• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.955-961
• /
• 2021

In modern warfare, the importance of electronic warfare, which carries out a mission that using radio wave to find out enemy information or to protect ally information, has increased. Radar jamming technique is one of the most representative techniques of EA(Electronic Attack), it disturbs and deceives enemy radar system in order to secure ally location information. Velocity deception jamming technique, which is one of the radar jamming techniques, generally operate against pulse-doppler radar which use doppler effect in order to track target's velocity and location. Velocity Deception Jamming Technique can be implemented using DRFM(Digital Radio Frequency Memory) that performs Frequency Modulation. In this paper, I describe implementation method of VGPO/VGPI(Velocity Gate Pull-Off/Pull-In) velocity deception jamming technique using phase-sampled DRFM, and verify the operation of VGPO/VGPI velocity deception jamming technique with board test under signal injection condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2B
• /
• pp.160-169
• /
• 2002

While radar operator recognizes and tracks threat targets through the scope, it is essential to overcome the jamming signal that disturbs the normal operation of the radar. Therefore, to train operator and test the EW capability of the radar, this paper proposed the jamming signal simulation algorithm and design results to generate the deception jamming(range, velocity, angle deception and multiple false targets) and noise jamming signals(spot, barrage, swept spot and cover pulse noise). And also, the radar jamming signal simulator composed of the 6 constituents is developed on basis of the proposed algorithm and digital circuit design technique and confirmed the validity of the developed simulator by means of the test results to generate the various jamming signal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.269-278
• /
• 2017

We analyze the jamming/deception performance of an active decoy against ground tracking radars on dynamic combat scenarios. Based on the movement and the interference flow of an airborne platform, the trajectories of the active decoy is accurately calculated by solving 6-degree of freedom equations of motion. On realistic combat scenarios, numerical simulations are examined to analyze the jamming performance of the decoy for various movements of the platform and RF specifications of the active decoy. Effective jamming/deception area against the ground tracking radars is estimated from the simulation.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.29-35
• /
• 2013

In this paper, we investigate the type and detection methode of spoofing attack, and then analyze the performance of spoofing detection algorithm in GPS L1 signal through the simulation. Generally spoofer is different from the jammer, because the receiver can be operated and not. In case of spoofing the GPS receiver is hard to recognize the spoofing attack and can be operated normally without stopping because the spoofing signal is the mimic GPS signal. To evaluate the performance of spoofing detection algorithm, both the software based spoofing and GPS signal generator and the software based GPS receiver are implemented. In paper, we can check that spoofing signal can affect to the DLL and PLL tracking loop because code delay and doppler frequency of spoofing. The spoofing detection algorithm has been implemented using the pseudorange, signal strength and navigation solution of GPS receiver and proposed algorithm can effectively detect the spoofing signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.611-621
• /
• 2010

When an enemy platforms transmit electronic jamming or tracking interference signal to a friendly ship's radar, the radar have to avoid the jamming and to track targets continually without losing the targets with the electronic protection techniques. Electronic protection is an essential key for a platform to survive in electronic warfare, for this purpose, jamming simulator was developed to provide electronic warfare environments for the test and evaluate the effectiveness of radar's electronic protection techniques. Jamming simulator has ability to generate a variety of deception and noise jamming signals using the DRFM which minimize phase distortions of 1GHz broadband radar signal with the phase sampling method. This paper presents the design contents of the jamming simulator to process the analysis of broadband radar signal and generate jamming signal, also proposes the algorithms of the deception and noise jamming and verifies the effectiveness of the simulator by field trial.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.5
• /
• pp.47-55
• /
• 2019

As the damage caused by GPS jamming has been increased, researches for detecting and preventing GPS jamming is being actively studied. This paper deals with a GPS jamming detection method using multiple GPS receiving channels and three-types machine learning techniques. Proposed multiple GPS channels consist of commercial GPS receiver with no anti-jamming function, receiver with just anti-noise jamming function and receiver with anti-noise and anti-spoofing jamming function. This system enables user to identify the characteristics of the jamming signals by comparing the coordinates received at each receiver. In this paper, The five types of jamming signals with different signal characteristics were entered to the system and three kinds of machine learning methods(AB: Adaptive Boosting, SVM: Support Vector Machine, DT: Decision Tree) were applied to perform jamming detection test. The results showed that the DT technique has the best performance with a detection rate of 96.9% when the single machine learning technique was applied. And it is confirmed that DT technique is more effective for GPS jamming detection than the binary classifier techniques because it has low ambiguity and simple hardware. It was also confirmed that SVM could be used only if additional solutions to ambiguity problem are applied.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.3
• /
• pp.239-250
• /
• 2022

In this paper, we analyze the performance of an FM radio based passive radar in the presence of deception jamming such as false-target generation. To do this, we examine the effects of applying the deception jamming signal to the passive radar through the derivation of the construction of the amplitude-range-Doppler(ARD) plot. The analysis results show that applying the deception jamming signal with the low power similar to the target echo signal generates false targets at positions set by the jamming variables compared to the real target position in the ARD plot. Also, it is possible to induce the jamming effect so that only false targets are detected by selecting appropriate jamming power. Simulations are included to verify the theoretical results and to discuss on the effectiveness of the deception jamming on the FM radio based passive radar.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.1
• /
• pp.37-45
• /
• 2015

These days many systems use the gps signal to get their own position. Because it's cheap and accurate and convenient. But, the strength of gps signal is very weak and can be easily interrupted by GPS jamming and GPS spoofing. Normally, fighter can use DME, TACAN, etc to correct their position error when GPS is not working. But, many aircraft which does not have those kinds of hardware need to pay additional cost to get it. In this paper, we propose how to overcome GPS jamming and GPS spoofing by only using data link system. The main purpose of this paper is to make the data link protocol to get an exact position information of own unit at gps error environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.221-228
• /
• 2020

This paper presents the radar counter jamming algorithm and ground far-field test results for the pull-off deceptive jamming signals like RGPO(Range Gate Pull Off) and VGPO(Velocity Gate Pull Off). We designed the radar counter jamming algorithm according to the characteristics of the deceptive jamming signals. This algorithm is validated by simulation before ground far-field test. The existing X-band AESA radar demonstrator was used to test the proposed algorithm. The proposed algorithm was applied to the radar processor software. The deceptive jamming signals generated using the commercial jamming signal generator. We performed the repeated ground far-field test with the test scenario. Test results show that the proposed counter deceptive jamming algorithm works in the real radar system.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.3
• /
• pp.97-106
• /
• 2015

In this paper, the development of infrared threat surrogate system is described and it can be used to verify the performance of DIRCM system. In this research, threat surrogates are manufactured using same F# and reflective optics used in 1st- and 2nd-Gen. real seeker so that the threat surrogate system can be used to develop code-based jamming techniques. Also the threat surrogate system can analyze the saturation jamming effect for image seeker using FPA detector. The result shows that 1st- and 2nd-generation threat surrogates have relatively precise tracking performance and jamming effect.