시계열 특성을 이용하여 다양한 유황을 기준유량으로 활용하여 가뭄의 시점과 종점에 대한 가뭄사상을 추출하고 지속기간과 누적부족량을 계산하여 가뭄빈도해석의 변수로 설정하였다. 두 변수간의 복잡한 상호 관계를 해석하기 위해 Copula 함수를 이용한 이변량 가뭄빈도해석을 진행하였다. 먼저 소양강댐('74-'19) 유입량, 충주댐('86-'19) 유입량을 연구대상지역으로 설정하여, 두 유역의 유입량의 추세분석을 통해 시간의존성을 파악하였다. 유황분석에 사용되는 분위량중 평수량을 기준값으로 사용하여 각 년별 최대 지속기간과 누적부족량을 추출하였다. Copula 가뭄빈도해석을 수행하기 전에 지속기간에는 GEV, 누적 부족량에는 Log-normal 분포를 적용해 단변량 누적확률분포를 계산하여 재현기간을 도출하였다. 이변량 빈도해석에 Clayton Copula 함수를 적용하여 가뭄빈도해석을 진행하였고, Copula 이변량 재현기간과 SDF곡선을 도출하였다. Clayton Copula를 이용한 이변량 가뭄빈도해석의 결과로 소양강댐의 가장 극심한 가뭄은 1996년으로 단변량 재현기간은 지속기간 기준 9.11년, 누적부족량 기준 17.26년, Copula 재현기간은 141.19년 이며 충주댐의 가장 극심한 가뭄은 2014년으로 단변량 재현기간은 지속기간 기준 17.76년, 누적부족량 기준 18.72년, Copula 재현기간은 184.19년으로 단변량 가뭄빈도해석을 통한 재현기간보다 Copula 재현기간이 높은 결과가 도출되었다. Run 시계열을 바탕으로 한 기준유량의 임계값 기준 Event 산정과 Copula를 이용한 빈도해석은 가뭄분석에 이용되는 자료의 상관관계와 분포특성을 재현하는데 효과적인 특징이 있다. 이를 미루어 보아 Copula 함수를 이용한 가뭄빈도해석의 재현기간은 보다 현실적인 재현기간을 도출할 수 있는 것으로 판단된다. 임계값의 조정을 통해 가뭄빈도해석의 변수의 양이 늘어나면, 보다 정확도 높은 재현기간을 도출하여 수문학적 가뭄을 정의할 수 있을 것이라고 사료된다.