• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.19-33
• /
• 2008

Dynamic response measurements from natural excitation were carried out for 25- and 42-story buildings to evaluate their inherent properties, such as natural frequencies, mode shapes and damping ratios. Both are reinforced concrete buildings adopting a core wall, or with shear walls as the major lateral force resisting system, but frames are added in the plan or elevation. In particular, shear walls in a 25-story building are converted to frames from the 4th floor level downwards while maintaining a core wall throughout, resulting in a fairly complex structure. Due to this, along with similar stiffness characteristics in the principal directions, significantly coupled and closely spaced modes of motion are expected in this building, making identification rather difficult. By using various state-of-the-art system identification methods, the modal parameters are extracted, and the results are then compared. Three frequency-domain and four time-domain based operational modal identification methods are considered. Overall, all natural frequencies and damping ratios estimated from the different identification methods showed a greater consistency for both buildings, while mode shapes exhibited some degree of discrepancy, varying from method to method. On the other hand, in comparison with analysis results obtained using the initial finite element(FE) models, test results exhibited a significant difference of about doubled frequencies, at least for the three lower modes in both buildings. To improve the correlation between test and analysis, a few manual schemes of FE model updating based on plausible reasons have been applied, and acceptable results are obtained. The advantages and disadvantages of each identification method used are addressed, and some difficulties that might arise from the updating of FE models, including automatic procedures, for such large structures are carefully discussed.

• Korean journal of applied entomology
• /
• v.17 no.2 s.35
• /
• pp.89-98
• /
• 1978

A study on the root-knot nematodes (Meloidogyne spp.) affecting economic crops in Korea was undertaken to know the distribution of the nemic fauna. Total 66 samples were taken from soil and root of 24 host plants at different localities in 4 provinces. Four Meloidogyne species such as Meloidogyne hapla, Meloidogyne arenaria, Meloidogyne incognita and Meloidogyne javanica were identified and some morphological characteristics were described. One of these, Meloidogyne javanica was reported newly in Korea from Horticultural Experimental Station, Suweon, Gyeong Gi on potato, Geomsadong, Daegu on chinese cabbage, Sangeogdong, Daegu, Gyeong Bug on violet and Choeumri, Namhae, Gyeong Nam on pumpkin. In Jae Ju province, Meloidogyne incognita was only found except the other three species. The most common and widely distributed Meloidogyne species in Korea is Meloidogyne hapla by $50\%$ in total, next Meloidogyne incognita $33.3\%$ Meloidogyne arenaria $10.6\%$ Meloidogyne javanica $6.0\%$ in turn, The root-knot nematodes infected the most severely in Jae Ju province and Gyeong Nam, Gyeong Bug and Gyeong Gi province in turn. Twenty four plants were attacked by root-knot nematodes among them important economic crops are soybean, peanut, potato, tomato, cucumber, carrot, pumpkin, wateremelon, edible burdock, pepper, eggplant, cabbage, lettuce and tobacco in Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.42-49
• /
• 2020

In patients with fully edentulous jaw, treatment of complete dentures should be carried out in many stages when following the conventional methods. Therefore there were disadvantages such as multiple visits to dental clinic is inevitable. In addition, errors caused by polymerization shrinkage, which happens during the fabrication of denture, and difficulties in reproduction of damaged or lost denture were considered as disadvantages. But nowadays, computer-aided design and computer-aided manufacturing (CAD/CAM) system is widely used in dentistry and it has begun to expand its spectrum in manufacturing complete dentures. Using CAD/CAM system to fabricate complete dentures can reduce the number of patient's visit and clinical chair time, since taking impression, recording jaw relation, and selection of artificial teeth are performed at the same time during the first visit, and delivering of dentures during the second visit is possible. In addition, because 3D-Printing technology is used, errors by polymerization shrinkage can be reduced. Among the companies that fabricate complete dentures using CAD/CAM system, DENTCA CAD/CAM denture (DENTCA Inc., Los Angeles, CA, USA) is the most commercialized company. In this case, we treated patients of complete dentures using conventional complete denture method and DENTCA CAD/CAM denture system in the same patient. We would like to report this case because we have achieved good results not only in functional aspects of pronunciation, chewing, and swallowing but also in aesthetic aspects.

