• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.884-886
• /
• 2004

This paper introduces Flux-Reversal Machine(FRM) and presents the design of a single phase FRM to improve its starting torque. The effects of the design parameters on the characteristic and starting torque are analyzed by Finite Element Method(FEM). The considered design parameters are tapered airgap, stewed airgap, asymmetric PM width and slotted teeth. As a result, we can find the best model in producing starting torque of a single phase 2/3 FRM

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.158-159
• /
• 2017

본 논문에서는 매입형 영구자석 동기전동기를 위치센서 없이 기동하기 위해 회전자의 초기 위치를 추정하는 방법을 제안한다. 제안된 방법은 자기 인덕턴스의 포화현상에 따른 고정자 전류를 해석하고 최소자승법을 통해 회전자의 초기 위치를 추정한다. 전 구간에서 회전자의 초기 위치와 극성을 정확하게 알아낼 수 있어 돌극성 때문에 나타나는 릴럭턴스 토크를 효과적으로 사용할 수 있다. 또한, 전동기 정수에 영향을 받지 않으므로 다양한 전동기 구동 시스템에 적용할 수 있으며, 추가적인 하드웨어가 필요하지 않아 경제적이다. 제안하는 방법의 유효성과 우수성은 시뮬레이션을 통해 검증한다.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.86-88
• /
• 2005

The line-start permanent magnet synchronous motor has a high efficiency and an advantage in constant speed operation regardless of the effect of load variation. However it is difficult to predict the performance of characteristics accurately, because of the unbalanced starting torque with the initial starting position of the rotor and the generation of a break torque. In this paper the dynamic characteristics of the line-start permanent magnet synchronous motor arc described and compared with those of the squirrel-cage induction motor through the simulation to find the characteristics of the permanent magnets and the rotor bars in the line-start permanent magnet synchronous motor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1085-1090
• /
• 2011

To assure the safety of rolling stock, it is important to perform the fatigue analysis of reduction gear unit in rolling stock considering a variation of velocity and traction motor capability. This paper presents fatigue analysis of the damage of reduction gear unit of railway vehicle under variable amplitude loading(VAL) based on quasi-static fatigue analysis using finite element model and linear Miner's rule. The VAL for the simulation was constructed from the tractive effort curve and train run curves of railway vehicle under commercial operation condition using MSC.ADAMS dynamic analysis. The finite element model for evaluating the carburizing effect on the gear surface was used for predicting the fatigue life of the middle gear based on strain-life based approach. The results showed that the frequent high starting torque due to a quick start as well as increasing numbers of stops at station would decrease the fatigue life of reduction gear unit.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.3
• /
• pp.88-96
• /
• 1995

High speed elevator requires precise drive included in zero speed at start/stop drive for the high stability and controllability. The vector control techniques, which have been used for the precise operation of induction motor, can be divided into two classes; The indirect vector control by slip frequency and the direct vector control by field orientation. The existing direct vector control technique has a robustness against the change of motor parameter and the existing indirect vector control technique has a strength of control ability in the wide speed range comparatively. This study presents the DTIF (Direct Torque Indirect Flux) controller which has robust movement in the transition state and in about zero and low speed using the control technique in which torque is controlled by the direct vector technique and flux is controled by indirect vector technique. The proposed system is verified by simulation and experiment for driving 3 phase induction motor. The process of transition which is from about zero speed and low speed to high speed is compared and measured to specification of phase voltage, phase current and DC link current. It is verified that DTIF controller show robust and stable speed variation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.73-80
• /
• 2005

Biped robot requires that an energy source and a control part should be installed on the body to realize active system. So, we choose the DC motor having high torque in compact size in this study. In the DC motor serve system, we choose power amplifier with analog configuration, developed the module combined the controller and the driver. We applied this module to robot actuator and studied the response characteristics in an action and a return. Main controller with serve system, loading PIC micro controller, can be load on the robot with light weight.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.40-46
• /
• 2012

