• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.14-19
• /
• 2013

Nonlinearity parameter is an inherent property of materials measuring fundamental acoustic amplitude($A_1$) and second harmonic amplitude($A_2$). However, measurement of $A_1$ and $A_2$ has complex calibration procedure, many researchers prefer to measure relative nonlinearity parameter rather than absolute nonlinearity parameter. But, relative nonlinearity parameter is only detect materials degradation with various degradation samples, it is limited application in determining third order elastic constants of materials. Therefore, in this study, the piezoelectric detection method is adopted to measure absolute nonlinearity parameter due to experimental simplicity compare to capacitive detector. Linearity of measurement system is verified by $A_1^2vsA_2$ plot, and we measured ultrasonic nonlinearity parameters of fused silica and Al2024-T4.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2005

Electric double layer capacitors(EDLCS) based on the charge stored at the interface between a hi팀 surface area carbon electrode and an organic electrolyte solution are widely used as a maintenance-free power source for IC memories and microcomputers. The achievement of the excellent performance of the capacitor requires an electrolyte solution which provides high conductivities over a wide temperature range and good electrochemical stabilities to allow the capacitor to be operated at high voltage. The electrochemical capacitor using a carbon material as electrodes and using an organic electrolyte with $1M-LiPF_6$ in PC-GBL-DEC(volume ratio 1:1:2) has specific capacitance of 64F/g.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1211-1218
• /
• 2008

This study is for design of the detention system distributed in a watershed by the Multi-Objective Genetic Algorithms(MOGAs). A new model is developed to determine optimal size and location of detention. The developed model has two primary interfaced components such as a rainfall runoff model to simulate water surface elevation(or flowrate) and MOGAs to get the optimal solution. The objective functions used in this model depend on the peak flow and storage of detention. With various constraints such as structural limitations, capacities of storage and operational targets. The developed model is applied at Gwanyang basin within Anyang watershed. The simulation results show the maximum outlet reduction is occurred at detention facilities located in upper reach of watershed in the peak discharge rates. It is also reviewed the simultaneous construction of an off-line detention and an on-line detention. The methodologies obtained from this study will be used to control the flood discharges and to reduce flood damage in urbanized watershed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.8
• /
• pp.40-47
• /
• 2010

In this paper, we propose a probability method to determine minimum capacity of energy storage system(ESS) for Micro Grid(MG). Because of high capital cost of ESS, it's very important to determine optimal capacity of ESS and for stable operation of MG and we should determine minimum capacity of ESS. The proposed method has abilities to consider forced outage rate of generators and intermittent of non-dispatchable generators and minimum capacity make MG keep energy balancing by oneself.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2340-2352
• /
• 1994

Under the current IN(Intelligent Network) Architecture, most of their function were performed in SSP(Service Switching point), so the provision or modification of service was limited. To over come these limitation, the structure of 'AIN(Advanced Intelligent Network)' emerged. In this paper, SSP for AIN structure is designed and its performance is evaluated. In other words, the requirements for AIN service implementation are specified on the basis of ITU-T Recommendations. From these requirments and TDX-10 Exchange architecture, the SSP for AIN structure is designed, and its performance is analyzed through the method of simulation and analytical modeling. As a conclusion of this paper, when the system is operated as a standard model, the maximum throughput is 1,270,000 BHCA for Free Phone Service and 1,190,000 BHCA for Credit Call Service. The processors in INS(Interconnection Network Subsystem) are proved to be bottleneck elements. To enhance the performance, several suggestions such as processor and link speedup, and other D_bus service policy are proposed.

• Spatial Information Research
• /
• v.19 no.1
• /
• pp.93-105
• /
• 2011

In recent years, large and complex three-dimensional building has been constructed by the development of building technology and advanced IT skills, and people have lived there and spent a considerable time so far. Accordingly. in this sophisticatcd three-dimensional space, emergencies services or convenient information services have been in demand. In order to provide these services efficiently, understanding of topological relationships among the complex space should be supported naturally. Not on1y each method of understanding the topological relationships but also its efficiency can be different depending on different topological data models. B-rep based data model is the most widely used for storaging and representing of topological relationships. And from early 2000s, many researches on a network based topological data model have been conducted. The purpose of this study is to verify the efficiency of performance on spatial queries. As a result, Network-based topological data model is more efficient than B-rep based data model for determining the spatial relationship.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.2
• /
• pp.71-82
• /
• 1984

A programme, called BIPOLE, for the numerical analysis of twotimensional n-p-n bipolar transistors was developed. It has included the SRH and Auger recolnbination processes, the mobility dependence on the impurity density and the electric field, and the band-gap narrowing effect. The finite difference equations of the fundamental semiconductor equations are formulated using Newton's method for Poisson's equation and the divergence theorem for the hole and electron continuity equations without physical restrictions. The matrix of the linearized equations is sparse, symmetric M-matrix. For the solution of the linearized equations ICCG method and Gummel's algorithm have been employed. The programme BIPOLE has been applied to various kinds of the steady-state problems of n-p-n transistors. For the examples of applications the variations of common emitter current gain, emitter and diffusion capacitances, and input and output characteristics are calculated. Three-dimensional representations of some D.C. physical quantities such as potential and charge carrier distributions were displayed. This programme will be used for the nome,rical analysis of the distortion phenom ana of two-dimensional n-p-n transistors. The BIPOLE programme is available for everyone.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.438-438
• /
• 2012

