• Journal of Korea Water Resources Association
• /
• v.53 no.12
• /
• pp.1071-1079
• /
• 2020

For integrated water management, it is essential to secure basic data such as the amount of agricultural water intake. The river water intake through the intake weir is carried out through the agricultural irrigation canal, and a method for measuring the quantity of water intake is required to suit the characteristics of the measuring points. In this study, the accuracy of the calculated flow data was determined by applying a microwave water surface current meter. The microwave water surface current meter is a method of calculating surface velocity using doppler effect, which is mainly used in high-velocities situations such as flood. Surface velocity is difficult to represent the average velocity of the entire section at low dicharges or high wind speeds, it is considered to be low in continuous utilization throughout the year, and it is necessary to verify whether the measurement using an microwave water surface curren meter is appropriate in agricultural irrigation canal. The data measured with an microwave water surface curren meter were compared with the actual flow data to calculate the intake data in agricultural irrigation canal. In agricultural irrigation canal, the low-level discharge calculated using an microwave water surface current meter at a minimum velocity of about 0.3 m/s and a minimum discharge of about 1.0 m3/s or higher was found to have a high tendency and accuracy compared to the standard discharge, especially when the high discharge was high. Although effective results can be obtained in terms of quantity at low discharge, it is deemed that subsequent studies are needed to calculate the average discharge of the cross section at low discharge, given that the trend of data is unstable. Through this study, it is suggested that it is appropriate to calculate the amount of water intake through the microwave water surface current meter in artificial waterways with a certain discharge or higher, so it is expected to be widely distributed as a method for measuring river water intake.

• Journal of Life Science
• /
• v.34 no.7
• /
• pp.500-508
• /
• 2024

Recently, there has been increasing interest in enhancing the indoor air quality, particularly in response to the growing utilization of public facilities. The focus of this study was on assessing the efficacy and safety of an air sterilizer equipped with electrolytic salt catalysts. To that end, we evaluated the antimicrobial activity of the vapor spraying from the air sterilizer and its cytotoxicity in condensed form on human cell lines (HaCaT, BEAS-2B, and THP-1). Against the test organisms, which comprised five bacterial strains (Staphylococcus aureus, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa, Salmonella typhimurium) and one fungal strain (Candida albicans), the air sterilizer exhibited relatively high antimicrobial activities ranging from 10.89 to 73.98% following 1 and 3 hr of vapor spraying, which were notably time-dependent. Importantly, cytotoxicity assessments on human cells indicated no significant harmful effect even at a 1.0% concentration. Comprehensive safety evaluations included morphological observations, gene expression (Bcl-2, Bax) tests, and FACS analysis of intracellular ROS levels. Consistent with previous cytotoxicity findings, these estimates demonstrated no significant changes, highlighting the air sterilizer's safety and antimicrobial activities. In a simulated 20-hr operation within an indoor environment, the air sterilizer not only showed an 89.4% removal of total bacteria but also a 100.0% removal of Escherichia sp. and fungi. This research outlines the potential of the developed electrolytic salt catalyst air sterilizer to effectively remove indoor microbial pollutants without compromising human safety, underscoring the solution that it offers for improving indoor air quality.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.20-32
• /
• 1982

