• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.14-19
• /
• 2024

To determine the performance of recycled cells for application to residential BESS, cells used over the past 5 years were selected. The basic specifications of the cell used in the test are nominal voltage of 3.7[V], nominal capacity of 2,200[mAh], charging voltage of 4.05[V], continuous discharge current of 1[C](2,200[mA]), continuous charging current of 0.5[C](1,100[mA]). For new cells, the internal resistance was 21.3±1[mΩ], but for recycled cells, the average internal resistance was 25.38[mΩ], an increase of about 19.1[%]. The charge·discharge capacity was approximately 18.9~19.3[%] lower than that of a new cell. Because internal resistance and charge·discharge capacity are closely related to cell aging, cells to be applied to BESS need to use products with an initial internal resistance of 1.5 times or less and a charge·discharge capacity performance of 70[%] or more.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.411-414
• /
• 2000

음의 비선형 전파가 일어나기 쉬운 정도를 나타내는 파라메타로서 기본파 진폭과 제2고조파 진폭의 비로써 매질의 물리적 성질에만 관계하는 파라메타 B/A가 있다(1)(2). 종래 B/A파라메타 측정은 대부분 광대역의 초음파 트랜스듀서 혹은 공진 주파수가 다른 복수의 트랜스듀서를 이용하여 왔다(3). 본 연구에서는 협대역의 단일 트랜스듀서를 이용하여 B/A파라메타를 효율적으로 측정 할 수 있는 전용 초음파 트랜스듀서를 제안하였다. 그 방법으로 특성이 동일한 두 장의 압전체를 적층시키고, 그 중 한 장의 압전체에 전기적인 용량을 접속하여 기본 공진 모드 및 기본 공진 모드의 두 배의 주파수에 해당되는 조화파 모드를 발생시킬 수 있도록 하였다 이것을 시험 제작하여 그 특성을 이론 및 실험적으로 해석한 결과 음향 매질의 비선형 파라메타인 B/A의 측정에 적용 가능함을 확인하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.121-127
• /
• 2016

We propose a algorithm to calculate power factor of fundamental waveform in an environment where the voltage and current have been distorted by harmonics. In the proposed power factor computation algorithm, voltage and current are converted to rotating DQ reference frame, and power factor is calculated from active power and reactive power. We compare the proposed method with the conventional power factor measurement method as mathematically. In a condition that voltage and current are distorted by harmonics, the proposed method accurately measure the power factor of fundamental wave, and it is confirmed by simulation using MATLAB. If the proposed power factor measurement method is applied to an automatic power factor control system, a power factor compensation performance can be maximized in harmonic distortion environment. As a result, it is possible to reduce electricity prices, reduce line loss, increase load capacity, ensure the transmission margin capacity, and reduce the amount of power generation.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.167-174
• /
• 2016

Runway and taxiway is base facilities for aircraft take off and landing and runway capacity is one of major factor for airport capacity. Runway occupancy time is affect on the runway capacity. The identification of aircraft using taxiway by analysis of airport ground surveillance data and the measurement of pass time on the points is general method for the confirmation of the runway occupancy time. This study is runway occupancy time analysis of landing airplane using ADS-B message, in this study we surveyed landing aircraft runway occupancy time and analysis of serviced record using taxiway include rapid exit taxiway. The result of analysis is to confirm the different of landing direction and aircraft category on the same runway caused by structure of airport. Also the result of runway occupancy time analyzed data, it is base input data for the air transportation simulation.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.72-83
• /
• 2002

Required power and solar array sizing of KOMPSAT-2 have been analyzed by ASTRIUM and KARI in November, 2000. There are Electrical Power Subsystem(EPS) design discrepancies between ASTRIUM and Korea Aerospace Research Institute(KARI) according to heritage program, EPS operation concepts, power source and the characteristic of the electrical boxes. To design the power system of KOMPSAT-2, ASTRIUM has used the EPS design of the CHAMP and GlobalStar program. But SSTI, TOMS-EP and KOMPSAT-1's design concepts has been used for KOMPSAT-2 EPS design by the KARI. To get the design conclusion, there are many trade-off meetings for the EPS sizing using each sides' heritage program and EPS operation concept. And the EPS design factors and approaching methods have been reviewed and discussed. In addition the EPS design results from ASTRIUM and KARI are summarized in this paper.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.272-274
• /
• 2004

양방향입찰시장(TWBP)의 도입을 위해서는 이를 위한 시장설계 및 효율적인 시장운영을 위한 다양한 분석 작업들이 요구되고 있다. 특히 시장설계의 경우, 해외 자문회사와의 협력을 통해 경쟁적 전력시장을 이미 도입하여 운영하고 있는 해외 국가들의 사례들을 포함한 많은 시장운영 기법들이 검토되고 있으며 향후 도입될 TWBP 전력시장에 적합한 방안들을 준비하고 있다. 전력을 전력시장운영규칙이 정하는 바에 따라 전력시장을 통해서만 거래하도록 규정하고 있는 우리나라의 경우, 전력시장운영규칙은 전력시장과 전력계통의 운영에 대한 모든 것을 다루게 되는 만큼 이에 대한 합리적인 설계와 적용은 효율적인 TWBP 전력시장의 기본 틀이라고 할 수 있다. 양방향입찰시장에서의 가격결정은 전력수급과 시장가격 안정화를 위해 매우 중요한 사안이다. 또한 현재 CBP시장과 다른 용량요금(CP)제도의 폐지와 기타 공급예비력확보 제도 등 도매시장설계에 있어 중요한 자료를 제공한다. 양방향입찰시장하에서 가격수준 분석을 통해 시장개설 이전에 문제점을 사전에 검토하여 문제점을 개선하고 시장규칙에 반영하여야 한다. 또한 용량요금 폐지에 따른 보완대책을 수립하여 수급불안정을 방지하고 전력시장 안정화와 성공적인 도매경쟁시장 개설을 위해 필수적이라 할 수 있다. 본 논문에서는 CBP 시장과 TWBP 시장에서의 기본적 가격예측을 위한 구조적 모델링과 일부 시나리오에 대한 결과를 소개하고자 한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.67-75
• /
• 2020

