• Journal of the Korean Society of Radiology
• /
• v.10 no.7
• /
• pp.521-529
• /
• 2016

Since Gamma Knife(R) radiosurgery(GKRS) is based on a single-fraction high dose treatment strategy, independent verification for the results of Leksell GammaPlan(R) (LGP) is an important procedure in assuring patient safety and minimizing the risk of treatment errors. Several verification methods have been developed and reported previously. Thus these methods were tested statistically and tried on Leksell Gamma Knife(LGK) target treatments through the embodiment of the previously proposed algorithms(PPA). The purpose of this study was to apply and evaluate the accuracy of verification methods for LGK target treatments using PPA. In the study 10 patients with intracranial lesion treated by GKRS were included. We compared the data from PPA and LGP in terms of maximum dose, arbitrary point dose, and treatment time at the isocenter locations. All data were analyzed by Paired t-test, which is statistical method used to compare two different measurement techniques. No statistical significance in maximal dose at 10 cases was observed between PPA and LGP. Differences in average maximal dose ranged from -0.53 Gy to 3.71 Gy. The arbitrary point dose calculated by PPA and LGP was not statistically significant too. But we found out the statistical difference with p=0.021 between TMR and LGP for treatment time at the isocenter locations. PPA can be incorporated as part of a routine quality assurance(QA) procedure to minimize the chance of a wrong overdose. Statistical analyses demonstrated that PPA was in excellent agreement with LGP when considering the maximal dose and the arbitrary point dose for the best plan of GKRS. Due to the easy applicability we hope PPA can be widely used.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.4
• /
• pp.398-405
• /
• 2001

The rivet joint has typical structural feature that can be initiation site for the fatigue crack due to the combination of local stress concentration around rivet hole and the moisture trapping. From a viewpoint of structural assurance, it is crucial to evaluate the size of crack around the rivet holes by appropriate nondestructive evaluation techniques. Lamb wave that is one of guided waves, offers a more efficient tool for nondestructive inspection of plates. The neural network that is considered to be the most suitable for pattern recognition has been used by researchers in NDE field to classify different types of flaws and flaw sizes. In this study, clack size evaluation around the rivet hole using the neural network based on the back-propagation algorithm has been tarried out by extracting some features from the ultrasonic Lamb wave for A12024-T3 skin panel of aircraft. Special attention was paid to reduce the coupling effect between the transducer and the specimen by extracting some features related to time md frequency component data in ultrasonic waveform. It was demonstrated clearly that features extracted from the time and frequency domain data of Lamb wave signal were very useful to determine crack size initiated from rivet hole through neural network.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.116-124
• /
• 2011

In this study, a new method to estimate the bridge deflection is developed by using Wireless Tilt Sensor. Most of evaluations of structural integrity, it is very important to measure the geometric profile, which is a major factor representing the global behavior of civil structure, especially bridges. In the past, Because of the lack of appropriate methods to measure the deflection curve of bridges on site, the measurement of deflection had been done restrictly within just a few discrete points along the bridge. Also the measurement point could be limited to locations installed with displacement transducers. So, in this study, the deflection of the structure was measured by wireless tilt sensor instead of LVDT(Linear Variable Differential Transformer). Angle change of tilt sensor shows structural behavior by the change of the resistor values which is presented to voltage. Moreover, the maximum deflection was calculated by changing the deflection angle which was calculated as V(measured voltage) ${\times}$F(factor) to deflection. The experimental tests were carried out to verify the developed deflection estimation techniques. Because the base of tilt measuring is the gravity, uniform measurement is possible independent of a measuring point. Also, measuring values were showed very high accuracy.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.12
• /
• pp.1765-1777
• /
• 2002