• Ocean and Polar Research
• /
• v.41 no.4
• /
• pp.275-288
• /
• 2019

We investigated flux, grain size distribution, Nd-Sr isotope composition, mineral composition, and trace metal composition (REEs and Sc) of inorganic silicate fraction (ISF, mainly Asian dust with an unrestricted amount of volcanic materials) deposited during 600~1000 ka across the Mid-Pleistocene Transition at core NPGP 1401-2A (32°01'N, 178°59'E, 5205m) taken from the central part of the North Pacific. Our results reveal about a 2-fold increase in ISF flux after 800 ka, which is associated with an increase in La/Sc and a decrease in mean grain size. Asian dusts are finer than volcanic materials and La/Sc increases with the enhanced contribution of Asian dusts. Thus, increased flux after 800 ka can be explained by the increased contribution of Asian dusts relative to volcanic materials, likely due to an intensified Westerly Jet (WJ) and the drying of the Asian continent after the MPT. Mean grain size of ISF varies systematically in relation to glacial-interglacial cycles with a decrease during glacial stages, which is consistent with the previous results in the study area. Such a cyclical pattern is also attributed to the increase in the relative contribution of Asian dusts over volcanic components in glacial stages due to intensified WJ and drying of the Asian continent. Thus, it can be concluded that climate changes that had occurred across the MPT were similar to those of interglacial to glacial transitions at least in terms of the dust budget. Different from the Shatsky Rise, however, compositional changes associated with glacial-interglacial mean grain size fluctuations are not observed in Nd-Sr isotope ratios and trace element composition in our study of the Hess Rise. This may be attributed to the location of the study site far (> 4,000 km) from the volcanic sources. The volcanic component at the study site comprises less than 10% and varies within 3% over glacial-interglacial cycles. Such a small variation was not enough to imprint geochemical signals.

• Investigative Magnetic Resonance Imaging
• /
• v.12 no.2
• /
• pp.188-196
• /
• 2008

Purpose : To describe the clinical, MR imaging, and pathologic findings of pediatric meningiomas. Materials and Methods : The authors retrospectively reviewed the medical records and MR images of 16 pediatric patients with pathologically proven meningioma. Mean patient age at diagnosis was 14 years (range, 3-18). MR images were reviewed for details of lesion sizes, locations, signal intensity (SI), marginal characteristics, internal architectures, enhancements, and dural and parenchymal changes. The findings of other imaging modalities and of pathological examinations were also analyzed. Results : Mean tumor size was 5.24 cm (range, 1.3-18.1 cm) and locations were supratentorial in 12 and infratentorial in 4. SI of masses were variable, that is, high in 9, iso in 4, and low in 3 on T2 weighted images (T2WI), and low (n=11), iso (n=4), or high (n=1) on T1WI images. All lesions were visualized as well-demarcated enhancing masses. Five of the tumors were heterogeneous with cystic or necrotic components. Dural attachment was observed in 11 patients and adjacent brain edema in 10. Tumors exhibited hyperdense (n=6) or isodense (n=4) on non-enhanced CT scans, and 3 of the 7 angiograms demonstrated blood supply from the internal carotid artery. Pathologic examinations revealed the following subtypes; transitional cell (n=4), meningotheliomatous (n=4), chordoid (n=2), fibrous (n=2), clear cell (n=1), hyalinized (n=1), rhabdoid papillary (n=1), and atypical (n=1). Conclusion : Pediatric meningiomas occur usually in teenagers, have diverse pathological types, and may produce atypical imaging findings, such as, a heterogeneous internal content or findings suggestive of intraaxial tumors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.100-115
• /
• 2020

Recently, with the development of various sensors and communication technologies, the market for wearable devices capable of recording physical activity in connection with a smartphone is expanding. The purpose of this study is to analyze physical activity for each transportation modes in order to utilize wearable devices in the field of transportation. This study consists of three steps: data collection, basic statistical analysis, and physical activity analysis. Four adult males and females were recruited as investigators, and physical activity and route information were collected through Fitbit, a commercial wearable device. From the collected physical activity information, a percentage of heart rate reserve (%HRR) using a heart rate was derived and used for analysis. As a results, it was found that there is a statistically significant difference in heart rate for each transportation mode, and physical activity intensity is the highest when walking. In addition, the results of physical activity analysis for the case of using different routes for the same OD were presented. The results presented in this study are expected to be used as basic data for preparing public transportation activation policies and providing customized services for the future.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.72-79
• /
• 2010

