• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.98-109
• /
• 2011

Habitat restoration initiative is an important factor for the on-site preservation of butterflies. A new habitat necessitates the investigation of the ecology of the butterfly, the landscape of the habitat, the work process, and a cost analysis. In this study, these factors were analyzed through1) re-consideration of the secured results from three years of field work, and 2) a habitat area estimation conducted according to the presence or absence of larvae and adults via a Parnassius bremeri Bremer survey. The investigation of the natural habitat, done for both larvae and adult butterflies found in South Korea, suggested that multiple patches with a minimum size exceeding $300m^2$ and with an average size of about $1,600m^2$were required for survival of this butterfly. Therefore, more than five patches should be considered for butterfly habitat and patches should have similarity to the present habitat environment with transplantation plans for diet plants and honeydew plants. In addition, to activate the migration of the butterfly, cutting down trees that are obstacles to migration, minimizing the distance between patches and the addition of a stepping patch are also required. A patch connectivity analysis showed that patches should be located within 300m of neighboring patches, as the migration of the butterfly will fail if it is more than 600m. Additionally, more than $10,000m^2$ for a single patch or a patch network composed more than five patches over $1,600m^2$ in size were recommended, with a total patch size of $8,000m^2$. Additionally, neighboring multiple patch networks are more desirable than a single habitat in the event a cyclic habitat pattern arises. In this study, we suggest a habitat restoration and optimal prerequisites for a butterfly habitat. It is expected that this research will lead to the creation of a good model for the restoration of butterfly species.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.515-525
• /
• 2007

In this investigation, results of laboratory tests on four reinforced concrete flat plate interior connections with elongated rectangular column support which has been used widely in tall residential buildings are presented. The purpose of this study is to evaluate an effect of column aspect ratio (${\beta}_c={c_1}/{c_2}$=side length ratio of column section in the direction of lateral loading $(c_1)$ to the direction of perpendicular to $c_1$) on the hysteretic behavior under earthquake type loading. The aspect ratio of column section was taken as $0.5{\sim}3\;(c_1/c_2=1/2,\;1/1,\;2/1,\;3/1)$ and the column perimeter was held constant at 1200mm in order to achieve nominal vertical shear strength $(V_c)$ uniformly. Other design parameters such as flexural reinforcement ratio $(\rho)$ of the slab and concrete strength$(f_{ck})$ was kept constant as ${\rho}=1.0%$ and $f_{ck}=40MPa$, respectively. Gravity shear load $(V_g)$ was applied by 30 percent of nominal vertical shear strength $(0.3V_o)$ of the specimen. Experimental observations on punching failure pattern, peak lateral-load and story drift ratio at punching failure, stiffness degradation and energy dissipation in the hysteresis loop, and steel and concrete strain distributions near the column support were examined and discussed in accordance with different column aspect ratio. Eccentric shear stress model of ACI 318-05 was evaluated with experimental results. A fraction of transferring moment by shear and flexure in the design code was analyzed based on the test results.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.293-302
• /
• 2014

This study was carried out to develop rain shelter which can make an appropriate size and environment for Chinese cabbage rainproof cultivation. Fifty three farms with chinese cabbage rainproof cultivation system have been investigated to set up width and height of rain shelter. Mostly the width of 6m was desired for rain shelter and the height of 1.6m for their eaves, so these values were chosen as the dimensions for rain shelter. After an analysis of their structural safety and installation costs by the specifications of the rafter pipe, Ø$25.4{\times}1.5t$ and 90cm have been set as the size of rafter that such size costs the least. This size is stable with $27m{\cdot}s^{-1}$ of wind velocity and 17cm of snow depth. Therefore it is difficult to apply this dimension to area with higher climate load. In order to sort out such problem, the rain shelter has been designed to avoid damage on frame by opening plastic film to the ridge. Once greenhouse band is loosen by turning the manual switch at the both sides of rain shelter and open button of controller is pushed then switch motor rises up along the guide pipe and plastic film is opened to the ridge. Chinese cabbage can be damaged by insects if rain shelter is opened completely as revealed a field. To prevent this, farmers can install an insect-proof net. Further, the greenhouse can be damaged by typhoon while growing Chinese cabbage therefore the effect of an insect-proof net on structural safety has been analyzed. And then structural safety has been analyzed through using flow-structure interaction method at the wind condition of $40m{\cdot}s^{-1}$. And it assumed that wind applied perpendicular to side of the rain shelter which was covered by insect-proof net. The results indicated that plastic film was directly affected by wind therefore high pressure occurred on the surface. But wind load on insect-proof net was smaller than on plastic film and pressure distribution was also uniform. The results of structural analysis by applying pressure data extracted from flow analysis indicated that the maximum stress occurred at the end of pipe which is the ground part and the value has been 54.6MPa. The allowable stress of pipe in the standard of structural safety must be 215 MPa or more therefore structural safety of this rain shelter is satisfied.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.279-287
• /
• 2020

