• The Korean Journal of Food And Nutrition
• /
• v.14 no.2
• /
• pp.120-125
• /
• 2001

The inhibitory effects of xanthine oxidase by the methanol extract and the solvent fractions obtained from persimmon leaves were investigated. The inhibition ratio of xanthine oxidase was 78% by addition of 2.0mg/ml of the methanol extract. Among the solvent fractions, the ethylacetate fraction showed the strongest inhibitory effect against the xanthine oxidase, followed by the hexane fraction. The effect increased with addition of the ethylacetate fraction. At a concentration of 2.0mg/ml of the ethylacetate fraction, 65% of the enzyme activity decreased within 1.0 min of incubation with xanthine oxidase. But the activity of xanthine oxidise did not decrease significantly by the length of the incubation time.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.138-145
• /
• 2009

Custom medical treatment is being widely adapted to lots of medical applications. A technology for 3D modeling is strongly required to fabricate medical implants for individual patient. Needs on true 3D CAD data of a patient is strongly required for tissue engineering and human body simulations. Medical imaging devices show human inner section and 3D volume rendering images of human organs. CT or MRI is one of the popular imaging devices for that use. However, those image data is not sufficient to use for medical fabrication or simulation. This paper mainly deals how to generate 3D geometry data from those medical images. A new image processing technology is introduced to reconstruct 3D geometry of a human body vacancy from the medical images. Then a surface geometry data is reconstructed by using Marching cube algorithm. Resulting CAD data is a custom 3D geometry data of human vacancy. This paper introduces a novel 3D reconstruction process and shows some typical examples with implemented software.

• Journal of Wetlands Research
• /
• v.14 no.2
• /
• pp.277-288
• /
• 2012

Estuary is unique habitat ground under substantial changes of water quality, river side, bed material, and micro topography. Construction of SinGok underwater weir with excessive dredging for downstream of weir has changed hydraulic conditions of Han River. This study investigates spatial changes of estuary and expansion process of vegetation on sandbar for JangHang estuary in Han River through analysis of physical and ecological characteristics. As a result of investigation, we found that area of sandbar in JangHang estuary is expanded six times compared between 1985 and 2006, and area of Phragmites australis is gradually decreased while area of Salix subfragilis Anderson. is increased. Also the analysis result of soil layer shows that the Jang-Hang wetlands are created by effect from river, and woody plants are settled from middle part of wetlands, then spread to upper and lower part of wetlands.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.94-94
• /
• 2011

본 논문은 "차세대 반도체용 진공공정의 실시간 측정/진단/제어 기술개발"과제의 제 3 세부과제 "스마트형 진공 배기 진단 제어 시스템 개발"의 주요 연구 실적을 소개한다. 본 세부과제는 (1)진공펌프 및 배기 시스템의 다중 상태변수 측정 장치 개발, (2)공정별 펌프 상태 및 공정 조건 data base 구축 및 진단 알고리즘 개발(e-Diagnostics Level 2 FDC 수준), (3)공정별 펌프 상태 변수 측정을 통한 자기 진단 기술 개발(e-Diagnostics Level 2 FDC 수준), 그리고 (4)측정/통신 PMS (Pump Monitoring System) 개발(통신속도 56k bps 이상, e-Diagnostics Level 0~1)을 최종 목표로 추진되어 왔다. 첫 번째 주요실적은 진공배기시스템의 다중 상태변수 측정 및 평가 장치를 성공적으로 개발하였다. 본 장치는 현장에서 진공펌프의 배기속도를 3% 이내로 정밀하게 측정할 수 있는 소닉 노즐을 이용한 배기속도 측정 장치 및 기술을 성공적으로 개발 완료하였다. 그리고 측정 가능한 상태변수는 20종에 달하며 이들을 이용하여 진공펌프의 성능인자 15종과 특성치 9종을 종합적으로 평가할 수 있는 능력을 갖추었다. 두 번째 주요실적은 공정별 진공배기시스템의 자기진단 및 예지보수 기수 개발이다. 연구에서 개발된 적응형 인자모델을 이용한 상태진단 기술은 이미 학회 논문으로 소개되었으며 본 기법은 기존의 시계열 상태변수를 이용한 기존의 상태진단 기법보다 메모리 소요량을 100배로 줄였으며 그리고 연산양은 10% 이하로 줄인 획기적인 기법이라 할 수 있다. 세 번째 주요실적은 상태변수 측정, 통신, 제어 및 공정적응 기능 통합형(smart) PMS(pumper monitoring system) 개발이다. 본 장치는 CAN통신 기법을 새로이 채택하였으며 한 대의 PC로 64대의 단위 진공펌프들의 운전 상태변수를 실시간으로 수집할 수 있도록 하였다. 그리고 운전 중인 개별 진공펌프들의 운전 상태진단은 적응형 인자모델을 이용한 상태진단 기술을 응적용함으로써 매우 정확한 상태진단을 매 batch마다 수행할 수 있는 기능을 제공한다.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.265-272
• /
• 1999

A simultaneous profile analysis of 19 environmental estrogens, which act like estrogen and may effect the endocrine system by binding to hormone receptors or influencing cell signaling pathways, was attempted. The present method was based on the selected ion monitoring (SIM) mode of gas chromatography/mass spectrometry (GC/MS). It involves solid-liquid extraction, enzyme hydrolysis, liquid-liquid extraction and quantitative conversion into trimethylsilyl (TMS)-ether derivatives. Analytical recovery range was 47.6 ~ 99.5% and the RSD values of within-a-day and day-to-day test were 0.66 ~ 9.33%, 1.66 ~ 16.14%, respectively. The Korean reference values for the evaluation of environmental estrogen effects were established by this method.