The single-phase switched reluctance motor(SRM) has only one inductance variation and the positive torque is generated in the restricted section. So, it cannot be started by itself. To solve this problem, many researchers have addressed the several starting method for the single-phase SRM. This paper is focused on the torque characteristics of the single-phase SRM according to starting method. The four major starting method - permanent magnet, saturable stator pole, to grade the rotor, stepped rotor pole - is selected to analyze the torque characteristics. The analysis model of each starting method is designed to changed the pole shape or inserting other material in the basic model. The torque characteristics of each analysis model is obtained by using FEM analysis. The FEM analysis is performed at incremental rotor positions over half inductance cycle in any one pole with 250AT, 500AT, 750AT. The distortion factor of each analysis model is analyzed through the FFT to compare the distortion between basic model and four analysis model.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.408-412
• /
• 2010

The single-phase switched reluctance motor(SRM) generates the positive torque in the restricted section. So, it can not started by itself and the torque ripple is heavier than poly-phase. For self-starting and fixing rotating direction, the rotor should be placed at the rising inductance slope when stationary. The parking permanent magnet locates the rotor in the fixed position, which can be started by it-self. It is very simple and cost effective but has some drawbacks. It affects the rotor during the operation, so the characteristics of motor, such as a torque, speed, and ripple are changed to go bad. This paper presents the detent torque of parking magnet starting device through the finite element analysis and experiments. The finite element analysis is performed at incremental rotor positions over one detent torque cycle for any one pole. The prototype, fabricated in the previous research, is used for the experiments. The inductance, instant torque, and detent torque are calculated using the terminal voltage and phase current. Finally, the finite element analysis result and the experiment result are compared for analysis and validity.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.299
• /
• pp.70-75
• /
• 2001

최근 몇 년 사이 설비투자가 억제되어 고경년(高經年)변압기나 과부하로 운전조건이 어려워진 변압기가 증가하고 있으며, 이에 따라 기기의 운전신뢰성 유지와 정비$\cdot$보수를 위한 토털코스트의 삭감 요구가 제기되고 있다. 변압기의 운전신뢰성을 유지하기 위한 센서 및 장치는 점검$\cdot$순시의 지원, 이상징후의 검출은 물론 기기의 상태를 정확하게 파악함으로써 적절한 유지보수의 지원을 목적으로 하는 것이 제품화되어 있다. 이와 같은 변압기의 감시$\cdot$진단센서 기술과 IT(정보기술)를 이용한 IT화 대응 변압기 유지보수지원시스템을 개발하여 공장내의 실(實)변압기에 설치, 실용성을 확인하였다. 이 시스템은 기존의 광역네트워크를 사용하여 유지보수거점에 위치하면서 원격지의 변압기 운전상태와 감시$\cdot$진단정보를 필요에 따라 액세스할 수 있도록 되어 있으며, 유지보수거점에서는 기기감시서버내의 데이터와 화면을 임의로 액세스할 수 있고 유지보수정보의 공유화와 이상검출시의 유중가스센서의 기동, 부하시 탭전환장치(LTC)의 토크파형 표시에 의한 조기대응과 이상해석$\cdot$진단정도(精度)의 향상에 효과를 발휘할 수 있다. 시스템은 변압기의 중요성, 토털코스트에 맞추어 구축된다. 이 때문에 센서, 각 장치간의 데이터 전송에 대해서는 온라인, 오프라인 및 각종 I/F를 준비하여 시스템의 선택성$\cdot$확장성을 고려토록 하고 있다. 차후 IT화 대응 유지보수지원시스템이 변압기 운전신뢰성 유지와 유지보수코스트 삭감에 효과를 발휘할 것으로 기대한다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.682-684
• /
• 2015

A 12/14 bearingless switched reluctance motor (BLSRM) with hybrid stator poles has been proposed due to the outstanding decoupling characteristics between the torque and suspending force. However, the motor is a two-phase motor. The output torque of the motor has torque dead zone and high torque ripple. Hence, the motor cannot self-start at some rotor positions. To solve the self-starting problems and reduce the torque ripple, a stepped rotor is proposed in this paper. Then, the motor with the stepped rotor is optimally designed. In the new designed motor, the majority parameters are kept the same with those of original motor; only the torque pole arc and rotor pole shape are optimally designed. The characteristics of the redesigned motor, such as inductance, torque and suspending force, are analyzed and compared with those in the original motor. Finally, the effectiveness of the proposed method is verified by the simulation results.