The significant of continuous welded rail (CWR) management is growing because KORAIL has the plan to convert the whole of conventional railway lines into CWRs through continuous activities since constructed the CWR track with 1.8km in Gyeongbu line in 1966. The CWR recently is needed a efficient management method because it is difficult to manage the CWR by the poor of technic and equipment, limited maintain labor force and shorted the maintain work time of CWR caused by industrialization, greenhouse effect and global warming In this point, The 70ton Tenser's which is using in the rail site has been analysised with no extra tenser's capacity in case of the under low temperature and exceed the length of 1km as a result of reviewing the CWR-related rules and standards, a series of records of safety accidents, operation obstacles, and the situation of broken rails published by KORAIL, existing rail temperature measurements, and CWR researches. Therefore avoid the excessive plan of the first set-up section, choice the proper time in the normal temperature that is possible to weld the rail, turning the difference of rail temperature and Installation temperature down is desirable.

• Journal of the Korean Geophysical Society
• /
• v.8 no.3
• /
• pp.109-113
• /
• 2005

The ground-motion (GM) attenuation relations available in Korea has required the validation process for large earthquakes since most of them were developed based on small earthquake database. The Fukuoka earthquake (M=7.0) that occurred near the Korean Peninsula provides invaluable data to indirectly evaluate the attenuation characteristics of the strong GM in Korea. The GM levels (PGA, SA) obtained from the KIK-net downhole stations near the epicenter (R<100km) are reasonably predicted by the GM attenuation relation developed by KEPRI in 2003 for the Kori NPP site, the result of which validates the use of KEPRI GM attenuation relation for predicting GM induced by future large earthquakes. Also, the comparison between the Osaki spectra and response spectra of KIK-net downhole data reveals that the amplitude levels of Osaki spectra are higher than the spectra from KIK-net stations which are believed to be installed at the seismic basement.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.37-44
• /
• 2016

$CO_2$-EOR (Carbon Dioxide-Enhanced Oil Recovery), one of the enhanced oil recovery methods, helps to not only enhance the production of oil, but also store carbon dioxide in underground. However, if micro fractures occur when during the injection of $CO_2$, it is difficult to make permanent storage of $CO_2$ in reservoir and can cause contamination of groundwater and soil. Therefore, in this study, we performed microseismic monitoring to investigate the occurrence of fractures during the $CO_2$ injection at the Meruap oil reservoir, Indonesia. To pick the first arrivals of microseismic events, Improved MER (Modified Energy Ratio) method was used. After picking the first arrivals, hodogram analysis was carried out by using the data recorded at three component geophones to calculate the back azimuth of events. Finally, locations of microseismic events were decided by using the results of first arrival picking and hodogram analysis. Estimated locations showed that all microseismic events were occurred at surface and any fracture did not occur around the reservoir. Moreover, by analyzing noise characteristic, we confirmed that almost of picked first arrivals were due to the repetitive mechanical noise.

• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.193-204
• /
• 2014

Shale gas has caused a change in the dynamics of gas market since development of horizontal drilling technic and hydraulic fracturing technic caused its commercial production. The commercial amount of shale gas is 187.5 trillions $m^3$ so human can use it for 59 years and the amount will increase in the future. Several nations such as USA, Canada, China and Russia have more and more interested in shale gas as a futuristic major energy source. In accordance with this trend in the world, the amount of studying theses for development of shale gas have increased so their theses became important increasingly. The number of searched theses (1986 ~ The first half of 2013) is 3,468 and has increased recently. Among 89 nations studying shale gas, USA has 637 theses as No.1 in the world. 1,813 global studying institutes have studied shale gas; in the analysis result of several studying institutes, US geological survey institute was ranked as No.1 for the quality level of shale gas study and intensity of global cooperation.