• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.62-69
• /
• 2023

The use of low-grade coal is continuously increasing with the development of combustion technology and cost reduction for coal used in thermal power plants . During combustion, the latent heat of evaporation due to moisture is large, and there is a risk of spontaneous combustion and dust explosion during the process of storing and pulverizing coal. This study compared and evaluated the minimum explosive concentration and explosive strength of four types of coal dust-fine, coal dust-coarse, wood pallet+organic dust, and wood chip with coal powder collected from domestic power plant D. The minimum explosive concentration of coal dust was measured according to JIS Z 8818:2002, and the explosion strength was tested according to ASTM E1226 using a Siwek 20 L Chamber Apparatus. As a result of the minimum explosive concentration test, it was found that coal dust-fine has a risk of dust explosion, and since an explosion occurs at a dust concentration of 130 g/m³ of wood chips, it was found that there is a risk of explosion at the lowest dust concentration. According to the dust explosion class standard, Kst is less than 200 bar m/s, and all samples fall under the explosion class St 1, and the dust has a low risk of explosion.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.639-643
• /
• 2011

Fry-drying of coal slurry is one of the upgrading low rank coal processes. It consists of slurry mixing, slurry dewatering, solvent recovery and briquetting. Cost estimation and economic feasibility are examined for the upgrading low rank coal process based on capacity of 1 million ton/yr. In case that investment costs are $100,000,000, discount rate is 12%, and service life is 20 years, the results of economic analysis are enough to satisfy the evaluation criteria of investment such as IRR, B/C ratio, NPV and discounted payback period. According to sensitivity analysis, investment value are very sensitive to raw material cost and product price. Since the bituminous coal price is currently soaring, it is expected that the investment value will increase more and more.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.5
• /
• pp.527-536
• /
• 2009

The purpose of this experimental study was to investigate the block shear fracture behavior and curling effect on a single shear-bolted connection in thin-walled carbon steel fabricated with four bolts. The specimens that fail by block shear were planned to have a constant dimension of the edge distance perpendicular to the loading direction, bolt diameter, pitch, and gage. The main variables of the specimens were plate thickness and end distance parallel to the loading direction. A monotonic tensile test was carried out for the bolted connections, and the ultimate behaviors, such as the fracture shape, ultimate strength, and curling, were compared with those that had been predicted using the current design specifications. The conditions of curling occurrence in terms of plate thickness and end distance were also investigated, and the strength reduction due to curling was considered.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.2
• /
• pp.250-260
• /
• 2007

It was investigated that the emission characteristics of volatile organic compounds (VOCs) from small and medium companies located on industrial complexes in Metropolitan area. The emission characteristics are intermittent sources in which VOCs emissions are highly depends on the working condition. Optimized ventilation system to improve air quality in working area for the three typical companies were installed. Adsorption characteristics of major VOCs such as MEK, IPA, and toluene emitted front the companies were investigated for design of the activated carbon vessel as a VOCs control facility in each company. Concentration of total hydrocarbon and gas amounts needed to ventilation were also used as a design parameter. Mixed adsorbent to improve adsorption characteristics of problematic solvents like IPA and the design guideline of the activated carbon vessel have been suggested.

• Clean Technology
• /
• v.23 no.1
• /
• pp.34-41
• /
• 2017

The scrubber wastewater should be replaced frequently to maintain efficiency. Most chemical companies consign scrubber wastewater, because there are no wastewater treatment facilities. So scrubber wastewater is not frequently replaced because of high treatment cost. For this reason, the most scrubber exhaust gas exceeds the odor emission limit or has a phenomenon that the odor intensity of exhaust gas becomes higher. Therefore we have developed a scrubber wastewater cleaning system consisting of filtration and adsorption processes. The scrubber wastewater cleaning system was applied two chemical companies. We evaluated the water quality and odor reduction effect before and after system application. As a result, scrubber wastewater quality improved by 50% or more, odor reduction efficiency of scrubber exhaust gas improved by 20% or more. And the total operating costs of the scrubber could be reduced by 40% or more.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.141-148
• /
• 2012