본 연구에서는 현재 국내의 서울시내에 거주하는 모터사이클을 타는 만20세 이상의 남성을 대상으로 모터사이클복에 대한 착용실태와 불만사항들을 조사하고 이를 연령별, 모터사이클 유형별로 비교 분석하여 착용감 및 안전성이 향상된 모터사이클복 개발을 위한 기초자료를 제시 하고자 하였다. 설문조사는 2002년 1월~3월까지 3개월간 총 400부를 배부한 후 회수하고, 이 중 262부를 분석자료로 사용하여 빈도 및 백분율, 평균 등의 기술 통계치를 얻어 전반적인 착용현황을 알아보고, 교차분석을 실시한 후 X$^2$-검증을 실시하여 연령별, 모터사이클 유형별, 운행경력 별로 통계적인 차이를 비교 분석하였다. 1. 모터사이클복의 착용실태 및 불만사항 전반에 관한 조사결과, 조사대상자는 20대~40대의 운행경력은 5년 이상인 전문 라이더들이 많았으며 모터사이클의 배기량은 400cc이상이 가장 높게 나타났고, 모터사이클 유형은 로드 바이크가 가장 높게 나타났고, 이용목적은 레져.취미용, 선호하는 모터사이클복 아이템별 소재는 원피스와 슬랙스의 경우에는 피혁소재가 쟈켓의 경우에는 텍스타일 소재가 높게 나타났다. 아이템별 소유는 쟈켓과 투피스가 높게 나타났고, 보호구가 필요하다고 생각되는 신체부위는 상의에서는 가슴과 팔꿈치, 하의에서는 무릎으로 나타났으며, 무릎보호대의 소유도가 가장 높게 나타났다. 모터사이클복 주된 착용목적은 '부상방지', 모터사이클복을 착용하지 않는 이유는 '움직이기가 불편해서' '가격이 비싸서' '여름철에 더워서'가 각각 높게 나타났다. 모터사이클복에 대한 불만족도에서 동작적합성과 사이즈에 대한 불만도가 높게 나타났고, 모터사이클복소재 및 내부 장착 보호장구의 경량화가 요구되었으며, 모터사이클 쟈켓의 치수부적합부위는 소매길이가 가장높게 나타났다. 2. 전체 응답자의 연령을 20대, 30대, 40대 이상으로 나누어 연령별 차이를 비교한 결과 각각의 문항에 대해서 모두 연령대별로 유의차가 인정되었다. 3. 모터사이클복 아이템별 선호소재 문항에서 원피스와 쟈켓에서 모터사이클 기종별 유의차가 나타났는데, 비즈니스 기종에 서는 텍스타일 소재를, 아메리칸크루져 기종에서는 피혁소재를 선호하였다. 로드바이크와 오프로드 기종에서는 원피스는 피혁소재를 선호하였고, 쟈켓은 텍스타일 소재를 선호하는 것으로 나타났다.

• Journal of dental hygiene science
• /
• v.17 no.6
• /
• pp.472-480
• /
• 2017

The purpose of this study was to investigate Staphylococcus epidermidis contamination on hands of 20 dental hygienists and 140 equipment surface of 20 dental clinics in a local area, from July to August 2017. The degree of S. epidermidis contamination was measured using a hand plate and a rodac plate and then cultured at $35^{\circ}C$ for 24 hours. Based on hand plate criteria, hand contamination was classified into low, middle, and high groups. Analysis of the variance (ANOVA) of the contamination level of the hand parts of the group surface contamination level of the dental clinic equipment was descriptive statistics after clustering lock count. S. epidermidis contamination was moderate in 55% of the hands of dental hygienists. The area of contamination was 29.45 colony-forming units (CFU) on the palm, followed by the middle finger 7.8 CFU, ring finger 6.4 CFU, and thumb 6 CFU. Medical equipment surface contamination was showed that 3-way handle 4.45 CFU, computer mouse 3.37 CFU, mirror handle 1.60 CFU were higher than other areas. The group with high hand contamination had a high positive correlation with the S. epidermidis contamination of the hand. S. epidermidis contamination level was higher on hands than on the medical equipment surface contamination. Therefore, medical staff should recognize the importance of hand hygiene which should be practiced in the manner suggested by World Health Organization. In addition, the medical team needs to be responsible for performing infection control tasks, implementing infection management guidelines and providing systematic education on infectious disease management.