In this paper, by applying LCP substrate, the capacitor and inductor are implemented with a variety of value that can be used in 35 GHz circuits. Depending on how to apply it to the circuit, it is required high value by designing the basic structures such as electrode capacitor and spiral inductor. However they are not available in high-frequency domain, because their SRF(Self-Resonant Frequency) is lower than the frequency of 35-GHz. By finding the limit, this paper devised classifying passive devices for the DC and the high-frequency domain. The basic structure is suitable for DC and microstrip λ/8 length stub structure can be used for high-frequency. The open and short stub structure operate as a capacitor and inductor respectively in the frequency of 35 GHz. If their impedance is known, it is possible to extract the value through the impedance-related equation. By producing with the permittivity 2.9 LCP substrate, the basic structure which are available in the DC constituted a library of capacitance of 1.12 to 13.9 pF and inductance of 0.96 to 4.69 nH, measured respectively. The stub structure available in the high-frequency domain were built libraries of capacitance of 0.07 to 2.88 pF and inductance of 0.34 to 1.27 nH, calculated respectively. The measurements have proven how to diversify value, so libraries can be built more variously. It is possible to integrate with the operation circuit of TRM(Transmit-Receive Module) for the frequency 35-GHz, it will be an alternative to the passive devices that can be properly utilized in the circuit.

• Journal of Korean Society of Transportation
• /
• v.31 no.6
• /
• pp.3-11
• /
• 2013

Under the consumption of bad weather situation affects traffic flows, the study scope is focused on highway capacity and speed variations among other highway traffic flow characteristic changes according to snowfall density. Thus, this study carried out through the data collection and statistical analysis by focusing on capacity and speed changes. Traffic volume, speed and density were selected as factors to explain the property change of a traffic flow for analysis, and 7 basic sections such as 3 highways in Gyeonggi-do and 4 highways near the meteorological observatory were selected as survey points for data collection. Snowfall levels were classified into 3 steps(Light, Medium, Heavy Snow) to analyze the capacity change by snowfall levels. As a result of analysis, the change of capacity depending on snowfall levels decreased 13.2% in case of light snow compared to a good weather, 18.6% in case of medium snow and 32.0% in case of heavy snow, so the capacity reduction rate increased as the snowfall level increased. The worsening weather appeared to have a very big possibility to act as a factor to reduce the operational efficiency of a road, so a road design and operation method considering this should be presented in the future.

• Journal of Environmental Impact Assessment
• /
• v.25 no.2
• /
• pp.141-154
• /
• 2016

This study was conducted laying the focus on finding the mutual action between the substantial ecological value and economic system in the national land, and calculating the environmental carrying capacity and sustainability of the national land using the emergy synthesis. Particularly, this study pays attention watchfully to the reality that the analytic framework to analyze sustainability is not arranged well, as the concept of sustainable development considering environmental carrying capacity, which becomes a widely discussed topic today, is defined differently according to the subjective views of respective researchers, and the situation which needs in-depth evaluation on the interaction between nature and economy which becomes the fundamental of sustainable development. This study also aims at groping for correct direction for the national land development by calculating the environmental carrying capacity and index value which is appropriate to the national land and providing the framework for preparing the policy to induce the sustainable use and management of the national land. The concept of emergy synthesis which is used for the evaluation of environmental carrying capacity and sustainability in the national land, as in this case, can notify the information on current situation of the national land as well as explain how the national land transforms according to time pass (the role of information synthesis), and gives knowledge if the national land policies advances toward the direction of sustainable development (the role of policy evaluation and observation). Emergy synthesis also can take role for selecting best policy on the process of decision making on the exploitation of the national land (the role on the process of decision making).

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.354-362
• /
• 2011

One of the unsolved problems in Artificial Neural Networks is related to the capacity of a neural network. This paper presents a CoreNet which has a multi-leveled input and a multi-leveled output as a 2-layered artificial neural network. I have suggested an equation for calculating the capacity of the CoreNet, which has a p-leveled input and a q-leveled output, as $a_{p,q}=\frac{1}{2}p(p-1)q^2-\frac{1}{2}(p-2)(3p-1)q+(p-1)(p-2)$. With an odd value of p and an even value of q, (p-1)(p-2)(q-2)/2 needs to be subtracted further from the above equation. The simulation model 1(3)-1(6) has 3 levels of an input and 6 levels of an output with no hidden layer. The simulation result of this model gives, out of 216 possible functions, 80 convergences for the number of implementable function using the cot(x) input leveling method. I have also shown that, from the simulation result, the two diverged functions become implementable by precalculating the weight values. The simulation result and the precalculation of the weight values give the same result as the above equation in the total number of implementable functions.