This survey was conducted to investigate the present status of farm tractor utilization for obtaining a basic reference to the establishment of the government's agricultural mechanization strategies. Thirty two counties from the eight provinces except Jeju were covered in this study. From these selected areas, 433 sample farms having farm tractor were taken to obtain the general informations by the enquete, and 93 sample farms among them to investigate the status of daily tractor use in the year of 1980. The analyzed results are summarized as follows: 1. Farm tractors owned by the rice-oriented farms holds 71.5 percent of the total number of tractors the livestock-oriented farms 17.0 percent, and the orchard-oriented farms 7.0 percent. Among the farm tractors 64.3 percent was a large size (46ps) and 35.7 percent a small size(19~23ps). 2. Most of the tractors surveyed were equipped with the essential attachments such as plow and rotavator. About 18 percent of the tractor owners had no trailer, which seemed too high considering the large percentage of tractor use for transportation. The availability of other attachments was very low except a grader on the rice-oriented farms and a hay harvester and a front loader on the livestock-oriented farms. 3. The average size of farm was 3.9 hectare for the rice-oriented farms, 13.9 hectare for the livestock-oriented farms and 7.4 hectare for the orchard-oriented farms. It was obious that the average farm size of was too small compared to the theoretical machine capacity of the tractors. 4. About 70 percent of the tractor operators were in the age of twenties and thirties. About 90 percent of them had an educational level of middle school graduate or above even though their technical level was very low. 5. Any particular problem in tractor use was not found in this survey. From the farmer's preference for purchasing a new tractor, however, it is estimated the demand on a 20-30ps tractor will be more increased. 6. The average annual use of tractor was of about 100 days or 400 hours. It appeared that the rice-oriented farms used most with 412.4 hours per year, and followed by the livestock-oriented farms with 403.6 hours, the orchard oriented farms with 377.7 hours. 7. Among the total hours of tractor use, 47.3 percent was for transportation, and 41.6 percent was for plowing and rotary tillage. The largest portion of the annual tractor use was taken by transportation on the livestock-oriented farms, by land preperation on the rice-oriented farms, and by loading and chemical spraying on the orchard-oriented farms. 8. The hours of tractor use had a peak in May. The hours of use for own farm was remarkably different among the different farm oriented, but there was no considerable difference between the too different sizes of tractor. 9. The hours of tractor use decreased as the age of the operator or the educational level increased. The reason might be that the operators who had a high educational level or were older had a tendency of disliking custom works. 10. The average custom use of tractor was 171.3 hours per year, and the ratio of custom work was 63.7 percent on the rice-oriented farms, 31.7 percent on the livestock-oriented farms and 22.4 percent on the orchard-oriented farms. Among the custom works, the most popular one was the grader leveling. 11. The charge on custom work was about 40,000 Won per hectare for plowing and rotary tillage, and it was the most expensive in the southeastern region, and next followed by the southwestern region. 12. The average plowing capacity of the small tractor was 7.8 hours per hectare in the paddy field, and that of the large tractors was 4.3 hours per hectare. The average rotary-tilling capacities of the small and the large tractors were 6.5 and 4.3 hours per hectare, in the paddy field respectively.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.101-108
• /
• 2012

This study was conducted to confirm the mass production of male pupae and sex-limited larval marking variety as a host for synnemata production of Isaria tenupes in RDA(Rural Development Administration). Silkworm pupation, infection rate and synnemate formation of I.tenuipes were examined. Among the silkworm varieties tested, male Hansaengjam showed the highest pupation rate at 98.7%. I. tenuipes infection rate of larvae of newly-exuviated 5th instar silkworm was 83.7 ~ 90.4% in the spring rearing season and 91.7 ~ 96.6% in the autumn rearing season. Synnemata production of I. tenuipes was execellent in female Yangwonjam with an incidence rate of 99.5% followed by male Yangwonjam(99.5%) and Baegokjam(99.4%) in the spring and autumn rearing season. Synnemata living weight ranged from 0.93 ~ 1.25 g in the spring rearing season. The female Hansaengjam had the heaviest synnemata weight(1.25 g). Synnemata dry weight ranged from 0.27 ~ 0.35 g in the spring rearing season. The female Yangwonjam had the heaviest synnemata weight(0.35 g).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.5
• /
• pp.49-65
• /
• 2019

This study was carried out to investigate the domestic and international development of a new cultivar of the Rose of Sharon (Hibiscus syriacus L.), the Korean national flower, and the protection of the new plant variety. In addition, it will be used as basic data for the expansion of domestic distribution, promoting oversea export, and expanding the range of landscape architectural use. A total of 97 varieties received plant variety protection rights from the Korea Seed & Variety Service from 2004 to 2018. The selection criteria were plants having unique flowers, growth habits, and variegated leaves. Some cultivars with unique features, such as flower size, shape, and red eyes were available for focus planting. Plant varieties with tall and strong growth patterns have been highly valuable for street and focus planting. Cultivars with dwarf stems and compact branches are utilized for pot planting and bonsai. The protected cultivars were mostly single flower varieties, with two semi-double flowers. There were 57 cultivars of pink flowers with red eyes and 21 cultivars of white flowers with red eyes. There were 61 cultivars developed by crossing, 23 cultivars through interspecific hybridization and 7 cultivars developed through radiation treatment and mutation. The Hibiscus cultivars registered to the United States Patent and Trademark Office (USPTO) consisted of seven cultivars each from the United States, the United Kingdom, and the Netherlands, four from South Korea, and three from Belgium. The Hibiscus cultivars registered to the European Community Plant Variety Office (CPVO) consisted of 16 cultivars from France, 9 from the Netherlands, 5 from the UK and 1 from Belgium. The cultivars that received both plant patent and plant breeder rights in the United States and Canada were 'America Irene Scott', 'Antong Two', 'CARPA', 'DVPazurri', 'Gandini Santiago', 'Gandini van Aart', 'ILVO347', 'ILVOPS', 'JWNWOOD 4', 'Notwood3', 'RWOODS5', 'SHIMCR1', 'SHIMRR38', 'SHIMRV24', and 'THEISSHSSTL'. 'SHIMCR1' and 'SHIMRV24' acquired both domestic plant protection rights and overseas plant patents. The 14 cultivars that received both US plant patents and European protection rights were 'America Irene Scott', 'Bricutts', 'DVPAZURRI', 'Gandini Santiago', 'Gandini van Aart', 'JWNWOOD4', 'MINDOUB1', 'MINDOUR1', 'MINDOUV5', 'NOTWOOD3', 'RWOODS5', 'RWOODS6', 'Summer Holiday', and 'Summer Night'. The cultivars that obtained US patents consisted of 18 cultivars (52.9%) with double flowers, 4 cultivars (11.8%) with semi-double flowers, and 12 cultivars (35.3%) with single flowers. The cultivars that obtained European new variety protection rights, consisted of 11 cultivars (34.3%) with double flowers, 12 cultivars (21.9%) with semi-double flowers, and 14 cultivars (43.8%) with single flowers. In the future, new cultivars of H. syriacus need to be developed in order to expand domestic distribution and export abroad. In addition, when developing new cultivars, it is required to develop cultivars with shorter branches for use in flower beds, borders, hedges, and pot planting.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.2
• /
• pp.112-118
• /
• 2015