In this study, the composite coating materials with improved thermal insulation property were prepared by incorporating the hydrophobic silica aerogel. The surface modification of silica aerogel was performed to obtain UV curable urethane acrylate hybrid coating sols with good compatibility by using surfactant(Brij 56). The polycarbonate substrates were coated by the prepared composites and cured under UV radiation. The incorporation of aerogel with only 10 vol% of content resulted in remarkable improvement by about 28% in the thermal insulation property of the coated film, as compared with substrate. In addition, increasing aerogel content was found to give minor effect on the variation of optical transparency, adhesion, and surface hardness of the coated film.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.469-477
• /
• 2006

Models to predict the ultimate strength of simply supported or continuous deep beams with web openings are proposed. The derived equations are based on upper-bound theorem. The concrete is assumed as a perfectly plastic material obeying the modified Coulomb failure criteria with zero tension cutoff. Reinforcing bar is considered as elastic-perfectly plastic material and its stress is calculated from the limiting principal compressive strain of concrete. The governing failure mechanisms based on test results are idealized as rigid moving blocks separated by a hyperbolic yield line. The effective compressive strength of concrete is calculated from the formula proposed by Vecchio and Collins. Comparisons with existing test results are performed, and they show good agreement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.763-771
• /
• 2000

Reticle systems, which are widely used in infrared (IR) missile seekers, are considered to be the classical approach for estimating the position of a target in the field of view (FOV). This paper presents an effective simulation tool that gives tracking results of the concentric annular ring reticle seeker. We construct the concentric annular ring reticle seeker on Matlab-Simulink for a dynamic simulation. Our simulation model provides tracking results in various cases, and is applicable to the study of the development of the advanced seekers. While false targets such as flares are presented in the FOV, simulation results show that the existing seeker cannot determine a precise target location. In order to decrease the susceptibility to countermeasures such as flares, we propose an efficient counter-countermeasure using the correlated relationship of modulated signals and the references. We have ascertained that the reticle seeker using our technique make more effective target tracking than previous seekers.

• Fire Science and Engineering
• /
• v.25 no.4
• /
• pp.35-41
• /
• 2011

Casualties due to toxic smoke products have been reported as major fire damage. There are various tests in order to evaluate toxic smoke from a fire at home and abroad, and KS F 2271 as a test of the gas hazard of building finish materials has been conducted in Korea. The current test of the gas hazard exposes rodent, laboratory rat, to smoke gases to evaluate combustion gas toxicity by measuring acting time of that. this study performed a test of the gas hazard for combustible polymer material, Urethane and rubber flooring, and determined gases with the FT-IR. Quantitative results compared with standard value defined in BS6853 and toxicity index (R) was calculated. Using relative comparison with animal test and the toxicity index, We tried a variety of toxicity evaluation by correlation analysis of two tests.

• Journal of Wetlands Research
• /
• v.11 no.1
• /
• pp.15-27
• /
• 2009

To reveal conservation value of Sowhangbyungsan-neup among wetlands in Mt. Odae designated as a Ramsar convention site in 2008, ecological characteristics were investigated. The maximum depth of sediment was 86cm and average at central part was 56cm. Average pH of water was 5.8 and this indicates that this wetland has the characteristics between bog and fen. Average electron conductivity was $11{\mu}S$/cm, which is the lowest among Korean wetlands. Nutrient status was oligotrophic based on contents of cation, nitrate, ammonia, soluble reactive phosphorus in water. Out-flow of water was related with the 3 day cumulative precipitation. Soil texture was loam and nutrient level was very low. Vascular plants of 45 family, 95 genus, 121 species, 2 subspecies, 16 variety, 4 forma, total 121 taxa were recorded. Main plant communities on Sphagnum base were Osmunda cinnamomea community, Carex dispalata community and Carex curta community. The results indicated that this wetland has very different ecological characteristics than others in Korea and deserves conservation value well. Also, this study revealed that there is no evident threatening factor and this wetland will have characteristics of fen continuously in near future.