우리나라의 용수사용의 48%를 차지하고 있는 농업용수는 저수지와 양수장 보 등을 이용하여 농경지에 용수를 공급하고 있다. 이 중 농업용저수지는 18,000 여개에 이르고 있으며, 전국에 산재되어 하천의 중 상류부에서 농경지에 용수를 공급하는 역할을 수행하고 있다. 유역의 중상류부에 위치한 농업용저수지의 용량을 증대시키는 사업인 "농업용저수지 둑높이기사업"은 이 치수측면에서 농업지역 관개용수의 공급과 함께 하천유지용수의 공급이고, 더불어 재해측면에서 취약한 농업용저수지 보강을 목적으로 하고 있다. 둑높이기사업 이전의 저수지운영은 못자리용수가 들어가는 시기인 4월 중순부터 5월 중순경의 모내기 기간 동안에 가장 공급량이 많게 하면서 관개용수의 원활한 공급을 위한 운영을 해 왔으나, 둑높임저수지의 경우는 영농기간이 종료되는 시기인 9월 중하순을 기준으로 하천유지용수 공급을 위한 저수지 운영이 필요하게 되었다. 농업용저수지는 관개기 시점의 저수량이 이수안전을 위한 중요한 요인이며 하천유지용수의 공급을 감안할 경우 관개기 종료 시점의 저수량 도 중요한 의사결정 요인이 된다. 이 에 본 연구에서는 용수목적별 공급을 위한 둑높임저수지 운영곡선을 계획하는데 있다. 운영곡선의 기본적인 의사결정기준은 영농시점인 4월의 저수지 수위와 영농 종료시점인 10월의 수위이다. 둑높임저수지의 운영은 영농이 종료되는 시점인 10월을 기준으로 저수용량을 최대한 확보해야 하며, 다음연도 관개시작일인 4월을 기준으로 농업용수 수위가 확보 될 수 있도록 저수위조절이 필요하다. 따라서 본 연구에서는 저수지 관리자가 상기와 같은 조건을 만족하면서 해당 저수지를 운영하도록 하기 위해 비관개기동안에 하천유지용수를 최대한 공급하면서도 다음 4월에 농업용수 필요수량을 충족할 수 있는 수위를 가질 수 있도록 운영곡선 가이드라인을 수립하였다. 본 연구를 통해 작성된 운영곡선을 프로그램화하여 모의조작 할수 있는 기반을 만든다면 농업용수의 원활한 공급을 바탕으로 하류하천의 하천유지용수 공급을 갈수기에 최대한 공급할 수 있으며 향후 예상되는 기상조건에 따른 주단위, 월단위의 용수공급계획수립이 가능할 것으로 기대된다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.9
• /
• pp.889-897
• /
• 2010

Recently, a cutting-edge large-scale image database system has demanded these attributes: search with alarming speed, performs with high accuracy, archives efficiently and much more. An image identifier (descriptor) is for measuring the similarity of two images which plays an important role in this system. The extraction method of an image identifier can be roughly classified into two methods: a local and global method. In this paper, the proposed image identifier, LFH(Local Feature's Histogram), is obtained by a histogram of robust and distinctive local descriptors (features) constrained by a district sub-division of a local region. Furthermore, LFH has not only the properties of a local and global descriptor, but also can perform calculations at a magnificent clip to determine distance with pinpoint accuracy. Additionally, we suggested a way to extract LFH via GPU (OpenGL and GLSL). In this experiment, we have compared the LFH with SIFT (local method) and EHD (global method) via storage capacity, extraction and retrieval time along with accuracy.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.507-511
• /
• 2019

The use of regenerative energy in AC drive systems has been an issue since the system became an industry standard in the 1990s. According to the quantity of the regenerative energy, the braking resistor in the case of low capacity was common. However the use of such low amount of energy is actively discussed, and the method of mounting the regenerative converter is becoming popular. In this paper, an isolated regenerative converter for reducing the circulating current which is mentioned as the biggest disadvantage of the conventional power regenerative converter system is proposed. In order to save energy, employing a power regenerative converter system for utilizing regenerative energy in an AC drive system is common. However due to the structure of the system, a circulating current is generated, which inevitably causes a decrease in efficiency. In this paper, an isolated regenerative power converter system is proposed to solve the circulating current and computer simulation to verify the possibility. The simulation results show that 20% of the circulating current of the conventional system does not appear in the proposed system, and the validity of the proposed system is confirmed.