This study was carried out to offer basic information for the promotion of the goat industry and the improvement of mountainous-pasture management by investigating seasonal changes in forage and livestock productivity according to the grazing-pasture type. The forage productivity of rangeland was the highest (p < 0.05) in summer and decreased in autumn; but that of pasture was the largest (p < 0.05) in spring and had relatively stable productivity with minor seasonal differences, although it decreased slightly in autumn. The dry matter content was not seasonally different at pasture, but it was changeable from spring to autumn at rangeland. The crude protein content increased in autumn at pasture (p < 0.05), and decreased in summer and autumn compared with spring at rangeland. The crude fiber content was lower and the ether extract was higher at pasture compared with rangeland. The average daily gain of the goats was different depending on forage productivity and pasture type; consequently, the lowered forage productivity at rangeland compared with pasture means that rangeland needs to be changed or improved to a pasture type that provides a more effective grazing system for goats.

• Journal of radiological science and technology
• /
• v.30 no.2
• /
• pp.167-175
• /
• 2007

There are some positive effects by the introduction of PACS(Picture Archiving Communication System). This study is to analyze the mutual relation between before and after of the introduction of PACS in terms of the environment effect. It is supposed to cause the reduction of developing and fixing wastewater according to the increase in the rate of a non-film. This study will also show the amount of wastewater. Target places were the department of image medicine(diagnostic radiation) of the general hospitals in Seoul and Gyeonggi-Do, which are equiped with full PACS. The authors examined questionnaires on the number of projection, the number of indirect projection, the amount of the film used, the number of radiation image CD loan, the amount of the developing and fixing solution used, the change of the amount of fixing wastewater. According to the analysis, we analyzed the change of the amount of developing and fixing solution per a film and the change of the amount of developing and fixing wastewater which is supposed to be reduced proportionally by the introduction of PACS. We got conclusion as below after analyzing 8 hospitals except the largest and the least amount of examination, film used, developing and fixing solution and the amount of developing and fixing wastewater in order to decrease the deviation from 10 general hospitals located in Seoul and Gyeonggi-Do. We compared data one year before adopting PACS Versus 3 years after adopting PACS. 1. The frequences of examination increased to 7,357.7 cases per month but the amount of film used decreased to 90%, from 42,774.4 to 4,181.88 after adopting the PACS. 2. 3 years after adopting PACS, monthly average amount of developing solution used decreased to 92% and the monthly average amount of fixing solution decreased to 86%. 3. Monthly average amount of developing solution used per film increased to 1.49 times and fixing solution increased as much as three times. 4. Monthly average wastewater for developing decreased to 88% and wastewater for fixing decreased up to 87%. 5. Monthly average wastewater for developing per film increased to 3.77 times and wastewater for fixing increased to 3.85 times. Although the amount of film used and the amount of developing and fixing wastewater affected by the reduction of the developing and fixing solution became less on the whole by introduction of PACS, they did not decrease proportionally. Moreover the amount of the developing and fixing solution used and the amount of developing and fixing wastewater per a film increased. That means the expectation for an environmental improvement differs from the actual condition.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.1
• /
• pp.85-102
• /
• 1993

