• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.489-495
• /
• 2016

This study focuses on a detailed ball-bearing model for spur gears. The nonlinear ball-bearing stiffness with radial clearance is derived and calculated. The bearing stiffness is used to the 3-degree-of-freedom (DOF) spur gear system model. The mode characteristics of the gear system model are analyzed and verified by performing finite-element analysis (FEA). From the results, the bearing stiffness on the radial clearance was more sensitive under low-load conditions compared to high-load conditions. The bearing stiffness significantly affected the gear dynamics in the low-frequency region, while the mesh stiffness affected the high natural frequency.

• Journal of KSNVE
• /
• v.23 no.2
• /
• pp.7-11
• /
• 2013

• Journal of KSNVE
• /
• v.23 no.2
• /
• pp.27-35
• /
• 2013

• Journal of KSNVE
• /
• v.23 no.1
• /
• pp.28-35
• /
• 2013

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1391-1394
• /
• 2007

In order for Hypoid gear development. Gears are required to sustain heavy loads or on applications where the gear box is made or a material with a different coefficient of thermal expansion form that or the gears and shafts, it is desirable to make a deflection and contact check under load. The deflection test is performed in the actual gear mounting using completely processed gear. This test should cover the full operating range of gear loads from no load to peak load. Under peak load the contact pattern should extend to the tooth boundaries without showing a concentration of the contact pattern at any point on the tooth surface.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.239-243
• /
• 2006

A noise/vibration of the forklift happens in the driving axle to charge the drive and are examined closely by an each reason. After this study consider a reduction method of a noise/vibration about the gear, axle, bearing and others, the purpose of this study is to reduce a noise/vibration for a stability of the total system. From the data to be measured through all experimental method, the problems of the gear, axle, bearing, housing and others are examined closely, and the forklift is derived the model to be the engineering. The Mechanism of the problem occurrence is examined through a palametric research about an each influence factor. Lastly, the resuls of this study propose the model to he improved.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.602-603
• /
• 2014

A gearbox can be regarded as a self-exciting dynamic system, which has a vibration source. Transmission error (TE) is considered to be an main excitation source for gear noise and vibration. The TE excitation is transmitted through the gears, shafts, bearings, and housings. Thus, an experimental approach to each mechanical parts is useful in order to understand and evaluate the dynamic behaviour of a gearbox. This study is focused on the transmission and vibration characteristics of a helical gear system in development stage. In addition, by considering the tolerance factors and resonance characteristics, the vibration response of actual dynamic system is analysed.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.635-640
• /
• 2001

The small gear reductioner noise is caused by gear accuracy, assembling errors, and gear backlash. This main study is an investigation on noise quality of the small gear reductioner through the change of gear backlash. In this study included Gear design parameters related the small gear reductioner, the knowledge of rattle noise related gear backlash, and the experimentation results of the small reductioner noise through change of gear backlash. At last, this study propose the least method of the small gear reductioner noise that is caused by suitable existence of gear backlash.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.243-251
• /
• 1998

A method of establishing the tooth modification for gear transmission of vehicles to reduce gear whine noise, caused by tooth impact phenomenon of mating gear, is introduced. The major causes of tooth impact are due to the deflections of gear teeth and shafts of transmission with the loaded condition including various kinds of manufacturing errors. The theoretical shape of tooth surface to avoid tooth impact is derived by the amount of elastic deformation of gear teeth and shaft and overall manufacturing error of machine tool. The surface function is converted with respect to the conventional commercial data usually communicated to the gear inspection system. The proposed method is applied to the gearbox of four wheel drive vehicle and shows the gear whine noise decreased to the 8 dB in the sound level.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.355-362
• /
• 2021

Since coaxial magnetic gears use non-contact power transmission, friction, wear, noise, and heat generated in the power transmission process of existing mechanical gears can be minimized. Currently, research for application to various industries is being actively conducted, but among the characteristics of coaxial magnetic gears, the problem of rapidly decreasing torque density at a high gear ratio was discussed. This paper proposes a direction for multiple gear combination using low gear ratio coaxial magnetic gears with high torque density. In order to confirm the effectiveness of the method, the torque density was compared with a single high gear ratio model, and the combination and design direction of multiple coaxial magnetic gears were shown.