• Korean Journal of Optics and Photonics
• /
• v.28 no.4
• /
• pp.166-171
• /
• 2017

Hydrogen gas is a green energy sources because it features no emission of pollutants during combustion. But hydrogen gas is very dangerous, being flammable and very explosive. Hydrogen gas detection is very important for the safety of a nuclear power plant. Hydrogen gas is generated by oxidation of nuclear fuel cladding during a critical accident, and leads to serious secondary damage in the containment building. This paper discusses the development of a Raman lidar system for remote detection and measurement of hydrogen gas. A small, portable Raman lidar system was designed, and a measurement algorithm was developed to quantitatively measure hydrogen gas concentration. To verify the capability of measuring hydrogen gas with the developed Raman lidar system, experiments were carried out under daytime outdoor conditions by using a gas chamber that can adjust the hydrogen gas density. As results, our Raman lidar system is able to measure a minimum density of 0.67 vol. % hydrogen gas at a distance of 20 m.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.69-75
• /
• 2015

Road facilities for safe driving were designed for drivers to distinguish them during day and night, but they cannot play their role when the weather becomes worse. Recently, the road facilities have been designed by using electric and electronic technology so that they can be displayed well at a long distance, but they should be replaced very often due to their frequent breakdown. So, there are many problems in traffic calming and maintenance. In this study, to solve the above problems, semi-permanent LED beacon light was installed in the area where traffic accident are frequent, and monitoring system was developed so that the LED beacon light can be maintenanced by connecting with system. For the above installation and development, system was based on window operating system and it was developed for worker to operate it by using P.C. through connecting with wireless local area network. The result of this study led to analyzing state information on the battery of field-installed LED beacon light in real time, and manegement to effectively by predicting their life cycle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.11
• /
• pp.1725-1732
• /
• 2015

The bactericidal effects of 642, 521, and 461 nm LED were investigated on Escherichia coli O157:H7 and Staphylococcus aureus strains in TSB with pH 7.2, 4.0, and 3.5 for 10 h at $15^{\circ}C$. The bactericidal effect of 461 nm blue LED was the most pronounced compared to 642 nm and 521 nm LEDs at pH 3.5. When E. coli was exposed to pH 3.5 with 461 nm LED, populations of E. coli O157:H7 ATCC 43894 and 35150 decreased by 4 and 5 log CFU/mL for 2 h, respectively. Populations of E. coli ATCC 8739 decreased by 5 log CFU/mL for 2 h. Further, S. aureus ATCC 27664, 43300, and 19095 were inactivated by 4, 5 and 5 log CFU/mL for 2 h, respectively, at pH 3.5 with 461 nm LED. In conclusion, combined treatment with 461 nm LED and acidic conditions at low-temperature ($15^{\circ}C$) showed the greatest antimicrobial effects. This study suggests that LEDs may be potentially used as a method to maintain the safety of the food preservation technology.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.79-85
• /
• 2011

The problem of evacuating pedestrians from a room or channel under panic conditions is of obvious importance in daily life. In recent years, several computer models have been developed to simulate pedestrian dynamics. Understanding evacuation dynamics can allow for the design of more comfortable and safe pedestrian facilities. However, these models do not take into account the type and state of mind of pedestrians. They deal with pedestrians as particles and the state of mind as a social force, which is represented by conservative and long-range interactions between individuals. In this study, I used the lattice model proposed in my previous study to explore the evacuation behavior of pedestrians with morality. In this model, three types of pedestrians are considered: adults, children, and injured people. Collisions between adults and children result in injured people. When the number of injured people continuously in contact with each other reaches a given value k, the injured people are removed from the lattice space. This situation is the same as that in which pedestrians start stepping over injured people. This behavior was interpreted as the morality of pedestrians. Simulations showed that the evacuation showed down and eventually became jammed owing to the injured people acting as "obstacles" in relation to the morality k.

• Convergence Security Journal
• /
• v.15 no.7
• /
• pp.111-118
• /
• 2015

The violent crime has increased dramatically in our society. This is because our society has to change quickly. Strong police force, but this is not enough to solve the crime. And there are a lot of police to investigate the situation difficult to go out to the crime scene. So inevitably increase in the risk of crime. Researchers have conducted a number of studies to solve this problem. However, the proposed study how realistic are many points still lacking. herefore, we to take advantage of smartphones and high-speed Internet access technology to provide security services using the push service for rapid identification and crime situation in this study. Therefore, we would like to provide rapid service to identify criminal security situation using smart-phone app and push services on the high speed internet environments. The proposed system is to record the voice information received from the smart phone near the user presses the hot key is set in advance in real-time, and stores the audio information stored in the LBS information to the server through the authentication procedure. And the server uses the stored voice data and LBS Push service information to inform their families. We have completed the design of the proposed system. And it has implemented a smart phone app, the user authentication server. And using the state in which the push service from the authentication server by transmitting a message to a user to inform a family. But more must examine whether the proposed research is relevant in future studies.