This study was conducted to achieve develop organic sludge recycling technology as sludge make a prey of earthworm. Therefore sludge treatment and recycling technology is an important field by which this research project to solve landfill site and reduction treatment expense using vermicomposting treatment process on the waste sludge from the biological wastewater treatment plant. In experimental results on the optimum conditions of vermicomposting of nightsoil treatment sludge, survival rates were observed 98.3% in temperature of $10-15^{\circ}C$, 75% in pH 5.8-7.5 and 100% in density of $1/79.8cm^3$, respectively. Liveweight changes of earthworm were increased 266% in temperature of $10-15^{\circ}C$, 227% in pH 5.8-7.5 and 325 % in density $1\;cap./79.8cm^3$, respectively. Casting production rate were generated 0.06 g/cap./day in temperature $20-25^{\circ}C$, 0.065 g/cap./day in pH 5.8-7.5 and 0.1 g/cap./day in density $1\;cap./79.8cm^3$, respectively. Cocoon production numbers were observed 3.8 ea. /cap.in $10-15^{\circ}C$, 2.95 ea./cap.in pH 5.8-7.5 and 3.16 ea./cap. in $1\;cap./79.8cm^3$ during 6 weeks, respectively. pH was droped by 6.2 to 5.7, volatile solids was decreased by 2.9%, $NH_3-N$ were also reduced by $6.984{\mu}g/g$ to $0.991{\mu}g/g$. $NO_3-N$, however, were increased by $3.213{\mu}g/g$ to $7.706{\mu}g/g$. Fecal coliforms and pathogenic bacteria are analyzed by microbiological method to assess public health safety of casting. Number of fecal coliform groups were reduced 88.6-99.1% (Avg. 95.7%) approximately. And pathogenic bacteria such as Salmonella, Shiegella and Vibrio, were not isolated from the earthworm cast.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.508-516
• /
• 2010

An autonomous and automatic home mess-cleanup robot is newly developed in this paper. Thus far, vacuum-cleaners have lightened the burden of household chores but the operational labor that vacuum-cleaners entail has been very severe. Recently, a cleaning robot was commercialized to solve but it also was not successful because it still had the problem of mess-cleanup, which pertained to the clean-up of large trash and the arrangement of newspapers, clothes, etc. Hence, we develop a new home mess-cleanup robot (McBot) to completely overcome this problem. The robot needs the capability for agile navigation and a novel manipulation system for mess-cleanup. The autonomous navigational system has to be controlled for the full scanning of the living room and for the precise tracking of the desired path. It must be also be able to recognize the absolute position and orientation of itself and to distinguish the messed object that is to be cleaned up from obstacles that should merely be avoided. The manipulator, which is not needed in a vacuum-cleaning robot, has the functions of distinguishing the large trash that is to be cleaned from the messed objects that are to be arranged. It needs to use its discretion with regard to the form of the messed objects and to properly carry these objects to the destination. In particular, in this paper, we describe our approach for achieving accurate localization using RFID for home mess-cleanup robots. Finally, the effectiveness of the developed McBot is confirmed through live tests of the mess-cleanup task.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.4
• /
• pp.242-255
• /
• 2006

In the recent years, Popularization of mobile devices such as Smart Phones, PDAs and MP3 Players causes rapid increasing necessity of Power management technology because it is most essential factor of mobile devices. On the other hand, despite low price, hard disk has large capacity and high speed. Even it can be made small enough today, too. So it appropriates mobile devices. but it consumes too much power to embed In mobile devices. Due to these motivations, in this paper we had suggested methods of minimizing Power consumption while playing multimedia data in the disk media for real-time and we evaluated what we had suggested. Strict limitation of power consumption of mobile devices has a big impact on designing both hardware and software. One difference between real-time multimedia streaming data and legacy text based data is requirement about continuity of data supply. This fact is why disk drive must persist in active state for the entire playback duration, from power management point of view; it nay be a great burden. A legacy power management function of mobile disk drive affects quality of multimedia playback negatively because of excessive I/O requests when the disk is in standby state. Therefore, in this paper, we analyze power consumption profile of disk drive in detail, and we develop the algorithm which can play multimedia data effectively using less power. This algorithm calculates number of data block to be read and time duration of active/standby state. From this, the algorithm suggested in this paper does optimal scheduling that is ensuring continual playback of data blocks stored in mobile disk drive. And we implement our algorithms in publicly available MPEG player software. This MPEG player software saves up to 60% of power consumption as compared with full-time active stated disk drive, and 38% of power consumption by comparison with disk drive controlled by native power management method.