• Journal of Powder Materials
• /
• v.24 no.5
• /
• pp.370-376
• /
• 2017

In this study we manufacture a Ni-Cr-B-Si +WC/12Co composite coating layer on a Cu base material using a laser cladding (LC) process, and investigate the microstructural and mechanical properties of the LC coating and Ni electroplating layers (reference material). The initial powder used for the LC coating layer is a powder feedstock with an average particle size of $125{\mu}m$. To identify the microstructural and mechanical properties, OM, SEM, XRD, room and high temperature hardness, and wear tests are implemented. Microstructural observation of the initial powder and LC coating layer confirm the layer is composed mainly of ${\gamma}-Ni$ phases and WC and $Cr_{23}C_6$ carbides. The measured hardness of the LC coating and Ni electroplating layers are 653 and 154 Hv, respectively. The hardness measurement from room up to high temperatures of $700^{\circ}C$ result in a hardness decrease as the temperature increases, but the hardness of the LC coating layer is higher for all temperature conditions. Room temperature wear results show that the wear loss of the LC coating layer is 1/12 of the wear level of the Ni electroplating layer. The measured bond strength is also greater in the LC coating than the Ni electroplating.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.2
• /
• pp.163-171
• /
• 2014

Objectives : This study aims to improve health and the quality of life of teenagers by identifying an association between the periodontal status and oral health behaviors of Korean teenagers using 2010 Korean National Oral Health Survey data. Methods : Subjects were teenagers aged from 12 to 15 in Korean National Oral Health Survey (KNOHS). The questionnaire consisted of periodontal status, general characteristics, periodontal related factors, and oral health related behaviors. Results : Gingival bleeding was found in 56.9% of teenagers because unhealthy periodontal status and tartars were found. Those who were 15 years old had unhealthier periodontal status than those who aged 12 years old. Those who lived in rural areas tended to have worse periodontal status than those who lived in the big cities. Access to dental floss, mouth rinsing solution and regular dental checkup tended to make the healthier periodontal status. Smokers had the worse periodontal status than the nonsmokers. Conclusions : The oral health care in the teenagers aged from 12 to 15 is very important because the permanent dentition is completed in this stage. It is necessary to lay emphasis on the oral health improvement and dental caries prevention program to the teenagers.

• Archives of design research
• /
• v.16 no.1
• /
• pp.281-288
• /
• 2003

Beyond the millennium industrial development affects all of our life, and the growth of the automobile among them provides us with convenience of the living. One, however, was regarded as important to recognize the safety of the parking rather today than any past, getting together with the increasing auto population into the popularization gradually. It was needed to develope an active system and safety equipment in order to protect against an accident because there were so many accidents during the parking about which one felt relief. The objectives of this study was to develop a supporting structure with high static friction, adapt to various road environments, such as an unpaved road, a wet paved road, controling an angle, considering a portable and moveable device in order to prevent an accident during parking. As it mentioned above, the novel supporting structure had four strengths rather than a previous supporting structure, a practical new design (1998 084336 B60C) The implication of the study was the inspiration from warning of the parking accident almost 10 % of the total traffic accident in Korea, tries to find a solution to a problem in order to decrease the parking accident, in addition, makes it regulation ,and it was implied to the orientation about the popularization and the practical use of the new supporting structure which was developed

• Journal of Elementary Mathematics Education in Korea
• /
• v.18 no.1
• /
• pp.37-62
• /
• 2014

In this thesis, we inquire into teaching method of decimal fraction concept in elementary mathematics education based on measurement activity. For this purpose, our research tasks are as follows: First, we design a experimental learning-teaching plan of 'decimal fraction' unit in 4th grade textbook and verify its effect. Second, after teaching experiment using experimental learning-teaching plan, we analyze the student's status of understanding about decimal fraction concept. As stated above, we have performed teaching experiment which is ruled by new lesson design and analysed the effects of teaching experiment. Through this study, we obtained the following results. First, introduction of decimal fraction based on measurement activity promotes student's understanding of measuring number and decimal notation. Second, operator concept of decimal fraction is widely used in daily life. Its usage is suitable for elementary mathematics education within the decimal notation system. Third, a teaching method of times concepts using place value expansion of decimal fraction is more meaningful and has less possibility of misunderstanding than mechanical shift of decimal point. Fourth, teaching decimal fraction through the decimal expansion helps students with understanding of digit 0 contained in decimal fraction, comparing of size and place value. Fifth, students have difficulties in understanding conversion process of decimal fraction into decimal notation system using measurement activity. It can be done easily when fraction is used. However, that is breach to curriculum. It is necessary to succeed research for this.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5116-5123
• /
• 2014

This study examined the awareness levels of stroke warning symptoms and the related factors among residents in a province and this paper presents the evidence for education and promotion strategies. The study subjects were 585 adults living in a province. The demographic factors and awareness levels of stroke symptoms were surveyed through a telephone interview. In the survey, the most frequently recognized warning symptoms were 'sudden speech disturbance (84.6%)', and 'sudden weakness of one side (73.9%)'. On the other hand, 'sudden dizziness (67.0%)', 'sudden visual impairment (55.4%)' and 'sudden severe headache (51.3%)' were less recognized. In a multiple regression analysis, male, young age, no familial history of stroke, no acquaintance history of stroke, low educational level, no exposure to promotional literature were significantly related to a low awareness level of the stroke warning symptoms. Providing customized programs will be helpful for enhancing the efficiency of promotion and education to the population with a low awareness level of stroke symptoms.