Recently, interest in radiation protection is increasing because of the occurrence of accidents related to exposure dose. So, the nuclear safety act provides to install the shields to avoid exceeding the dose limit. In particular, when the worker conducts the non-destructive testing (NDT) without the fixed shielding structure, we should monitor the access to the workplace based on a constant dose rate. However, when we apply for permits for NDT work in these work environments, the consideration factors to the estimation of the distance and exposure dose are not legally specified. Therefore, we developed the excel model that automatically calculates the distance, exposure dose, and cost if we input the factors. We applied the assumption data to this model. As a result of the application, the distance change rate was low when the thickness of the lead blanket and collimator is above 25 mm, 21.5 mm, respectively. However, we didn't consider the scattering and build-up factor. And, we assumed the shape of the lead blanket and collimator. Therefore, if we make up for these limitations and use the actual data, we expect that we can build a database on the distance and exposure dose.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.785-795
• /
• 2018

The International Maritime Organization (IMO) has recognized the risk of hull fouling and announced '2011 Guidelines for the control and management of ship's biofouling to minimize the transfer of invasive aquatic species'and is planning international regulations to enforce them in the future. In this study, to effectively respond to future international regulation, we introduce the case of leading countries related to management of hull fouling and also investigate environmental risk assessment techniques for in-water cleaning. Australia and New Zealand, the leading countries in hull fouling management, have established hull fouling regulations through biological and chemical risk assessment based on in-water cleaning scenarios. Most European countries without their government regulation have been found to perform in-water cleaning in accordance with the IMO's hull fouling regulations. In the Republic of Korea, there is no domestic law for hull fouling organisms, and only approximately 17 species of marine ecological disturbance organisms, are designated and managed under the Marine Ecosystem Law. Since in-water cleaning is accompanied by diffusion of alien species and release of chemical substances into aquatic environments, results from biological as well as chemical risk assessment are performed separately, and then evaluation of in-water cleaning permission is judged by combining these two results. Biological risk assessment created 40 codes of in-water cleaning scenarios, and calculated Risk Priority Number (RPN) scores based on key factors that affect intrusion of alien species during in-water cleaning. Chemical risk assessment was performed using the MAMPEC (Marine Antifoulant Model to Predict Environmental Concentrations), to determine PEC and PNEC values based on copper concentration released during in-water cleaning. Finally, if the PEC/PNEC ratio is >1, it means that chemical risk is high. Based on the assumption that the R/V EARDO ship performs in-water cleaning at Busan's Gamcheon Port, biological risk was estimated to be low due to the RPN value was <10,000, but the PEC/PNEC ratio was higher than 1, it was evaluated as impossible for in-water cleaning. Therefore, it will be necessary for the Republic of Korea to develop the in-water cleaning technology by referring to the case of leading countries and to establish domestic law of ship's hull fouling management, suitable for domestic harbors.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.3
• /
• pp.161-177
• /
• 2020

This research aims to identify the relevance of 'Adolescence consumption' units to ESD(Education for Sustainable Development), and to analyze the unit's inquiry tendency through the Romey analysis method. The assessment criteria in association with ESD developed in the previous literature were summarized and established to set up an analysis framework consisted of 11 key points including environmental perspective (natural resources, climate change/disaster prevention and mitigation, and sustainable rural and urban systems), economic perspective (corporate sustainability, market economy, and poverty gap mitigation), and socio-cultural perspective (human rights/peace/human protection, cultural diversity and understanding, health/safety, civic engagement, and management of nation). With this framework, the learning contents of 'adolescence consumption life' unit in twelve middle school Home Economics textbooks were analyzed including the texts, images/illustrations/tables/graphs, and activities. The analysis revealed that the core elements of the 'market economy' and 'management of nation' from the economic perspective were presented in three different formats: texts, images/illustrations/tables/graphs, and activities. However, relatively insufficient contents were presented in terms of health/safety, civic engagement, sustainable rural and urban systems, and corporate sustainability, and thus, development of textbooks dealing with various ESD contents is neededrecommended. Additionally, most textbooks' texts and images/illustrations/tables/graphs tend to be authoritative, while activities and assignments exhibited an inquiry tendency. It is advisable to incorporate a wider variety of ESD-related content in Home Economics classes and creatively employ inquiry-based learning activities for the development of pro-sustainable-development consumption values and behavioral tendencies among young students.

• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.6
• /
• pp.302-308
• /
• 2006

Purpose: Although several neuroanatomical models of panic disorder have been proposed, little is known regarding the neurological mechanisms underlying cognitive-behavioral therapy (CBT) in patients with panic disorder. This study was performed to identify the brain structures that show changes of regnioal cerebral blood flow (rCBF) after CBT in patients with panic disorder. Materials and Methods: Seven patients who were diagnosed as panic disorder by DSM-IV were treated with CBT for 8 weeks and twelve healthy volunteers joined in this study. Serial $^{99m}Tc-ECD$ brain perfusion SPECT images were acquisited and PDSS-SR (Self-Report version of Panic Disorder Severity Scale) and ACQ (Agoraphobic Cognitive Question) scores were measured just before and after CBT in all patients. Data were analyzed using SPM2. Results: Subjective symptoms were improved, and PDSS-SR and ACQ scores were significantly reduced ($14.9{\pm}3.9\;vs.\;7.0{\pm}1.8$, p<0.05; $30.3{\pm}8.5\;vs.\;21.6{\pm}3.4$, p<0.05, respectively) after CBT in panic patients. Before CBT, a significant increase of rCBF was found in the cingulate gylus, thalamus, midbrain, both medial frontal and temporal lobes of the panic patients compared to the normal volunteers. After CBT, we observed a significant rCBF decrease in the left parahippocamus, right insula and cingulate gyrus, both frontal and temporal lobes, and a significant rCBF increase in both the occipital lobes, left insula, both frontal and left parietal lobes. Conclusion: These data suggested that CBT is effective for panic disorder and diminish the activity of the brain areas associated with fear in panic disorder.

• Progress in Medical Physics
• /
• v.16 no.1
• /
• pp.24-31
• /
• 2005

The stereotactic radiosurgery (SRS) describes a method of delivering a high dose of radiation to a small tar-get volume in the brain, generally in a single fraction, while the dose delivered to the surrounding normal tissue should be minimized. To perform automatic plan of the SRS, a new method of multi-isocenter/shot linear accelerator (linac) and gamma knife (GK) radiosurgery treatment plan was developed, based on a physical lattice structure in target. The optimal radiosurgical plan had been constructed by many beam parameters in a linear accelerator or gamma knife-based radiation therapy. In this work, an isocenter/shot was modeled as a sphere, which is equal to the circular collimator/helmet hole size because the dimension of the 50% isodose level in the dose profile is similar to its size. In a computer-aided system, it accomplished first an automatic arrangement of multi-isocenter/shot considering two parameters such as positions and collimator/helmet sizes for each isocenter/shot. Simultaneously, an irregularly shaped target was approximated by cubic structures through computation of voxel units. The treatment planning method by the technique was evaluated as a dose distribution by dose volume histograms, dose conformity, and dose homogeneity to targets. For irregularly shaped targets, the new method performed optimal multi-isocenter packing, and it only took a few seconds in a computer-aided system. The targets were included in a more than 50% isodose curve. The dose conformity was ordinarily acceptable levels and the dose homogeneity was always less than 2.0, satisfying for various targets referred to Radiation Therapy Oncology Group (RTOG) SRS criteria. In conclusion, this approach by physical lattice structure could be a useful radiosurgical plan without restrictions in the various tumor shapes and the different modality techniques such as linac and GK for SRS.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.838-847
• /
• 1999

Based on the results that the extract of Korean mistletoe (KM-110) has immunological and anti-tumor activities and its main component is lectin called KML-U, this study was carried out to investigate the immunostimulatory and anti-tumor activities of FKM-110, fermented KM-110 with lactobacillus, as a basic study for the development of functional food with anti-tumor activity. The amount of lectin after fermentation determined by ELISA was varied with the fermentation time and kinds of lactobacillus. Cytotoxic effects of FKM-110 on the various tumor cells was significant and dependent on the concentration of KML-U and the kinds of lactobacillus. FKM-110 stimulated macrophage and resulted in the secretion of some cytokines such as IL-1 and $IFN-{\gamma}$, but this effect was not correlated with the concentration of lectin. FKM-110 fermented with Marshall Lactobacillus casei showed the most potent antitumor activity in experimental and spontaneous metastasis models. When yoghurt produced with KM-110, Marshall Lactobacillus casei and skim milk was administered orally to mouse, the metastasis of tumor cells was significantly inhibited.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.316-320
• /
• 2008

This study examined the combined plant extracts (FGF271) of Estromon in ovariectomized (OVX) rats to determine whether Estromon's significant clinical improvement effects on menopausal symptoms are predominantly due to the phytoestrogenic action of the combined extracts. The results showed that all three FGF271-treated groups had significantly improved serum osteocalcin levels as compared to the control group (p<0.05). In addition, all FGF271- and Estromon-treated groups had increases in femoral bone mineral density (FBMD) (p<0.05), and the increase in the FGF271 group was dose-dependent. A pairwise comparison of the FGF271- and Estromon-treated groups receiving the same dosage of FGF271 indicated that there was no significant difference between the groups. Therefore, the FBMD increases that occurred in the Estromon groups were solely attributable to the phytoestrogenic effects of FGF271. It was conclude that the phytoestrogenic effects of Estromon, as shown in clinical studies, are predominantly caused by FGF271, the mixed extracts of Cynanchum wilfordii, Phlomis umbrosa, and Angelica gigas.